Kempton Plywood PW 10, Plywood PW 12, Plywood PW 15, Plywood PW 215, Plywood PW 18s Specifications

Kempton’s PW Series

speaker enclosures are

the perfect compliment for

high power live sound and per-

manent installation applica-

tions. Featuring quality

custom designed woofers, and

quality compression drivers

that are coupled to a constant

directivity 80°H x 50°V horn in

plywood enclosures. The acou-

stically contoured crossover

network provides full protec-

tion for both LF woofers and

HF drivers.

Model PW 10 PW 12 PW 15

System Configuration Way 2 - full range 2 - full range 2 - full range
Recommended amplifier W rms 200 250 300
Long term power AES W 100 125 150
Short-term power IEC268-5 W 400 500 600
Nominal Impedance ohm 8 8 8
Frequency response @-6dB 68Hz - 20kHz 56Hz - 20kHz 53Hz - 20kHz
Low frequency woofer inch 10” (1,5” coil) 12” (2” coil) 15” (2” coil)
High frequency compr. driver inch 1” (1,4” coil) 1” (1,4” coil) 1” (1,4” coil)
Sensitivity @1W/1m dB 93 97 98
Max SPL dB 116 121 123
Dispersion H x V 80°x50° 80°x50° 80°x50°
Crossover frequency kHz 3 2,5 2
Recommended HP filter 45Hz - 12/24 dB oct. 40Hz - 12/24 dB oct. 35Hz - 12/24 dB oct.
Recommended ext. filter - - ­Input connectors 2x4-pin speakon 2x4-pin speakon 2x4-pin speakon
Net dimensions (W x H x D) mm 360x595x300 405x642x380 453x728x418

inch 14,17x23,42x11,81 15,94x25,27x14,96 17,83x28,66x16,45

Net weight Kg 11,5 18 21

Lb 25,35 39,68 46,29

Applications

Live Front of House Sound Reinforcement in Clubs, Discos, Piano Bars,

Conference Halls, Houses of Worship, Sports Arenas, Schools, Theatres,

Mobile D.J. use, Foreground Music Reproduction, etc.

PLYWOOD ENCLOSURES

PW

PW 215

PW 10

PW 15

Cabinet Enclosures

15mm, (

5

/8”) plywood is used in the construction
of cabinet enclosures on all models. The use of
solid glue joints and the critical placement of
internal bracing results in enclosures that vir­tually indestructible as well as resonance-free.

Shape: Maximum Versatility

The Asymmetrical trapezoidal design shape with a
45° angle provides for Stage Monitor use and
Front of House applications (PW10-PW12-PW15).

Finish

Durable textured black paint is used to with­stand to the rigors of the road when transpor­ting and provide a stylish appearance for perma­nent installations.

Pole Mount Sockets & Handles

For speaker stand mounting, all PW models are
equipped with a 35mm
Ø (1

3

/8”) aluminium pole
mount socket.
Ergonomically placed
integrated handles are
built into the 100%
plywood structure of
the cabinet enclosure.

Heavy Duty Grilles

An extremely rugged

1.2mm (0.05”) steel
grille with high apertu­re ratio protects the
speakers without
detracting from their
sonic performance in
any way.

Rigging / Fly Points

All Kempton PW enclo­sures are provided
with multiple M10 fly
points (M6 on PW10)
to accept standard
eye bolts and facilitate safe and easy flying capa­bilities.

Connectors

All Kempton PW model Speakers feature profes­sional 2 x 4-pin Speakon connectors that are
mounted to a recessed panel to prevent inadver­tent operation.

Components

All components were carefully selected and
manufactured to Kempton’s specifications and
tolerances and then severely tested for reliability
for the Kempton PW Speaker series. The custom
designed Woofers feature high strength curvili­near cones on die cast frames, high temperatu­re resistant voice coils to prevent burnout failu­res and ferrite magnet structures to produce
solid low frequency response. The HF compres­sion drivers provide clean and clear high fre­quency output and are coupled to an 80°H x 50°V
custom designed constant directivity horn for
precise dispersion.

Crossover Networks

The Heavy Duty Crossover Networks that divide
the signal going to the woofer and compression
driver are constructed with oversize coils, high
voltage capacitors and power resistors to provi­de the best possible sound quality and minimize
signal loss. Independent LF and HF overload pro­tection circuits are employed to protect the woo­fers and HF drivers from failures.

Model PW 215 PW 18s

System Configuration Way 2 - full range 1 - subwoofer
Recommended amplifier W rms 600 500
Long term power AES W 300 250
Short-term power IEC268-5 W 1200 1000
Nominal Impedance ohm 8 8
Frequency response @-6dB 53Hz - 20kHz 38Hz - 300kHz
Low frequency woofer inch 2x15” (2” coil) 18” (3” coil)
High frequency compr. driver inch 1” (1,4” coil) ­Sensitivity @1W/1m dB 101 98
Max SPL dB 129 125
Dispersion H x V 80°x50° omnidirectional
Crossover frequency kHz 2 external
Recommended HP filter 35Hz - 12/24 dB oct. 28Hz - 12/24 dB oct.
Recommended ext. filter - LP 90Hz 12/24dB oct.
Input connectors 2x4-pin speakon 2x4-pin speakon
Net dimensions (W x H x D) mm 495x1155x480 500x615x642

inch 19,48x45,72x18,89 19,68x24,21x25,27

Net weight Kg 34,5 29,5

Lb 76,05 65,03

PW 12PW 18s