Ken A Vision PupilCAM 1401KRM, PupilCAM 1401KR, PupilCAM 1405KR, PupilCAM 1401KRN, PupilCAM 1405KRN Instruction Manual

5615 Raytown Road, Kansas City, MO 64133 U.S.A Tel. [phone]

Fax. [phone] Email: [e-mail] www.ken-a-vision.com

To learn more about other Ken-A-Vision products

and services please visit our website at

www.ken-a-vision.com

Or call 1-816-353-4787.

Information To The User:

Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 o the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordiancewith
instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio reception which
can be determined by turning the equipment off and on, the user is
encouragedto try to correct the interference by one or more of the following
measures: Reorientor relocate the receiving antenna and/or increase the
separation distance between the equipment and the receiver, and/or
connect equipment into an outlet on a circuit different from that which the
receiver is connected; and/or consult your dealer or experienced radio/tv
technician for help.

Instruction Manual

kav.instrct.puplcam.pc.v2

Ken-A-Vision

Ken-A-Vision

PupilCAM

PupilCAM

®

®

Ken-A-Vision reserves the right to make design improvement and other changes in accordance with the latest
advances in technology. There is no obligation to make changes in products already manufactured.

1401KR (USB)

1405KR (USB pk 5)

1410KR (USB pk 10)

1401KRN (Video)

1405KRN (Video pk 5)

1410KRN (Video pk 10)

cat#: INS-PC

Connecting The Video/Power Cable

Your Video/Power cables are pre-attached to the PupilCAM. No connection
is required to the camera. Simply connect the video cable into the “video-in”
on your TV/monitor. Then connected the power supply to the power cable.
Next connect the other end of your power supply to 110 volt (or 220 volt)
electrical outlet.

Connecting to a Microscope

The PupilCAM®is designed exclusively to work
with a microscope (compound or stereoscope).
A variable eyepiece adapter is built-in to the
camera.

• Gently twist the PupilCAM® as you push it
down the onto the microscope.

• Connect the pre-attached cable to your

TV/monitor or computer.

• Put a slide on your microscope and focus.

SYSTEM REQUIREMENTS

4mb Video Card (16bit color), 60mb of free hard disk space 64mb of RAM,
233mhz Pentium, Windows 98 or higher, Microsoft Internet Explorer 4.0

WARRANTY

To activate the one (1) year limited warranty on your new PupilCAM, simply fill
out the enclosed warranty page, and return it to Ken-A-Vision Inc. Failure to

return your warranty card will limit your PupilCAM warranty to
90 days. Returns and repairs may be handled through your local dealer or

directly with Ken-A-Vision. The warranty will not apply or if the product has
been tampered with, disassembled or damaged by misuse, accident, modi­ficationor unauthorized repair.

PupilCAM

®

Thank you for your purchase of a Ken-A-Vision PupilCAM! This high­resolution camera captures microscopic images and displays them directly to
your TV/monitor or computer with full screen viewing. The pre-attached
cables provide direct interface to your monitor. It’s ready to go, no assembly
required!

Connecting The USB Cable

Prior to connecting the USB cable, you must first install the supplied soft­ware.

Pre-attached cabling makes it easy to connect the USB cable to you com­puter.Simply insert the rectangular end of USB cable to the USB port of
your computer. Note: The USB port will supply ample power to the the
PupilCAM®. No power supply is required.

PupilCAM Specifications

Ken-A-Vision is not responsible for any malfunctions that may occur with the use of this product with other products from
your computer.

Camera Sensor

Effective Image Size

Pixel Resolution

TVResolution

Pixel Size
LUX
S/N Ratio
Supply Voltage)
Operating Temperature
Weight
FPS (frames per second)
Focal Distance
Eyepiece adaptor (built in)

Digital CMOS USB connection
CCD Video connection

640 x 480 (VGA)
352 x288 (CIF)

640 x 480 (VGA)
352 x 288 (CIF)

500 lines

7.5 mm x 7.5 mm
<1.0
57 dB minimum

3.3V-6.0 V DC+ 5%
0oC -4oC

0.13 kg (0.0128 lbs)
30 fps
Preset for Microscopic eyepiece

27.5.0 mm - 30.0 mm

---