Kenmore 100.82001 User Manual

Use & Care Guide

Blender

3 Speed

Model No.

100.80001 " Black

100.81001 - White

100.82001 " Red

CAUTION; Read, understand and follow

alt Important Safeguards and Operating
Instructions in this Manual before using

this product

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A,

www.ken more.com

WARRANTY

KEMMORE FULL WARRANTY
!l this prodLic! iaiiB due to a detect in maleriai or workmanship within two years (rom the

date of purchase, return It to any Sears store or other Kenmora oultat in the United States
ter frea replacement

This warranty does not inciutia expendable parls, such as tillers or Wades, which can wear
out from normal use withte the warranty period.

This warranty applies tor only 90 days it this product Is ever used (or other than private
household purposes

This warranty applies only while this product is used in the United States.
This warranty gives you specific iegaf rights, and you may also have other rights which

vary from slate to slate
Sears, Roebuck and Co, Hoffman Estates. IL 60179

IMPAPTAMT

I twi rt W rS I MN : IО Af" CVI UAH UP

When using elecirlcal appliances, basic safety precautions should always
be followed, Including the following:

1 READ all Instructions.

2 To protect against risk of eiaclrica! shock do not pot blender in waiar or other liquid.
3, Close supervlsfort is necessary when any appliance Is used by or near children.
4 UNPLUG from outlet when not in use, before putting on or taking of! parte,

and before cleaning.
5 AVOID contact with moving parts
6 DO NOT operate any appliance with a damaged cord or plug, or after the appliance

malfunctions or has been dropped or damaged In any manner Return appliance to

the neatest authorteed service facility for examination, repair or adjustment
7 The use of attachments, including canning jgrs, not recommended by the appliance

manufacturer may cause a risk of injury lo persons
B DO NOT usa outdoors,

9. DO NOT 1st the cord hang over the edge of table or counter

10 Keep hands and utensils out of conlainsr white blending to reduce the risk o( severe

Injufy to persons or damage to the blender A scraper may be used, but must be
used ONLY when the blender is not running

11 B lades are sharp. Handle careiutty.

IMPORTONT SAREGÜARDS

12. To reduce (he risk of injury, never place cuHer-assembly blades on base wilhouf
jar properly attached .

13. ALWAYS operate blender with cover In place

14. When blendirtg hot liquids, remove meastrSrtp cup from the two*piece IW.
Do not fill jar beyond 3-cup level

15 To protect against electrical shock, this appliance is equipped with a cord having

a 3-prong grounding-type plug for insertion into a proper grounding-lype receptacle.
DO NOT altar the plug for use in a 2-prong rsceptacie It the plug will not fit into
a rBcepiacle. have the proper receptacle Installed by a qualiited electrician

PREPARING YOUR BLENDER

1 Before assembling your blander, wipe blender base with a warm sudsy Dioih,

then wipe dean with a damp cloth. Dry with a soft doth Wash blender jar, lid, collar
and blades in warm, sudsy water Rinse and wipe parts dry

2 Turn bIsndBf lar upside down Place the

gasket on the blade assembly (Flg.2)

3 Place the blsda assembly with the gasket

in the bottom opening of the jar (Flg-3),

4 Twist collar onto jar Be sure to engage

threads properly and securely |Fig.4).
Turn assembled jar right sida up (Fig5)

CAUTION: Blades are sharp. Handle carefully.

CAUTION: NEVER place blender's motor&asa in water or other liquids.

OPERiriNG YOUR BLENDER

Hg.S

Your blender has been designed to work
in a varieiy of ways to suit your blending needs

Ones you piup the blander in, it llluminatBs
to show what mode it is in, You can easily
contfoi its function by a simpis push of the
bultorrs and turn of the control switch

This blender has a soft start function when
used in Uie norma! ON position with either
the High or low speed (Fig, 6)

1 Make sure the Control Switch is in the OFF position and the power cord is urtplugged.

Í Place Slender motor/base on a dry, level, stable surface-

3 Set Jar assembly into place on motor/base, making sure motor/base and jar are

securely lightened into place.

4 Place the food solids and liquids to bs blended into the Jar and put the !ld on the jar

before blending, 8b sure the measuring cup is in place to the middle of the ltd

5 Plug power cord Into a standard

120-V, 60 Hz AC-only,
3-prong aisctricai outlet

Fig. 7

The OFF incficaior should be

iliumlnated to show that the blender is
plugged in and that lha Control Switch
is in the OFF position (Fig,?),

OPERATING YOUR BLENDER

a Turn the Control Switch to turn the unit ON. The ON indicator wilt illuminate green.

Press and release the High or Low
button to start blender. The button y^ou
press will Illuminate green, The blender

You can also turn the blender OFF by
turning the control switch to OFF.

The los Crush button is the highest and
strongest speed of the blender.

In the Ice Crush speed, the Mender will
stay on only as long as you keep
pressing the tatton. As soon as you
stop pressing, the blander will turn
OFF (Rg.8).

7. To run the blender intermittently rather than continuously, lurrr the Control Switch to
PULSE, When the blender Is In PULSE mods, the PULSE indicator light flashes
green and the button you press for either High, Low or Ice Crush wlji only stay on
as long ae you are pressing the button. As soon as you stop, the blender will
lurn OFF,

■■ ‘ " you press the

WARNING:

blades.

Flashing light Indicates ready to operate. Do not touch

8, To arid food or fruit to the Jar while the blender is running, remoys the msasurlng cup

in the middle of the lid Add the food or tru1t througii the hole In the middle of the lid
and then replace the measuring cup on lid

NEVER .start up the blender without the lid m place. The speed of the blsctes will
Ihrow contents high up in the jar and without the lid it could spili out

NOTE: Only operate blender In one speed at a tima.

BLENDER TIPS AND TiCHNIQüES

Cut Iruit into about 3/4-tnch long pieces
To best circulate foods or frul! that are to be bfended with liquid, pour the liquid Into the

jar first, then add the solid foods or fruit.
Some tasks cannot be performed efficiently with a blender. These are: Beating egg whites,

whipping Cfsam, mashing potatoes, grinding meats, mixing dough, and extracting juices

from fruit and vegetables

The foliowing items should never faa placed in the blender jar. as they cart cause damage:
Bones, large pieces of solid frozen foods, or danse, tough foods such as turnips..

To crush ice, ALWAYS have liquid In Ihs |ar, Start out with 2 cups of liquid, and add about

2 cups of ice cubes Hold one hand firmly on the lid. Pulse the ica Crush butters

it fisore ice Is needed, remove the measuring cup In the middle of the lid and add cubes
orsa at a time through tha hols in the lid. DO NOT CRUSH ÍCE WITHOUT LIQUID

Failure to follow these directions cars result in damage to tha blades, jar, blersder motor,
and possibly resull In persona! Injury

UAKc ANU vLc

if you should ever need replaoerrsenl parts ter this blender, contact Sears Paris and
Repair Service at 1-6DO-4~MY-HOME*

1, Before cleaning, turn the control knob switch to OFF and unplug the blender

2, Rinse parts (jar. blade assembly, gaskel, collar, lid and measuring cup inner lid)

immediately alter blending tor easier cleanup

3 - All removable parts can be washed by hand or In a dishwasher The lid, measuring

cup, collar, gaskel and blade assembly should be placad in the top rack only
Disassemble belore placing in the dishwasher.The jars are bottom rack
dishwasher-safe Do not place the jar or any other parta in boiiing liquids

4. The motar/base Is designed to be resistant to liquids, if liquids spill Into tha molor/basa

• Unplug the moior/base

• Wipe with a damp doth and dry thoroughly

5. Do not USB abrasive scouring pads or cteaners on bass as finish may become
scrafched or damaged

, íá |l I : |>> I r- A ly|]

Get it fixed, at your home or ours!

Your Home

For repair - in your home - of ait major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold itl

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself

For Sears professionai installation of home appliances

and items like garage door openers and water heaters

1 -800 -4-MY-HOM E® Cal! srtySime, day or night

(1-800*469-4663) (U S A. and Canada)

wwwsears.coin wwwRBarsca

For expert home sotutlans attv/ce: www managamytiome cem

Our Home

For repair of carry-in products tike vacuums, lawn equipment,

and electronics, call or go on-line for the nearest

Sears Parts & Repair Service Center

1-B0D-4B8“t222 (U S A ) 1-800-469-4663 (Canada)

Cell anytime, day or night

www.aearB.com wvvw.saafs.ca

To purchase a protection agreement on a product serviced by Sears;

1-800-827-6655 (USA) 1-600-361-666S (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas;

1-8BB-SU+IOGAR©

(1-8e8-7B4-6427)

Au Canada pour service en français-

1-8004.E-FOYERWC

(i-eoo-ss^easT)

www sears ca

BSeasgmncb.LiC

•Si Segisteftid Trademark / TfadomsTk / Service Mark of Scarri Sranris, LtC
® Matea RftgJsItacia I ™ Mstca ds Fábrica I Matea tfe Servicio ûe Seare aranda LLC
“ Marqua da comiasica I *® Marqua déposés ds Sears Brartiis, LLC