Kenmore 100.82002, 100.80002, 100.81002 User Manual

Use & Care Guide

10-Cup Capacity

Food Processor

Model No.

100.80002 - Black

100.81002 - White

100.82002 - Red

CAUTION: Read, understand and follow
at] Important Safeguards and Operating

Instructions in this Manual before using

this product,

Sears, Roebuck and Co,,
Hoffman Estates, IL 60179 UoS,Ao
www.kenmore, com

KENMORE FULL WARRANTY
If this product fails due Io a delact tn malarial or workmanship wilhin two years from the

date of purchase, return il to any Sears store or other Kenmore outfet in the Un[Led States
for free replacemenL

This warranty does not include expendable parts, such as filters or blades, which can wear
out from normal use within the warranty period

This warranty applies for only 90 days il this product is ever used for olher than private
household purposes

This warranty applies only whIis this producl is used Inthe United States
Th}s warranty gives you specific tegai rights, and you may also have other fighLs which vary

from state to state..
Sears, Roebuck and Co, Hoffman Estates, IL 60179

When using eleclrlca! appliances, basic safety precautions should always be
followed, Including the following:

I Read allinstructions.

2- To prolecl against risk of e[eclrical shock do not put Food Processor in water

or other liquid.

3 Close supervision is necessary when any appliance is used by or near children.
4 UNPLUG from outlet when not in use, before putting on or taking elf parts,

and before cleaning

5. AVOID contact with moving paris
6 DO NOT operate any appliance with a damaged cord or plug, or after the appliance

malfunctions or has been dropped or damaged in any manner Return apphance to
the nearest authorized sewice facitity for exarninalion, repair or adjustment

7 The use of accessory attachments not recommended or sold by the manufacturer

may cause fire, electric shock or persona! iniury

8 DO NOT use outdoors
9 DO NOT let the cord hang over the edge of tabEeor counter

10 Keep hands and utensils away from moving blades or discs white processing feed

to reduce the risk el severe injury to persons or damage to Ihe food processor

A scraper may be used but must be used only when the Iced processor is not running
11 Blades are sharp Handle carefully
12 To reduce the risk oi injury,never p_ace cutting blade or discs on base wilhout first

putting bowl properly in place
13 Be certain cover ts securely rocked In place before operating appliance

14NEVERteedfoodbyhandAlwaysusefoodpusher
15DO NOT attempt to defeat the cover interlock machanism

16 To protect against eleclrtcal shock, tNs appliance is equipped with a cord having

a 3-prong grounding-type plug for Insertion tn!o a proper grounding-type receptacle
DO NOT atter the pJug for use in a 2-prong reeeplacle If the plug wiII not _l into

a receplacte, have the proper receptacle installed by a qualified electrician

17 SAVE THESE INSTRUCTIONS!

Fig,, 1

Food
Chute

Slide
Bulton

_r

Loop

;hute

Conlml
Knob

Bowl

Center

Post

Stem

SficetShred Disc

Chopping Blade

Beforeusinglhefoodprocessor,washallparisexcepItheBaseinhot,soapywater
RinsedryThesepartscana_sobeplaced in the dishwasher on the top rack Do not

put in or near the ulensit basket,,

CAUTION: CAUTION: Bledes are sharp Handle carefully..

CAUTION: NEVER place food pmcessor's motor/base in water

or other liquids_

NOTE: DO NOT attempt to chop ice in this Food Processor; it wil! damage the
Bowl and dull the Chopping BiadeoThis unit will not whip cream, beat egg
whites to a desirable volume, grind coffee beans, spices or other items with
high oil content, or slice or shred hard-cooked eggs, marshmallows,

or soft cheeses.

IMPORTANT: For your protection, this unit has an Interlock system..
The Processor will not operate unless the Bowl Is properly locked onto

Base and Cover is properly locked onto the Bowl, Do not attempt to operate
the unit without the Bowl, Bowl Lid, and Food Chute Lid correctly in place,

ASSEMBLY

1 Make sure lhe Control Knob Switch isin lhe OFF position and the power cord

is unplugged.

2 Be sure Food Processor base is on a flat, dry, clean, stable surface before you

begin processing,

3 To assemble, put the Bow} en the Base by aligning Ihe Bowl handle with the un{ock icon

on the base, Turn the Bow] counterclockwise until tlclicks into place (see Fig 2 and 2a).

The Bowl handle should now tace straight to the center front

NOTE: There Is only one position for the Bow1 to lock onto the Base The unil will not operate
if the Bowl does net lock onto the Base.

ASSEMBLYcont.

"x

,t On the Bowl Cover are the load chute, food chule lid, and movable loop, which serves

as a housing for the food pusher Also included is the shaft conlainlng the spring
mechanism that controls the slide button used to lock the food chute tid into place

These are part of the Bowl Cover assembly

5 Place the Bowl Cover Assembly onto the Bowl Align the arrow on the Cover and the

unlock Icon on the Bowl (see Fig- 2 and 2a) Turn the Cover counterclockw}sa towards
the center frontuntil itclicks

NOTE: There is only one position for the Bowl Cover to lock onto Bowl The unit will no!
operate if the Bowl Cover does not lock onto the Bowl, o[ ff the Food Chute Lid does not

lalch onto the Food Chute

6 Make sure the food chute lid is securely latched inlo place.
7 To open the Food Chute Lid pullthe Slide Release Button out Lifl the Food Chute Lid

and Movable Loop (see Fig 3 and 3a) up and back to open

Fig,3a

/_Flgo3

B. When the food pusher is not being used to feed items down through Ihe food chute,

It should be locked into place tn the movable loop This Is usually the case when using
blades down in the bowllnstead of discs at the top of the bowl.

When locked together, the food pusher and movable loop can also act as one larger food

pusher To lock the food pusher into the movable loop. slide the tab located on the food
pusher into the slot on Ihe dm of lhe movabte loop

5