KEMET F3103B User Manual

INDEX

Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Outline Drawing & Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Marking & Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

T190/T290 (CLR90) MIL-PRF-39006/30 Series Part Number Ratings . . . . . . . . . . . . . . . . . . . . . . . .12-15

T191/T291 (CLR91) MIL-PRF-39006/31 Series Part Number Ratings . . . . . . . . . . . . . . . . . . . . . . . 16-17

T192/T292 (CLR79) MIL-PRF-39006/22 Series Part Number Ratings . . . . . . . . . . . . . . . . . . . . . . . .18-21

T195/T295 (CLR81) MIL-PRF-39006/25 Series Part Number Ratings . . . . . . . . . . . . . . . . . . . . . . . 22-23

T197 Series - High Temperature Wet Tantalum Series Part Number Ratings . . . . . . . . . . . . . . . . . . 24-25

T198 Series - High Temperature Wet Tantalum Series Part Number Ratings . . . . . . . . . . . . . . . . . .26-27

IMPORTANT NOTICE

KEMET Electronics Corporation disclaims all warranties, whether express, implied, or statutory as to any manner whosoever, including the condition of the equipment, its compatibility with specific requirements, its merchantability, or fitness for any particular purpose which extend beyond the description on the face thereof.

Furthermore, under no circumstances shall KEMET Electronics Corporation be liable for consequential, special, incidental or indirect damages resulting from the use or handling of this product.

Finally, KEMET Electronics Corporation does not assume any responsibility for the correctness of the information contained in this catalog. All design characteristics, specifications, tolerances, and the like are subject to change without notice.

Performance Characteristics

Introduction

KEMET wet tantalum capacitors are identified by the initial “T”, followed by a “Series” number. T19X designates commercial product; T29X is military grade in accordance with Military Specification, MIL-PRF-

39006. For detailed performance characteristics of the T29X series, please refer to the latest issue of the Military Specification. MIL-PRF-39006 establishes 1000 hour failure rate levels of 1%, 0.1%, and 0.01%. T29X series components are available in M, P, and R failure rates (1.0, 0.1, and 0.01, respectively).

Specific requirements are set forth in the respective Product Series in this catalog. All Military products are 100% electrically screened for the parameters shown in the respective product section. For non-military product, all series are 100% screened for leakage, capacitance and dissipation factor. All Series are inspected to electrical limits using a minimum .1% AQL sampling plans, according to the Military Standard MILSTD-105, even after 100% testing. This sampling plan, to the best of KEMET Electronics’ knowledge, meets or exceeds the generally accepted industry standard for similar products. KEMET capacitors may also be supplied, with prior agreement, to meet specifications with requirements differing from those of KEMET catalogs.

These Notes apply generally to all KEMET wet tantalum capacitors and illustrate typical performance under normal application conditions, except where noted. The intent of these Notes is to provide generalized information concerning performance characteristics.

1. General Application Class

Wet tantalum capacitors are usually applied in circuits where the AC component is small compared to the DC component. Typical uses known to KEMET Electronics include blocking, by-passing, decoupling, and filtering. They are also used in timing circuits. If two of these polar capacitors are connected “back-to-back” (i.e., negative-to-negative or positive-to-positive), the pair may be used in AC applications (as a non-polar device).

2. Storage Conditions

Capacitors may be stored without applied voltage over the operating temperature range specified in the catalogs for each Series. The range is from -55 to +125°C for all Series.

Storage at high temperature may cause a small, temporary increase in leakage current (measured under standard conditions), but the original value is usually restored within a few minutes after application of rated voltage.

DC leakage current may rise upon exposure to a combination of high temperature and high humidity, but is normally restored by voltage conditioning under standard conditions. The increase will be greater than that experienced under temperature influence alone because of conduction through absorbed water.

This Series may be affected by absorption of water on external insulating surfaces. The water film may also attract a layer of dust from the air increasing the effect. The most sensitive parameter is leakage current.

3. Polarity

These capacitors are inherently polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a polarity mark and the capacitor body may include an obvious geometrical shape. See paragraph 11 for Reverse Voltage capabilities.

4. Operating Environment

Most of the discussion under “Storage Conditions” will apply also when capacitors are operated within the applicable electrical ratings described below. The temporary increase in leakage current (at standard conditions) following elevated-temperature exposure is not observed, however, if the capacitors are operated with adequate DC voltage applied.

5. Capacitance

Capacitance is measured at 120 Hz and 25°C with up to 1 volt rms applied. Measured circuits are of high impedance, however, and under these conditions 1 volt rms may be applied even to 6 volt capacitors (23% peak reversal) without a DC dias. DC bias is thus normally not used, except when rated voltage is below 6 volts and the AC signal level exceeds 0.3 vrms. However, MIL-PRF-39006 provides for up to 2.2 volts DC. DC bias is not commonly used at room temperature, but is more commonly used at elevated temperatures.

DC bias causes a small reduction in capacitance, up to about 2% when full rated voltage is applied as bias. DF is also reduced by the presence of DC.

Capacitance changes very little below 1 kHz but decreases more noticably at higher frequencies. Larger capacitance values decline more rapidly than small ratings.

Capacitance typically changes with temperature according to the curve of Figure 1.

Figure 1. Typical Effect of Temperature upon Capacitance

6. Dissipation Factor (DF)

DF is measured at 120 Hz and 25°C with up to 1 volt rms applied. Note that, in either operation, peak AC plus DC bias must not exceed either rated voltage Measurement circuits are of high impedance, however, and under these conditions 1 volt rms may be applied even to 6 volt capacitors (23% peak reversal) without a DC bias. DC bias is thus normally not used, except when rated voltage is below 6 volts and the AC signal level exceeds 0.3 vrms. However, MIL-PRF-39006 provides for up to 2.2 volts DC. DC bias is not commonly used at room temperature, but is more commonly used at elevated temperatures.

Dissipation Factor (DF) is a useful low-frequency measure of the resistive component in capacitors. It is the ration of the unavoidable resistance to the capacitive reactance, usually expressed in percent. DF increases with temperature above +25°C and may also increase at lower temperatures. Unfortunately, one general limit for DF cannot be specified for all capacitance/voltage combinations, nor can response to temperature be simply stated. Catalogs for the respective series list DF limits under various conditions.

Dissipation factor increases with increasing frequency as would be expected from the decreasing capacitive reactance. DF is not a very useful parameter above about 1 kHz. The DF of larger capacitance values increases more rapidly than that of smaller ratings.

DC bias causes a small reduction in capacitance, up to about 2% when full rated voltage is applied, as bias, DF is also reduced by the presence of DC bias. Rated voltage may cause a decrease in DF of about

0.2% (e.g., a decrease from 3.6 to 3.4% DF).

DF is defined as ESR and is also referred to occa-

sionally, as tan d or “loss tangent.” The Quality Factor”, Q, is the reciprocal of DF (DF is not expressed in percent in this calculation). Another expression, rarely

used is the “power factor,” or ESR. Power factor is cos Ø, while DF is cot Ø. Z

7. DC Leakage (DCL)

DC leakage is affected by voltage to a much larger extent, and this effect can frequently be used to advantage in circuits where only very low leakage currents can be tolerated.

Figure 2. Typical Effect of Temperature upon DC Leakage Current

DC leakage current (DCL) increases with increasing temperature according to the typical curve of Figure 2.

Leakage current is measured at a rated voltage through +85°C and may also be measured at +125°C with 2/3 of rated voltage applied.

8. Rated Voltage

This term refers to the maximum continuous DC working voltage permissible at temperatures of +85°C or below. The lower operating temperature is specified as -55°C. Operation above +85°C is permissible, with reduced working voltage. The typical working voltage reduction is to 2/3 of rated voltage at +125°C.

9. Working Voltage

This is the maximum recommended peak DC operating voltage for continuous duty at or below 85°C without DC voltage surges or AC ripple superimposed. No voltage derating is required below 85°C. Capacitors may be operated to 125°C with working voltage linearly derated to 2/3 of the 85°C rating at 125°C.

Figure 3. Working Voltage Change with Temperature

10. Surge Voltage

Surge Voltage is defined as the maximum voltage to which the capacitor should be subjected under transient conditions, including peak AC ripple and all DC transients.

Table 1. Surge Voltage Ratings

A typical surge voltage test is performed at +85°C with the applicable surge voltage per Table 1. The surge voltage is applied for 1000 cycles of 30 seconds on voltage through a 1000 ± 100 ohm series resistor and 30 seconds off voltage with the capacitor discharged through a 1,000 ohm resistor. Upon completing the test, the capacitors are allowed to stabilize at room temperature. Capacitance, DF, and DCL are then tested:

1. The DCL should not exceed the initial 25°C limit.

2. The capacitance should be within ±2% of initial value.

3. The DF should not exceed the initial 25°C limit.

DC Working Voltage @ 85°C 6 8 10 15 25 30 50 60 75 100 125

Surge Voltage 6.9 9.2 11.5 17.2 28.8 34.5 57.5 69 86.2 115 144

Performance Characteristics

4. Capacitors show no visible mechanical damage or leakage of electrolyte.

11. Reverse Voltage

When subjected to a DC potential of 3 volts, applied in the reverse polarity direction for 125 hours ± 10 hours, capacitors shall meet the following requirements.

- DC Leakage: shall not exceed 1.25 times initial limit

- Capacitance: shall be within stated tolerance (K- ±10%, M- ±20%, J- ±5%)

- Dissipation Factor: shall not exceed initial limit

12. Equivalent Series Resistance (ESR)

Equivalent Series Resistance (ESR) is the preferred high-frequency statement of the resistance unavoidably appearing in these capacitors. ESR decreases with increasing frequency. Typical ESR limits are established in each specific product series. However, the ESR limits provided are for reference only, and are not necessarily the actual value that a particular Series product will attain.

Total impedance of the capacitor is the vector sum of capacitive reactance (Xc) and ESR, below resonance; above resonance total impedance is the vector sum of inductive reactance (XL) and ESR. See Figure 4.

To understand the many elements of a capacitor, see Figure 5.

Figure 5. The Real Capacitor

A capacitor is a complex impedance consisting of many series and parallel elements, each adding to the complexity of the measurement system.

ESL – Represents lead wire and construction

inductance. In most instances (especially in

tantalum and monolithic ceramic capacitors) it is

insignificant at the basic measurement frequen-

cies of 120 and 1000 Hz.

ESR – Represents the actual ohmic series resist-

ance in series with the capacitance. Lead wires

and capacitor electrodes are contributing sources.

RL – Capacitor Leakage Resistance. Typically it

can reach 50,000 megohms in a tantalum capaci-

tor. It can exceed 1012ohms in monolithic ceram-

ics and in film capacitors.

Rd – The dielectric loss contributed by dielectric

absorption and molecular polarization. It becomes

very significant in high frequency measurements

and applications. Its value varies with frequency.

Cd – The inherent dielectric absorption of the

solid tantalum capacitor which typically equates to

1-2% of the applied voltage.

As frequency increases, Xccontinues to decrease according to its equation above. There is unavoidable inductance as well as resistance in all capacitors, and at some point in frequency, the reactance ceases to be capacitive and becomes inductive. This frequency is called the self-resonant point. In wet tantalum capacitors, the resonance is damped by the ESR, and a smooth, rather than abrupt, transition from capacitive to inductive reactance (XL = 2πfL) follows.

Despite the fact that the reactance is nearly all inductive above the self-resonance, these capacitors find use as decoupling devices up to 10MHz.

ESR and Z are also affected by temperature. At 100 kHz, ESR decreases with increasing temperature. The amount of change is influenced by the size of the capacitance and is generally more pronounced on smaller ratings.

2πfC

1ohm

Xc=

where: f = frequency, Hertz C = capacitance, Farad

Figure 4a: Total Impedance of the Capacitor Below Resonance

XL = 2πfL

where: f = frequency, Hertz C = capacitance, Farad

Figure 4b: Total Impedance of the Capacitor Above Resonance

13.Power Dissipation

The power dissipation of this device is defined by the allowable ripple current rating as listed in the part number reference tables. These ratings reflect an internal temperature rise of +50°C at the +85°C ambient temperature with 40 kHz ripple life currents as specified in MIL-PRF-39006. These currents are established at these conditions, with the adjusted DC bias applied during the test.

The permissible AC currents applied to these devices at conditions other than those defined for the Ripple Life Test can be derived from the following table. This table is listed as Table II, in MIL-PRF-39006/22F.

The following rules apply to the ripple capability of these devices:

1. At +125°C, the rated voltage decreases to 2/3 of the

+85°C rated.

2. The positive peak of the applied AC ripple voltage plus

the DC bias cannot exceed the rated voltage of the

device, and the DC bias minus the negative peak of

the AC voltage cannot exceed the maximum allow-

able reverse voltage of the device.

3. The ripple current ratings within the part number tables

represents a maximum allowable internal tempera-

ture rise of +50°C at 40 kHz, and at an ambient tem-

perature of +85°C, and complying to rules 1 and 2.

4. The maximum allowable temperature rise decreases

linearly, to a +10°C rise at +125°C.

5. The ESR decreases with increasing frequency, and the

internal temperature rise is proportional the ESR of

the device.

6. The "% of +85°C Rated Voltage" defines the DC bias

level for the device.

14. Long-Term Stability

When stabilized for measurement at standard conditions, capacitance will typically change within +10% -20% during a 10,000 hour life test +85°C.

Dissipation factor data from 10,000 hour life tests at +85°C show that post limits (at standard conditions) are within 20% (max) of initial value at the conclusion of these tests.

Leakage current is more variable than capacitance or DF; in fact, leakage current typically exhibits a logarithmic

dependence in several respects. MIL-PRF-39006 permits leakage current (measured at standard conditions) to rise by 25% at 85°C over 10,000 hour life tests.

15. Failure Mode

Capacitor failure may be induced by exceeding the rated conditions of forward DC voltage, reverse DC voltage, surge voltage, surge current, power dissipation, or temperature. As with any practical device, these capacitors also possess an inherent, although low, failure rate when operated within the rated condition.

One failure mode is by short-circuit. Minor parametric drifts (see Section 14 “Long Term Stability”) are of no consequence in circuits suitable for wet tantalum capacitors. Catastrophic failure occurs as an avalanche in DC leakage current over a short (millisecond) time span. The failed capacitor, while called “short-circuited”, may exhibit a DC resistance of 10 to 104ohm.

If a failed capacitor is in an unprotected low-impedance circuit, continued flow of current through the capacitor may obviously produce severe overheating. The short-circuit failure may thereby be converted to an open-circuit failure. If the circuit does not open promptly, the over-heated capacitor may damage the circuit board or nearby components. Protection against such occurrence is obtained by current-limiting devices or fuses provided by the circuit design.

Fortunately, the inherent failure rate of KEMET wet tantalum capacitors is low, and this failure rate may be further improved by circuit design. Statistical failure rates are provided for wet tantalum capacitors.

16.Reliability Prediction

The failure rate is dependent upon three important application conditions; DC voltage, ambient temperature, and circuit impedance. Additional effects are attributable to the capacitance of the device and atmospheric and mechanical exposure of the assembled circuit. The 1000 multiplier at the end converts the failure rate to parts-per-billion piece-hours. A prediction of the failure rate can be made using these application conditions and the formulas and tables listed in MIL-HDBK217F (Notice 2).

Frequency of applied ripple

current

120 Hz 800 Hz 1kHz 10 kHz 40 kHz 100 kHz

Ambient

Temp (°C) Temp (°C) Temp (°C) Temp (°C) Temp (°C) Temp (°C)

=55° 85° 105° 125° =55° 85° 105° 125° =55° 85° 105° 125° =55° 85° 105° 125° =55° 85° 105° 125° =55° 85° 105° 125°

% of +85°C Rated

Voltage

100% 0.60 0.39 -- -- 0.71 0.43 -- -- 0.72 0.45 -- -- 0.88 0.55 -- -- 1.00 0.63 -- -- 1.10 0.69 -- --

90% 0.60 0.46 -- -- 0.71 0.55 -- -- 0.72 0.55 -- -- 0.88 0.67 -- -- 1.00 0.77 -- -- 1.10 0.85 -- --

80% 0.60 0.52 0.35 -- 0.71 0.62 0.42 -- 0.72 0.62 0.42 -- 0.88 0.76 0.52 -- 1.00 0.87 0.59 -- 1.10 0.96 0.65 --

70% 0.60 0.58 0.44 -- 0.71 0.69 0.52 -- 0.72 0.70 0.52 -- 0.88 0.85 0.64 -- 1.00 0.97 0.73 -- 1.10 1.07 0.80 --

+66.67%

0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.00 1.00 0.77 0.32 1.10 1.10 0.85 0.50

Permissible AC Currents

Performance Characteristics

Base Multiplier: The first multiplier is the base multiplier (2) established for the capacitor type. For “CLR” “Tantalum Non-solid electrolyte” the base multiplier is

0.00040. Temperature: The temperature factor is given as (3). From this formula, it can be seen that the unity factor, or 1, is derived at an ambient temperature of +25°C (+298°K), and that at temperatures below this the multiplier is decreasing and at temperatures above this the multiplier is increasing. Voltage: The multiplier for application voltage (4) is a two step process: first, the application voltage is compared to 60% of rated voltage, and then this ratio is raised to an exponential power of 17 and added to unity. Consider applications of 50%, 60%, 70%, 80% and 90% of rated voltage. The multipliers for these applications would be 1.045, 2.00, 14.7, 134, and 986, respectively. From these results it is evident why manufacturers recommend application voltages not to exceed 50% rated voltages.

Cap

acitance:

There is a factor (5) applied to the capacitance (in μF) which effectively increases the failure rate for increasing capacitance (increases in effective area resulting in increases in possible faults). Environmental: The environmental factor is determined by the harshness of the ambient conditions beyond temperature. An explanation of these ratings is included in the MIL specification and are too extensive to be covered here. In most cases, this factor is set to ground benign or GB, with the resulting factor equal to “1”.

Figure 6. MIL-HDBK-217F Notice 2 formulas.

Quality Factor: All of these multipliers are applied to the

established or base failure rate of the part. The CLR Series is qualified under U.S. military specification MILPRF-39006. Failure rates as low as 0.001% kHr are available under this test program.

For series not covered by military specifications, an internal sampling program is operated by KEMET Quality Assurance whereby parts are put on life test at rated voltage for 2000 hours. The confidence level chosen for the reporting data is 60%. )The cost of sampling each batch would be prohibitive, and no claim is made to quarantee the failure rate of each batch.) With this test-

ing and each new qualification test for new parts, the average failure rate for all commercial Series lies between 0.1% and 1.0% per thousand-piece-hours.

Fit Calculator

All of these factors are gathered into a Windows based software, available free from the KEMET web site (www.kemet.com). The “FIT Calculator” software does all the calculations and look-ups based on information entered or selected by the operator. A manual may also be downloaded from the same web page to explain the controls and displays. The Manual as well as a help screen also detail the environmental conditions.

17. Environmental Consideration

It is not possible to foresee all the conditions to which capacitors may be subjected. Following is a list of standard tests which each Series will survive. Data may be available (upon request) under more severe stresses for certain Series.

• Life Test 85°C or 125°C, 2000 Hours; when subjected to 2000 hours at 85°C at full rated DC voltage, or 125°C at 2/3 of 85°C voltage, the capacitor shall meet the following requirements when tested at 25°C.

- The DCL shall be within 1.25 times the initial

DCL limit.

- Capacitance shall be within limits specified in

MIL-PRF-39006.

• Low Temperature (Storage) per MIL-PRF-

39006.

Post test of capacitor shall meet the following requirements when tested at 25°C:

- The DCL shall be within the initial DCL limit.

- Capacitance shall be within limits in MIL-PRF-

39006.

- The DF shall not exceed the initial limit.

• Lead Strength MIL-STD-202 Method 211: Pull

test will be performed as in MIL-STD-202, Method 211. The following details and excep-

tions shall apply. a. Test condition letter - A b. The body of the capacitor will be securely

clamped during test. c. Applied force - 3 pounds (1.4 kg) d. Duration of applied force: 30 seconds

• Vibration; High Frequency: Per MIL-STD-202, Method 204, Condition D, 10 Hz to 2000 Hz.

a. Mounting - Capacitors shall be mounted on a

fixture by the body. Leads shall be supported by rigidly supported terminals

b. Electrical load conditions - During the test, the

specified DC rated voltage shall be applied to the capacitors.

c. Test condition letter - H (80G). d. Duration and direction of motion - 4 hours in

each of two mutually perpendicular directions (total of 8 hours), one parallel and the other perpendicular to the axis.

e. Measurements during vibration - During the

last cycle, an electrical measurement shall be made to determine intermittent operation or open- or short-circuiting. Observations shall also be made to determine intermittent contact or arcing or open- or short-circuiting. Detecting equipment shall be sufficiently sensitive to detect any interruption with a duration of 0.5 ms, or greater.

• DC Leakage - shall not exceed 1.25 times initial limit

• Capacitance - shall not change more than ± 5% from initial limit

• DF - shall not exceed 1.15 times initial limit

f. Examination after test - Capacitors shall be

visually examined for evidence of mechanical damage.

• Shock Test: Per MIL-STD-202, Method 213.

The following details shall apply: a. Special mounting means - Capacitors shall

be rigidly mounted on a mounting fixture by the body. When securing leads, care shall be taken to avoid pinching the heads.

b. Test-condition letter - D (500 G peak). 6 ms.

(sawtooth)

c. Measurements and electrical loading during

shock - During the test, observations shall be made to determine intermittent contact or arcing or open- or short-circuiting. Detecting equipment shall be sufficiently sensitive to detect any interruption with a duration of 0.5 ms. The DC rated voltage shall be applied to the capacitors during the test.

d. Examinations after test - Capacitors shall be

visually examined for evidence of arcing, breakdown, and mechanical damage.

• Thermal Shock - MIL-STD-202, Method 107:

Capacitors shall be subjected to thermal shock in accordance with MIL-STD-202, Method 107, Test Condition A except step 3 shall be +125°C. Measurements before and after cycling are required. Conditioning prior to the first cycle will be 15 minutes at the following standard inspection conditions: a. Number of Cycles: 300 for qualification and

Group C b. Ambient Temperature – 25°C ±5°C c. Final measurements are made after stabi-

lization at room temperature

• Moisture Resistance - MIL-STD-202, Method

106: Capacitors shall be tested in accordance

with MIL-STD-202, Method 106 including the following details: a. Mounting - The capacitors shall be mounted

by normal mounting means b. Initial Measurements c. Polarizing and Load Voltage - 6 vdc d. Final measurements - After the final cycle

and within 2 to 6 hours after removal of the

capacitors from the humidity chamber, capa-

citance, dissipation factor, and DC leakage

will be measured per MIL-PRF-39006.

• Resistance to Solvents - MIL-STD-202, Method 215:

a. Brushing required after test b. DCL meets limit shown in respective Part

Number Tables c. Capacitance meets applicable tolerance d. DF meets limits shown in respective Part

Number Tables e. No visible damage to case or marking

• Resistance to Soldering Heat - MIL-STD202, Method 210, Test Condition, Letter C.

Leads shall be immersed to within 0.05 inch of the capacitor body. Capacitance, DF, and DCL should meet original limits shown in respective Part Number Tables.

• Solderability - MIL-STD, Method 208:

a. Number of terminations on each capacitor

tested: 2

b. Depth of insertion in flux and solder to with-

in 0.062” of welded joint

• Stability at Low and High Temperature

-55°C to 125°C: Capacitors will be capable of

withstanding extreme temperature testing at a succession of continuous steps at +25°C, -55°C, +25°C, +85°C, +125°C, +25°C, in the order stated. Capacitors shall be brought to thermal stability at each test temperature. Capacitance, DF, and DCL are measured at each test temperature except that DCL is not measured at -55°C, DC bias of 2.0 ±0.5 vdc is recommended for the capacitance and DF measurements. When measurements are made at the various steps, the electrical limits for each temperature shall not exceed the following limits.

Step 1, +25°C DCL as indicated in original

limit; capacitance within tolerance specified; DF as indicated in original limit shown in Part Number Tables.

Step 2, -55°C Impedance and capacitance

change as defined in M39006 Slash Sheet.

Performance Characteristics

Step 3, +25°C DCL as indicated in original

limit; capacitance within ±5% of initial value; ESR, DF within limit ±5% of inital value; ESR, DF within limit shown in Part Number Tables.

Step 4, +85°C DCL shall not exceed 10 times

original DCL limit at 25°C. Capacitance shall be within ±10% of the initial value. DF shall be within 125% of limits shown in Part Number Tables. ESR shall be within limits shown in Part Number Tables.

Step 5, +125°C DCL shall not exceed 12.5

times the original limit at 25°C. Capacitance shall be within ±12% of initial value. DF shall be within 150% of limits shown in Part Number Tables. ESR shall be within limits shown in Part Number Tables.

Step 6, +25°C DCL as indicated in original

limit; capacitance within ±5% of initial value; ESR, DF as indicated in original limit shown in

Part Number Tables. Note: MIL-PRF-39006 specifies Δ’s and limits by individual slash sheet.

• AC Ripple Life at 85°C: Per MIL-STD-202, Method 108:

The following details shall apply: a. Distance of temperature measurements

from specimens : Not applicable

b. Method of mounting: Normal means c. Test condition letter: F (2000 hours, +72 hrs, -

Ohm)

d. DC Leakage, DF shall not exceed initial limit

• Seal Condition: Per MIL-STD-202, Method 112

Conditions A or D, and C

18. High Temperature Capacitors - T197 and T198 Series

The voltage derating for these capacitors begins at

+85°C, as with all other tantalum capacitors. There will be a linear derating between 100% at +85°C and 2/3 (67%) at +125°C. For the 200°C rated parts, the voltage rating shall be 50%.

For reverse voltage rating, the 3 VDC shall apply to

all temperatures up to +85°C. From +85°C to +125°C, the reverse voltage rating shall be 2 VDC. From +125°C to +200°C, the reverse voltage rating shall be

1.0 VDC.

19.Mounting

Wet tantalum capacitors will pass the Resistance to

Soldering Heat Test of MIL-STD-202, Method 210, Condition C. This test simulates wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. More severe treatment must be considered reflective of an improper soldering process.

Shown in Figure 7 is a recommended solder wave

profile for wet tantalum capacitors

Figure 7. Optimum Solder Wave Profile

• Operating Temperature -55°C – +125°C • Qualified to Mil-C-39006/22/25/30/31

• Operating Temperature -55°C – +200°C, Style CLR79, CLR81, CLR90, CLR91 derated voltage, T197/T198 Series Only • Capacitance Tolerance - ±5%, ±10%, ±20%

• 6 – 125 Volts • Low ESR

• Capacitance Range – 1.7μF - 2200.0 μF • Tantalum Case

• High Shock, High Vibration Qualified

Dimensions - Inches (Millimeters)

Outline Drawing

Features

• Filtering, Bypass Circuits • Low Source Impedance Circuits

• Coupling and Timing Circuits • High Charging Current Circuits

Applications

MIL-PRF- Uninsulated Case Uninsulated Case Insulated Case

KEMET 39006/22/ L* D D E

Case 25/30/31 +0.031(0.79) ±0.016(0.41) Max. ±0.25(6.35)

Size Case Size -0.016(0.41)

A T1 0.453(11.51) 0.188(4.78) 0.219(5.56) 1.50(38.10) B T2 0.641(16.28) 0.281(7.14) 0.312(7.92) 2.25(57.15) C T3 0.766(19.46) 0.375(9.52) 0.406(10.31) 2.25(57.15) D T4 1.062(26.97) 0.375(9.52) 0.406(10.31) 2.25(57.15)

* Length of base case sleeving shall be specified in MIL-PRF-39006.

Wet Tantalum General Information

Ordering Information

Mil-PRF-39006

Component Marking

Case Size

KEMET EIA Pieces per Tray

AT1 20 BT2 20 CT3 20 DT4 20

Packaging

T19X Commercial

Component Marking

* 1st & 2nd digit = Year;

3rd & 4th digit = Week

Case Size

Average Weight

KEMET EIA (grams)

A T1 2.0 B T2 5.1 C T3 8.1 D T4 14.3

Component Weight

Construction

* 1st & 2nd digit = Year

3rd & 4th digit = Week

K T192 +

6R8 μF

10% 75V+

0602AA

Manufacturer’s Identification, Series, Polarity

Nominal Capacitance in Microfarads (μF) (“R” Indicates a Decimal)

Capacitance Tolerance, Voltage Polarity

Date*/Lot Code

M39006/ + 22-0061 JAN K + 31433 0605AA + 15μF 15V

Military Specification, Polarity

Specification Sheet Number

JAN Marking, Trademark, Polarity

CAGE Code

Date*/Lot Code, Polarity

Capacitance, Voltage

192 A 256 M 008 A S C

TANTALUM

SERIES

T190/T290 MIL-PRF-39006/30 (CLR90) T191/T291 MIL-PRF-39006/31 (CLR91) T192/T292 MIL-PRF-39006/22 (CLR79) T195/T295 MIL-PRF-39006/25 (CLR81) T197 & T198 High Temperature

CASE SIZE

A,B,C,D

CAPACITANCE PICOFARAD CODE

First two digits represent significant figures. Third digit specifies number of zeros.

CAPACITANCE TOLERANCE

M = ±20%, K = ±10%

VOLTAGE

As Shown

FAILURE RATE

A = Not Applicable

LEAD MATERIAL

S - Standard Solder Coated Nickel

(Sn/Pb content)

*Refer to www.kemet.com for lead material transition to Pb free.

SPECIFICATION

(when necessary)

C-0100 (Uninsulated Components)

C-0200 (High Shock, High Vibration)

T190/T290 (CLR90) Ratings & Part Number Reference

(1) To complete the KEMET part number, insert Failure Rate Level: M = (1.0); P = (0.1); and R = (.01) (#) Dash number shall include letter “H” to indicate high vibration and shock requirements (i.e. 80g vibration and 500g shock)

Max. ESR Max. Ripple MIL-PRF-39006/30A (CLR90)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

6 Volt Rating at +85°C (4 Volt Rating at +125°C)

30.0 A 20 T190A306M006AS 1.0 4.50 1.99 820 0001 0221 0441 T290A306M006(1)S

30.0 A 10 T190A306K006AS 1.0 4.50 1.99 820 0002 0222 0442 T290A306K006(1)S

30.0 A 5 T190A306J006AS 1.0 4.50 1.99 820 0003 0223 0443 T290A306J006(1)S

68.0 A 20 T190A686M006AS 1.0 7.50 1.58 960 0004 0224 0444 T290A686M006(1)S

68.0 A 10 T190A686K006AS 1.0 7.50 1.58 960 0005 0225 0445 T290A686K006(1)S

68.0 A 5 T190A686J006AS 1.0 7.50 1.58 960 0006 0226 0446 T290A686J006(1)S

140.0 B 20 T190B147M006AS 1.0 10.50 0.99 1200 0007 0227 0447 T290B147M006(1)S

140.0 B 10 T190B147K006AS 1.0 10.50 0.99 1200 0008 0228 0448 T290B147K006(1)S

140.0 B 5 T190B147J006AS 1.0 10.50 0.99 1200 0009 0229 0449 T290B147J006(1)S

270.0 B 20 T190B277M006AS 1.0 22.50 1.11 1375 0010 0230 0450 T290B277M006(1)S

270.0 B 10 T190B277K006AS 1.0 22.50 1.11 1375 0011 0231 0451 T290B277K006(1)S

270.0 B 5 T190B277J006AS 1.0 22.50 1.11 1375 0012 0232 0452 T290B277J006(1)S

330.0 C 20 T190C337M006AS 2.0 18.00 0.73 1800 0013 0233 0453 T290C337M006(1)S

330.0 C 10 T190C337K006AS 2.0 18.00 0.73 1800 0014 0234 0454 T290C337K006(1)S

330.0 C 5 T190C337J006AS 2.0 18.00 0.73 1800 0015 0235 0455 T290C337J006(1)S

560.0 C 20 T190C567M006AS 2.0 27.50 0.65 1900 0016 0236 0456 T290C567M006(1)S

560.0 C 10 T190C567K006AS 2.0 27.50 0.65 1900 0017 0237 0457 T290C567K006(1)S

560.0 C 5 T190C567J006AS 2.0 27.50 0.65 1900 0018 0238 0458 T290C567J006(1)S

1200.0 D 20 T190D128M006AS 3.0 45.00 0.50 2265 0019 0239 0459 T290D128M006(1)S

1200.0 D 10 T190D128K006AS 3.0 45.00 0.50 2265 0020 0240 0460 T290D128K006(1)S 8 Volt Rating at +85°C (5 Volt Rating at +125°C)

25.0 A 20 T190A256M008AS 1.0 3.75 1.99 820 0021 0241 0461 T290A256M008(1)S

25.0 A 10 T190A256K008AS 1.0 3.75 1.99 820 0022 0242 0462 T290A256K008(1)S

25.0 A 5 T190A256J008AS 1.0 3.75 1.99 820 0023 0243 0463 T290A256J008(1)S

56.0 A 20 T190A566M008AS 1.0 7.00 1.66 900 0024 0244 0464 T290A566M008(1)S

56.0 A 10 T190A566K008AS 1.0 7.00 1.66 900 0025 0245 0465 T290A566K008(1)S

56.0 A 5 T190A566J008AS 1.0 7.00 1.66 900 0026 0246 0466 T290A566J008(1)S

120.0 B 20 T190B127M008AS 1.0 10.00 1.11 1220 0027 0247 0467 T290B127M008(1)S

120.0 B 10 T190B127K008AS 1.0 10.00 1.11 1220 0028 0248 0468 T290B127K008(1)S

120.0 B 5 T190B127J008AS 1.0 10.00 1.11 1220 0029 0249 0469 T290B127J008(1)S

220.0 B 20 T190B227M008AS 1.0 18.50 1.12 1370 0030 0250 0470 T290B227M008(1)S

220.0 B 10 T190B227K008AS 1.0 18.50 1.12 1370 0031 0251 0471 T290B227K008(1)S

220.0 B 5 T190B227J008AS 1.0 18.50 1.12 1370 0032 0252 0472 T290B227J008(1)S

290.0 C 20 T190C297M008AS 2.0 17.00 0.78 1770 0033 0253 0473 T290C297M008(1)S

290.0 C 10 T190C297K008AS 2.0 17.00 0.78 1770 0034 0254 0474 T290C297K008(1)S

290.0 C 5 T190C297J008AS 2.0 17.00 0.78 1770 0035 0255 0475 T290C297J008(1)S

430.0 C 20 T190C437M008AS 2.0 23.00 0.71 1825 0036 0256 0476 T290C437M008(1)S

430.0 C 10 T190C437K008AS 2.0 23.00 0.71 1825 0037 0257 0477 T290C437K008(1)S

430.0 C 5 T190C437J008AS 2.0 23.00 0.71 1825 0038 0258 0478 T290C437J008(1)S

850.0 D 20 T190D857M008AS 4.0 30.00 0.47 2330 0039 0259 0479 T290D857M008(1)S

850.0 D 10 T190D857K008AS 4.0 30.00 0.47 2330 0040 0260 0480 T290D857K008(1)S 10 Volt Rating at +85°C (7 Volt Rating at +125°C)

20.0 A 20 T190A206M010AS 1.0 3.00 1.99 820 0041 0261 0481 T290A206M010(1)S

20.0 A 10 T190A206K010AS 1.0 3.00 1.99 820 0042 0262 0482 T290A206K010(1)S

20.0 A 5 T190A206J010AS 1.0 3.00 1.99 820 0043 0263 0483 T290A206J010(1)S

47.0 A 20 T190A476M010AS 1.0 6.50 1.84 855 0044 0264 0484 T290A476M010(1)S

47.0 A 10 T190A476K010AS 1.0 6.50 1.84 855 0045 0265 0485 T290A476K010(1)S

47.0 A 5 T190A476J010AS 1.0 6.50 1.84 855 0046 0266 0486 T290A476J010(1)S

100.0 B 20 T190B107M010AS 1.0 7.50 0.99 1200 0047 0267 0487 T290B107M010(1)S

100.0 B 10 T190B107K010AS 1.0 7.50 0.99 1200 0048 0268 0488 T290B107K010(1)S

100.0 B 5 T190B107J010AS 1.0 7.50 0.99 1200 0049 0269 0489 T290B107J010(1)S

180.0 B 20 T190B187M010AS 1.0 15.00 1.11 1365 0050 0270 0490 T290B187M010(1)S

180.0 B 10 T190B187K010AS 1.0 15.00 1.11 1365 0051 0271 0491 T290B187K010(1)S

180.0 B 5 T190B187J010AS 1.0 15.00 1.11 1365 0052 0272 0492 T290B187J010(1)S

250.0 C 20 T190C257M010AS 2.0 15.00 0.80 1720 0053 0273 0493 T290C257M010(1)S

250.0 C 10 T190C257K010AS 2.0 15.00 0.80 1720 0054 0274 0494 T290C257K010(1)S

250.0 C 5 T190C257J010AS 2.0 15.00 0.80 1720 0055 0275 0495 T290C257J010(1)S

390.0 C 20 T190C397M010AS 2.0 22.00 0.75 1800 0056 0276 0496 T290C397M010(1)S

390.0 C 10 T190C397K010AS 2.0 22.00 0.75 1800 0057 0277 0497 T290C397K010(1)S

390.0 C 5 T190C397J010AS 2.0 22.00 0.75 1800 0058 0278 0498 T290C397J010(1)S

750.0 D 20 T190D757M010AS 4.0 25.00 0.44 2360 0059 0279 0499 T290D757M010(1)S

750.0 D 10 T190D757K010AS 4.0 25.00 0.44 2360 0060 0280 0500 T290D757K010(1)S

Wet Tantalum T190/T290 Series

T190/T290 (CLR90) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/30A (CLR90)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

15 Volt Rating at +85°C (10 Volt Rating at +125°C)

15.0 A 20 T190A156M015AS 1.0 2.50 2.21 780 0061 0281 0501 T290A156M015(1)S

15.0 A 10 T190A156K015AS 1.0 2.50 2.21 780 0062 0282 0502 T290A156K015(1)S

15.0 A 5 T190A156J015AS 1.0 2.50 2.21 780 0063 0283 0503 T290A156J015(1)S

33.0 A 20 T190A336M015AS 1.0 5.00 2.01 820 0064 0284 0504 T290A336M015(1)S

33.0 A 10 T190A336K015AS 1.0 5.00 2.01 820 0065 0285 0505 T290A336K015(1)S

33.0 A 5 T190A336J015AS 1.0 5.00 2.01 820 0066 0286 0506 T290A336J015(1)S

70.0 B 20 T190B706M015AS 1.0 6.50 1.23 1150 0067 0287 0507 T290B706M015(1)S

70.0 B 10 T190B706K015AS 1.0 6.50 1.23 1150 0068 0288 0508 T290B706K015(1)S

70.0 B 5 T190B706J015AS 1.0 6.50 1.23 1150 0069 0289 0509 T290B706J015(1)S

120.0 B 20 T190B127M015AS 1.0 9.00 0.99 1450 0070 0290 0510 T290B127M015(1)S

120.0 B 10 T190B127K015AS 1.0 9.00 0.99 1450 0071 0291 0511 T290B127K015(1)S

120.0 B 5 T190B127J015AS 1.0 9.00 0.99 1450 0072 0292 0512 T290B127J015(1)S

170.0 C 20 T190C177M015AS 2.0 12.50 0.98 1480 0073 0293 0513 T290C177M015(1)S

170.0 C 10 T190C177K015AS 2.0 12.50 0.98 1480 0074 0294 0514 T290C177K015(1)S

170.0 C 5 T190C177J015AS 2.0 12.50 0.98 1480 0075 0295 0515 T290C177J015(1)S

270.0 C 20 T190C277M015AS 2.0 16.00 0.79 1740 0076 0296 0516 T290C277M015(1)S

270.0 C 10 T190C277K015AS 2.0 16.00 0.79 1740 0077 0297 0517 T290C277K015(1)S

270.0 C 5 T190C277J015AS 2.0 16.00 0.79 1740 0078 0298 0518 T290C277J015(1)S

540.0 D 20 T190D547M015AS 6.0 20.00 0.49 2330 0079 0299 0519 T290D547M015(1)S

540.0 D 10 T190D547K015AS 6.0 20.00 0.49 2330 0080 0300 0520 T290D547K015(1)S 25 Volt Rating at +85°C (15 Volt Rating at +125°C)

10.0 A 20 T190A106M025AS 1.0 2.00 2.66 715 0081 0301 0521 T290A106M025(1)S

10.0 A 10 T190A106K025AS 1.0 2.00 2.66 715 0082 0302 0522 T290A106K025(1)S

10.0 A 5 T190A106J025AS 1.0 2.00 2.66 715 0083 0303 0523 T290A106J025(1)S

22.0 A 20 T190A226M025AS 1.0 3.30 1.99 825 0084 0304 0524 T290A226M025(1)S

22.0 A 10 T190A226K025AS 1.0 3.30 1.99 825 0085 0305 0525 T290A226K025(1)S

22.0 A 5 T190A226J025AS 1.0 3.30 1.99 825 0086 0306 0526 T290A226J025(1)S

50.0 B 20 T190B506M025AS 1.0 5.50 1.46 1130 0087 0307 0527 T290B506M025(1)S

50.0 B 10 T190B506K025AS 1.0 5.50 1.46 1130 0088 0308 0528 T290B506K025(1)S

50.0 B 5 T190B506J025AS 1.0 5.50 1.46 1130 0089 0309 0529 T290B506J025(1)S

100.0 B 20 T190B107M025AS 1.0 7.50 0.99 1435 0090 0310 0530 T290B107M025(1)S

100.0 B 10 T190B107K025AS 1.0 7.50 0.99 1435 0091 0311 0531 T290B107K025(1)S

100.0 B 5 T190B107J025AS 1.0 7.50 0.99 1435 0092 0312 0532 T290B107J025(1)S

120.0 C 20 T190C127M025AS 2.0 10.50 1.16 1450 0093 0313 0533 T290C127M025(1)S

120.0 C 10 T190C127K025AS 2.0 10.50 1.16 1450 0094 0314 0534 T290C127K025(1)S

120.0 C 5 T190C127J025AS 2.0 10.50 1.16 1450 0095 0315 0535 T290C127J025(1)S

180.0 C 20 T190C187M025AS 2.0 13.00 0.96 1525 0096 0316 0536 T290C187M025(1)S

180.0 C 10 T190C187K025AS 2.0 13.00 0.96 1525 0097 0317 0537 T290C187K025(1)S

180.0 C 5 T190C187J025AS 2.0 13.00 0.96 1525 0098 0318 0538 T290C187J025(1)S

350.0 D 20 T190D357M025AS 7.0 17.50 0.67 1970 0099 0319 0539 T290D357M025(1)S

350.0 D 10 T190D357K025AS 7.0 17.50 0.67 1970 0100 0320 0540 T290D357K025(1)S 30 Volt Rating at +85°C (20 Volt Rating at +125°C)

8.0 A 20 T190A805M030AS 1.0 2.00 3.32 640 0101 0321 0541 T290A805M030(1)S

8.0 A 10 T190A805K030AS 1.0 2.00 3.32 640 0102 0322 0542 T290A805K030(1)S

8.0 A 5 T190A805J030AS 1.0 2.00 3.32 640 0103 0323 0543 T290A805J030(1)S

15.0 A 20 T190A156M030AS 1.0 2.50 2.21 780 0104 0324 0544 T290A156M030(1)S

15.0 A 10 T190A156K030AS 1.0 2.50 2.21 780 0105 0325 0545 T290A156K030(1)S

15.0 A 5 T190A156J030AS 1.0 2.50 2.21 780 0106 0326 0546 T290A156J030(1)S

40.0 B 20 T190B406M030AS 1.0 5.00 1.66 1120 0107 0327 0547 T290B406M030(1)S

40.0 B 10 T190B406K030AS 1.0 5.00 1.66 1120 0108 0328 0548 T290B406K030(1)S

40.0 B 5 T190B406J030AS 1.0 5.00 1.66 1120 0109 0329 0549 T290B406J030(1)S

68.0 B 20 T190B686M030AS 1.0 6.50 1.27 1285 0110 0330 0550 T290B686M030(1)S

68.0 B 10 T190B686K030AS 1.0 6.50 1.27 1285 0111 0331 0551 T290B686K030(1)S

68.0 B 5 T190B686J030AS 1.0 6.50 1.27 1285 0112 0332 0552 T290B686J030(1)S

100.0 C 20 T190C107M030AS 2.0 8.50 1.13 1450 0113 0333 0553 T290C107M030(1)S

100.0 C 10 T190C107K030AS 2.0 8.50 1.13 1450 0114 0334 0554 T290C107K030(1)S

100.0 C 5 T190C107J030AS 2.0 8.50 1.13 1450 0115 0335 0555 T290C107J030(1)S

150.0 C 20 T190C157M030AS 2.0 11.50 1.02 1525 0116 0336 0556 T290C157M030(1)S

150.0 C 10 T190C157K030AS 2.0 11.50 1.02 1525 0117 0337 0557 T290C157K030(1)S

150.0 C 5 T190C157J030AS 2.0 11.50 1.02 1525 0118 0338 0558 T290C157J030(1)S

300.0 D 20 T190D307M030AS 8.0 15.50 0.69 1950 0119 0339 0559 T290D307M030(1)S

300.0 D 10 T190D307K030AS 8.0 15.50 0.69 1950 0120 0340 0560 T290D307K030(1)S

T190/T290 (CLR90) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/30A (CLR90)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

50 Volt Rating at +85°C (30 Volt Rating at +125°C)

5.0 A 20 T190A505M050AS 1.0 1.50 3.98 580 0121 0341 0561 T290A505M050(1)S

5.0 A 10 T190A505K050AS 1.0 1.50 3.98 580 0122 0342 0562 T290A505K050(1)S

5.0 A 5 T190A505J050AS 1.0 1.50 3.98 580 0123 0343 0563 T290A505J050(1)S

10.0 A 20 T190A106M050AS 1.0 2.00 2.66 715 0124 0344 0564 T290A106M050(1)S

10.0 A 10 T190A106K050AS 1.0 2.00 2.66 715 0125 0345 0565 T290A106K050(1)S

10.0 A 5 T190A106J050AS 1.0 2.00 2.66 715 0126 0346 0566 T290A106J050(1)S

25.0 B 20 T190B256M050AS 1.0 4.00 2.13 1005 0127 0347 0567 T290B256M050(1)S

25.0 B 10 T190B256K050AS 1.0 4.00 2.13 1005 0128 0348 0568 T290B256K050(1)S

25.0 B 5 T190B256J050AS 1.0 4.00 2.13 1005 0129 0349 0569 T290B256J050(1)S

47.0 B 20 T190B476M050AS 1.0 5.50 1.56 1155 0130 0350 0570 T290B476M050(1)S

47.0 B 10 T190B476K050AS 1.0 5.50 1.56 1155 0131 0351 0571 T290B476K050(1)S

47.0 B 5 T190B476J050AS 1.0 5.50 1.56 1155 0132 0352 0572 T290B476J050(1)S

60.0 C 20 T190C606M050AS 2.0 6.00 1.33 1335 0133 0353 0573 T290C606M050(1)S

60.0 C 10 T190C606K050AS 2.0 6.00 1.33 1335 0134 0354 0574 T290C606K050(1)S

60.0 C 5 T190C606J050AS 2.0 6.00 1.33 1335 0135 0355 0575 T290C606J050(1)S

82.0 C 20 T190C826M050AS 2.0 7.50 1.22 1400 0136 0356 0576 T290C826M050(1)S

82.0 C 10 T190C826K050AS 2.0 7.50 1.22 1400 0137 0357 0577 T290C826K050(1)S

82.0 C 5 T190C826J050AS 2.0 7.50 1.22 1400 0138 0358 0578 T290C826J050(1)S

160.0 D 20 T190D167M050AS 8.0 8.50 0.71 1900 0139 0359 0579 T290D167M050(1)S

160.0 D 10 T190D167K050AS 8.0 8.50 0.71 1900 0140 0360 0580 T290D167K050(1)S

60 Volt Rating at +85°C (40 Volt Rating at +125°C)

4.0 A 20 T190A405M060AS 1.0 1.40 4.65 525 0141 0361 0581 T290A405M060(1)S

4.0 A 10 T190A405K060AS 1.0 1.40 4.65 525 0142 0362 0582 T290A405K060(1)S

4.0 A 5 T190A405J060AS 1.0 1.40 4.65 525 0143 0363 0583 T290A405J060(1)S

8.2 A 20 T190A825M060AS 1.0 2.00 3.24 625 0144 0364 0584 T290A825M060(1)S

8.2 A 10 T190A825K060AS 1.0 2.00 3.24 625 0145 0365 0585 T290A825K060(1)S

8.2 A 5 T190A825J060AS 1.0 2.00 3.24 625 0146 0366 0586 T290A825J060(1)S

20.0 B 20 T190B206M060AS 1.0 3.50 2.32 930 0147 0367 0587 T290B206M060(1)S

20.0 B 10 T190B206K060AS 1.0 3.50 2.32 930 0148 0368 0588 T290B206K060(1)S

20.0 B 5 T190B206J060AS 1.0 3.50 2.32 930 0149 0369 0589 T290B206J060(1)S

39.0 B 20 T190B396M060AS 1.0 5.00 1.70 1110 0150 0370 0590 T290B396M060(1)S

39.0 B 10 T190B396K060AS 1.0 5.00 1.70 1110 0151 0371 0591 T290B396K060(1)S

39.0 B 5 T190B396J060AS 1.0 5.00 1.70 1110 0152 0372 0592 T290B396J060(1)S

50.0 C 20 T190C506M060AS 2.0 5.00 1.33 1330 0153 0373 0593 T290C506M060(1)S

50.0 C 10 T190C506K060AS 2.0 5.00 1.33 1330 0154 0374 0594 T290C506K060(1)S

50.0 C 5 T190C506J060AS 2.0 5.00 1.33 1330 0155 0375 0595 T290C506J060(1)S

68.0 C 20 T190C686M060AS 2.0 6.50 1.27 1365 0156 0376 0596 T290C686M060(1)S

68.0 C 10 T190C686K060AS 2.0 6.50 1.27 1365 0157 0377 0597 T290C686K060(1)S

68.0 C 5 T190C686J060AS 2.0 6.50 1.27 1365 0158 0378 0598 T290C686J060(1)S

140.0 D 20 T190D147M060AS 8.0 8.00 0.76 1850 0159 0379 0599 T290D147M060(1)S

140.0 D 10 T190D147K060AS 8.0 8.00 0.76 1850 0160 0380 0600 T290D147K060(1)S

75 Volt Rating at +85°C (50 Volt Rating at +125°C)

3.5 A 20 T190A355M075AS 1.0 1.25 4.74 525 0161 0381 0601 T290A355M075(1)S

3.5 A 10 T190A355K075AS 1.0 1.25 4.74 525 0162 0382 0602 T290A355K075(1)S

3.5 A 5 T190A355J075AS 1.0 1.25 4.74 525 0163 0383 0603 T290A355J075(1)S

6.8 A 20 T190A685M075AS 1.0 1.75 3.42 610 0164 0384 0604 T290A685M075(1)S

6.8 A 10 T190A685K075AS 1.0 1.75 3.42 610 0165 0385 0605 T290A685K075(1)S

6.8 A 5 T190A685J075AS 1.0 1.75 3.42 610 0166 0386 0606 T290A685J075(1)S

15.0 B 20 T190B156M075AS 1.0 3.00 2.66 890 0167 0387 0607 T290B156M075(1)S

15.0 B 10 T190B156K075AS 1.0 3.00 2.66 890 0168 0388 0608 T290B156K075(1)S

15.0 B 5 T190B156J075AS 1.0 3.00 2.66 890 0169 0389 0609 T290B156J075(1)S

33.0 B 20 T190B336M075AS 1.0 5.00 2.01 1000 0170 0390 0610 T290B336M075(1)S

33.0 B 10 T190B336K075AS 1.0 5.00 2.01 1000 0171 0391 0611 T290B336K075(1)S

33.0 B 5 T190B336J075AS 1.0 5.00 2.01 1000 0172 0392 0612 T290B336J075(1)S

40.0 C 20 T190C406M075AS 2.0 4.50 1.50 1250 0173 0393 0613 T290C406M075(1)S

40.0 C 10 T190C406K075AS 2.0 4.50 1.50 1250 0174 0394 0614 T290C406K075(1)S

40.0 C 5 T190C406J075AS 2.0 4.50 1.50 1250 0175 0395 0615 T290C406J075(1)S

56.0 C 20 T190C566M075AS 2.0 5.50 1.31 1335 0176 0396 0616 T290C566M075(1)S

56.0 C 10 T190C566K075AS 2.0 5.50 1.31 1335 0177 0397 0617 T290C566K075(1)S

56.0 C 5 T190C566J075AS 2.0 5.50 1.31 1335 0178 0398 0618 T290C566J075(1)S

110.0 D 20 T190D117M075AS 9.0 6.00 0.73 1850 0179 0399 0619 T290D117M075(1)S

110.0 D 10 T190D117K075AS 9.0 6.00 0.73 1850 0180 0400 0620 T290D117K075(1)S

Wet Tantalum T190/T290 Series

T190/T290 (CLR90) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/30A (CLR90)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

100 Volt Rating at +85°C (65 Volt Rating at +125°C)

2.5 A 20 T190A255M100AS 1.0 1.00 5.31 505 0181 0401 0621 T290A255M100(1)S

2.5 A 10 T190A255K100AS 1.0 1.00 5.31 505 0182 0402 0622 T290A255K100(1)S

2.5 A 5 T190A255J100AS 1.0 1.00 5.31 505 0183 0403 0623 T290A255J100(1)S

4.7 A 20 T190A475M100AS 1.0 1.50 4.24 565 0184 0404 0624 T290A475M100(1)S

4.7 A 10 T190A475K100AS 1.0 1.50 4.24 565 0185 0405 0625 T290A475K100(1)S

4.7 A 5 T190A475J100AS 1.0 1.50 4.24 565 0186 0406 0626 T290A475J100(1)S

11.0 B 20 T190B116M100AS 1.0 2.50 3.02 835 0187 0407 0627 T290B116M100(1)S

11.0 B 10 T190B116K100AS 1.0 2.50 3.02 835 0188 0408 0628 T290B116K100(1)S

11.0 B 5 T190B116J100AS 1.0 2.50 3.02 835 0189 0409 0629 T290B116J100(1)S

22.0 B 20 T190B226M100AS 1.0 3.75 2.26 965 0190 0410 0630 T290B226M100(1)S

22.0 B 10 T190B226K100AS 1.0 3.75 2.26 965 0191 0411 0631 T290B226K100(1)S

22.0 B 5 T190B226J100AS 1.0 3.75 2.26 965 0192 0412 0632 T290B226J100(1)S

30.0 C 20 T190C306M100AS 2.0 3.50 1.55 1240 0193 0413 0633 T290C306M100(1)S

30.0 C 10 T190C306K100AS 2.0 3.50 1.55 1240 0194 0414 0634 T290C306K100(1)S

30.0 C 5 T190C306J100AS 2.0 3.50 1.55 1240 0195 0415 0635 T290C306J100(1)S

43.0 C 20 T190C436M100AS 2.0 4.25 1.31 1335 0196 0416 0636 T290C436M100(1)S

43.0 C 10 T190C436K100AS 2.0 4.25 1.31 1335 0197 0417 0637 T290C436K100(1)S

43.0 C 5 T190C436J100AS 2.0 4.25 1.31 1335 0198 0418 0638 T290C436J100(1)S

86.0 D 20 T190D866M100AS 9.0 5.00 0.77 1800 0199 0419 0639 T290D866M100(1)S

86.0 D 10 T190D866K100AS 9.0 5.00 0.77 1800 0200 0420 0640 T290D866K100(1)S 125 Volt Rating at +85°C (85 Volt Rating at +125°C)

1.7 A 20 T190A175M125AS 1.0 1.00 7.81 415 0201 0421 0641 T290A175M125(1)S

1.7 A 10 T190A175K125AS 1.0 1.00 7.81 415 0202 0422 0642 T290A175K125(1)S

1.7 A 5 T190A175J125AS 1.0 1.00 7.81 415 0203 0423 0643 T290A175J125(1)S

3.6 A 20 T190A365M125AS 1.0 1.35 4.98 520 0204 0424 0644 T290A365M125(1)S

3.6 A 10 T190A365K125AS 1.0 1.35 4.98 520 0205 0425 0645 T290A365K125(1)S

3.6 A 5 T190A365J125AS 1.0 1.35 4.98 520 0206 0426 0646 T290A365J125(1)S

9.0 B 20 T190B905M125AS 1.0 2.50 3.69 755 0207 0427 0647 T290B905M125(1)S

9.0 B 10 T190B905K125AS 1.0 2.50 3.69 755 0208 0428 0648 T290B905K125(1)S

9.0 B 5 T190B905J125AS 1.0 2.50 3.69 755 0209 0429 0649 T290B905J125(1)S

14.0 B 20 T190B146M125AS 1.0 3.00 2.85 860 0210 0430 0650 T290B146M125(1)S

14.0 B 10 T190B146K125AS 1.0 3.00 2.85 860 0211 0431 0651 T290B146K125(1)S

14.0 B 5 T190B146J125AS 1.0 3.00 2.85 860 0212 0432 0652 T290B146J125(1)S

18.0 C 20 T190C186M125AS 2.0 2.50 1.85 1130 0213 0433 0653 T290C186M125(1)S

18.0 C 10 T190C186K125AS 2.0 2.50 1.85 1130 0214 0434 0654 T290C186K125(1)S

18.0 C 5 T190C186J125AS 2.0 2.50 1.85 1130 0215 0435 0655 T290C186J125(1)S

25.0 C 20 T190C256M125AS 2.0 3.00 1.59 1200 0216 0436 0656 T290C256M125(1)S

25.0 C 10 T190C256K125AS 2.0 3.00 1.59 1200 0217 0437 0657 T290C256K125(1)S

25.0 C 5 T190C256J125AS 2.0 3.00 1.59 1200 0218 0438 0658 T290C256J125(1)S

56.0 D 20 T190D566M125AS 10.0 3.25 0.77 1800 0219 0439 0659 T290D566M125(1)S

56.0 D 10 T190D566K125AS 10.0 3.25 0.77 1800 0220 0440 0660 T290D566K125(1)S

T191/T291 (CLR91) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/31A (CLR91)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

6 Volt Rating at +85°C (4 Volt Rating at +125°C)

220.0 A 20 T191A227M006AS 2.0 25.00 1.51 1000 0001 0089 0177 T291A227M006(1)S

220.0 A 10 T191A227K006AS 2.0 25.00 1.51 1000 0002 0090 0178 T291A227K006(1)S

820.0 B 20 T191B827M006AS 3.0 77.50 1.26 1500 0003 0091 0179 T291B827M006(1)S

820.0 B 10 T191B827K006AS 3.0 77.50 1.26 1500 0004 0092 0180 T291B827K006(1)S

1500.0 C 20 T191C158M006AS 5.0 86.00 0.76 1900 0005 0093 0181 T291C158M006(1)S

1500.0 C 10 T191C158K006AS 5.0 86.00 0.76 1900 0006 0094 0182 T291C158K006(1)S

2200.0 D 20 T191D228M006AS 6.0 85.00 0.52 2300 0007 0095 0183 T291D228M006(1)S

2200.0 D 10 T191D228K006AS 6.0 85.00 0.52 2300 0008 0096 0184 T291D228K006(1)S 8 Volt Rating at +85°C (5 Volt Rating at +125°C)

180.0 A 20 T191A187M008AS 2.0 20.50 1.51 1000 0009 0097 0185 T291A187M008(1)S

180.0 A 10 T191A187K008AS 2.0 20.50 1.51 1000 0010 0098 0186 T291A187K008(1)S

680.0 B 20 T191B687M008AS 3.0 65.00 1.27 1500 0011 0099 0187 T291B687M008(1)S

680.0 B 10 T191B687K008AS 3.0 65.00 1.27 1500 0012 0100 0188 T291B687K008(1)S

1500.0 C 20 T191C158M008AS 5.0 85.00 0.75 1900 0013 0101 0189 T291C158M008(1)S

1500.0 C 10 T191C158K008AS 5.0 85.00 0.75 1900 0014 0102 0190 T291C158K008(1)S

1800.0 D 20 T191D188M008AS 7.0 69.00 0.51 2300 0015 0103 0191 T291D188M008(1)S

1800.0 D 10 T191D188K008AS 7.0 69.00 0.51 2300 0016 0104 0192 T291D188K008(1)S 10 Volt Rating at +85°C (7 Volt Rating at +125°C)

150.0 A 20 T191A157M010AS 2.0 17.00 1.51 900 0017 0105 0193 T291A157M010(1)S

150.0 A 10 T191A157K010AS 2.0 17.00 1.51 900 0018 0106 0194 T291A157K010(1)S

560.0 B 20 T191B567M010AS 3.0 53.00 1.26 1450 0019 0107 0195 T291B567M010(1)S

560.0 B 10 T191B567K010AS 3.0 53.00 1.26 1450 0020 0108 0196 T291B567K010(1)S

1200.0 C 20 T191C128M010AS 5.0 68.50 0.76 1850 0021 0109 0197 T291C128M010(1)S

1200.0 C 10 T191C128K010AS 5.0 68.50 0.76 1850 0022 0110 0198 T291C128K010(1)S

1500.0 D 20 T191D158M010AS 7.0 57.00 0.51 2300 0023 0111 0199 T291D158M010(1)S

1500.0 D 10 T191D158K010AS 7.0 57.00 0.51 2300 0024 0112 0200 T291D158K010(1)S 15 Volt Rating at +85°C (10 Volt Rating at +125°C)

100.0 A 20 T191A107M015AS 2.0 15.00 1.99 900 0025 0113 0201 T291A107M015(1)S

100.0 A 10 T191A107K015AS 2.0 15.00 1.99 900 0026 0114 0202 T291A107K015(1)S

390.0 B 20 T191B397M015AS 3.0 37.00 1.26 1450 0027 0115 0203 T291B397M015(1)S

390.0 B 10 T191B397K015AS 3.0 37.00 1.26 1450 0028 0116 0204 T291B397K015(1)S

820.0 C 20 T191C827M015AS 6.0 55.50 0.90 1800 0029 0117 0205 T291C827M015(1)S

820.0 C 10 T191C827K015AS 6.0 55.50 0.90 1800 0030 0118 0206 T291C827K015(1)S

1000.0 D 20 T191D108M015AS 8.0 46.00 0.61 2300 0031 0119 0207 T291D108M015(1)S

1000.0 D 10 T191D108K015AS 8.0 46.00 0.61 2300 0032 0120 0208 T291D108K015(1)S 25 Volt Rating at +85°C (15 Volt Rating at +125°C)

68.0 A 20 T191A686M025AS 2.0 11.00 2.15 850 0033 0121 0209 T291A686M025(1)S

68.0 A 10 T191A686K025AS 2.0 11.00 2.15 850 0034 0122 0210 T291A686K025(1)S

270.0 B 20 T191B277M025AS 3.0 27.50 1.35 1400 0035 0123 0211 T291B277M025(1)S

270.0 B 10 T191B277K025AS 3.0 27.50 1.35 1400 0036 0124 0212 T291B277K025(1)S

560.0 C 20 T191C567M025AS 7.0 38.00 0.90 1750 0037 0125 0213 T291C567M025(1)S

560.0 C 10 T191C567K025AS 7.0 38.00 0.90 1750 0038 0126 0214 T291C567K025(1)S

680.0 D 20 T191D687M025AS 8.0 31.50 0.62 2100 0039 0127 0215 T291D687M025(1)S

680.0 D 10 T191D687K025AS 8.0 31.50 0.62 2100 0040 0128 0216 T291D687K025(1)S 30 Volt Rating at +85°C (20 Volt Rating at +125°C)

56.0 A 20 T191A566M030AS 2.0 11.00 2.61 800 0041 0129 0217 T291A566M030(1)S

56.0 A 10 T191A566K030AS 2.0 11.00 2.61 800 0042 0130 0218 T291A566K030(1)S

220.0 B 20 T191B227M030AS 3.0 21.00 1.27 1200 0043 0131 0219 T291B227M030(1)S

220.0 B 10 T191B227K030AS 3.0 21.00 1.27 1200 0044 0132 0220 T291B227K030(1)S

470.0 C 20 T191C477M030AS 8.0 32.00 0.91 1500 0045 0133 0221 T291C477M030(1)S

470.0 C 10 T191C477K030AS 8.0 32.00 0.91 1500 0046 0134 0222 T291C477K030(1)S

560.0 D 20 T191D567M030AS 9.0 27.50 0.65 2000 0047 0135 0223 T291D567M030(1)S

560.0 D 10 T191D567K030AS 9.0 27.50 0.65 2000 0048 0136 0224 T291D567K030(1)S

Wet Tantalum T191/T291 Series

T191/T291 (CLR91) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/31A (CLR91)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

50 Volt Rating at +85°C (30 Volt Rating at +125°C)

33.0 A 20 T191A336M050AS 2.0 6.15 2.48 700 0049 0137 0225 T291A336M050(1)S

33.0 A 10 T191A336K050AS 2.0 6.15 2.48 700 0050 0138 0226 T291A336K050(1)S

120.0 B 20 T191B127M050AS 4.0 11.25 1.25 1200 0051 0139 0227 T291B127M050(1)S

120.0 B 10 T191B127K050AS 4.0 11.25 1.25 1200 0052 0140 0228 T291B127K050(1)S

270.0 C 20 T191C277M050AS 8.0 18.50 0.91 1450 0053 0141 0229 T291C277M050(1)S

270.0 C 10 T191C277K050AS 8.0 18.50 0.91 1450 0054 0142 0230 T291C277K050(1)S

330.0 D 20 T191D337M050AS 9.0 19.00 0.77 1900 0055 0143 0231 T291D337M050(1)S

330.0 D 10 T191D337K050AS 9.0 19.00 0.77 1900 0056 0144 0232 T291D337K050(1)S 60 Volt Rating at +85°C (40 Volt Rating at +125°C)

27.0 A 20 T191A276M060AS 3.0 5.10 2.51 700 0057 0145 0233 T291A276M060(1)S

27.0 A 10 T191A276K060AS 3.0 5.10 2.51 700 0058 0146 0234 T291A276K060(1)S

100.0 B 20 T191B107M060AS 4.0 9.50 1.26 1100 0059 0147 0235 T291B107M060(1)S

100.0 B 10 T191B107K060AS 4.0 9.50 1.26 1100 0060 0148 0236 T291B107K060(1)S

220.0 C 20 T191C227M060AS 8.0 15.00 0.91 1400 0061 0149 0237 T291C227M060(1)S

220.0 C 10 T191C227K060AS 8.0 15.00 0.91 1400 0062 0150 0238 T291C227K060(1)S

270.0 D 20 T191D277M060AS 9.0 13.50 0.67 1850 0063 0151 0239 T291D277M060(1)S

270.0 D 10 T191D277K060AS 9.0 13.50 0.67 1850 0064 0152 0240 T291D277K060(1)S 75 Volt Rating at +85°C (50 Volt Rating at +125°C)

22.0 A 20 T191A226M075AS 3.0 4.25 2.57 600 0065 0153 0241 T291A226M075(1)S

22.0 A 10 T191A226K075AS 3.0 4.25 2.57 600 0066 0154 0242 T291A226K075(1)S

82.0 B 20 T191B826M075AS 4.0 7.60 1.23 1000 0067 0155 0243 T291B826M075(1)S

82.0 B 10 T191B826K075AS 4.0 7.60 1.23 1000 0068 0156 0244 T291B826K075(1)S

180.0 C 20 T191C187M075AS 9.0 12.20 0.90 1300 0069 0157 0245 T291C187M075(1)S

180.0 C 10 T191C187K075AS 9.0 12.20 0.90 1300 0070 0158 0246 T291C187K075(1)S

220.0 D 20 T191D227M075AS 10.0 18.50 1.12 1800 0071 0159 0247 T291D227M075(1)S

220.0 D 10 T191D227K075AS 10.0 18.50 1.12 1800 0072 0160 0248 T291D227K075(1)S 100 Volt Rating at +85°C (65 Volt Rating at +125°C)

10.0 A 20 T191A106M100AS 3.0 2.25 2.99 800 0073 0161 0249 T291A106M100(1)S

10.0 A 10 T191A106K100AS 3.0 2.25 2.99 800 0074 0162 0250 T291A106K100(1)S

39.0 B 20 T191B396M100AS 5.0 5.20 1.77 1300 0075 0163 0251 T291B396M100(1)S

39.0 B 10 T191B396K100AS 5.0 5.20 1.77 1300 0076 0164 0252 T291B396K100(1)S

68.0 C 20 T191C686M100AS 10.0 5.65 1.11 1600 0077 0165 0253 T291C686M100(1)S

68.0 C 10 T191C686K100AS 10.0 5.65 1.11 1600 0078 0166 0254 T291C686K100(1)S

120.0 D 20 T191D127M100AS 12.0 12.50 1.38 2000 0079 0167 0255 T291D127M100(1)S

120.0 D 10 T191D127K100AS 12.0 12.50 1.38 2000 0080 0168 0256 T291D127K100(1)S 125 Volt Rating at +85°C (85 Volt Rating at +125°C)

6.8 A 20 T191A685M125AS 3.0 3.00 5.86 700 0081 0169 0257 T291A685M125(1)S

6.8 A 10 T191A685K125AS 3.0 3.00 5.86 700 0082 0170 0258 T291A685K125(1)S

27.0 B 20 T191B276M125AS 5.0 3.60 1.77 1200 0083 0171 0259 T291B276M125(1)S

27.0 B 10 T191B276K125AS 5.0 3.60 1.77 1200 0084 0172 0260 T291B276K125(1)S

47.0 C 20 T191C476M125AS 10.0 3.95 1.12 1500 0085 0173 0261 T291C476M125(1)S

47.0 C 10 T191C476K125AS 10.0 3.95 1.12 1500 0086 0174 0262 T291C476K125(1)S

82.0 D 20 T191D826M125AS 12.0 8.70 1.41 1900 0087 0175 0263 T291D826M125(1)S

82.0 D 10 T191D826K125AS 12.0 8.70 1.41 1900 0088 0176 0264 T291D826K125(1)S

T192/T292 (CLR79) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/22F (CLR79)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

6 Volt Rating at +85°C (4 Volt Rating at +125°C)

30.0 A 20 T192A306M006AS 1.0 9.0 3.98 820 0001 0221 0441 T292A306M006(1)S

30.0 A 10 T192A306K006AS 1.0 9.0 3.98 820 0002 0222 0442 T292A306K006(1)S

30.0 A 5 T192A306J006AS 1.0 9.0 3.98 820 0003 0223 0443 T292A306J006(1)S

68.0 A 20 T192A686M006AS 1.0 15.0 3.16 960 0004 0224 0444 T292A686M006(1)S

68.0 A 10 T192A686K006AS 1.0 15.0 3.16 960 0005 0225 0445 T292A686K006(1)S

68.0 A 5 T192A686J006AS 1.0 15.0 3.16 960 0006 0226 0446 T292A686J006(1)S

140.0 B 20 T192B147M006AS 1.0 21.0 1.99 1200 0007 0227 0447 T292B147M006(1)S

140.0 B 10 T192B147K006AS 1.0 21.0 1.99 1200 0008 0228 0448 T292B147K006(1)S

140.0 B 5 T192B147J006AS 1.0 21.0 1.99 1200 0009 0229 0449 T292B147J006(1)S

270.0 B 20 T192B277M006AS 1.0 45.0 2.21 1375 0010 0230 0450 T292B277M006(1)S

270.0 B 10 T192B277K006AS 1.0 45.0 2.21 1375 0011 0231 0451 T292B277K006(1)S

270.0 B 5 T192B277J006AS 1.0 45.0 2.21 1375 0012 0232 0452 T292B277J006(1)S

330.0 C 20 T192C337M006AS 2.0 36.0 1.45 1800 0013 0233 0453 T292C337M006(1)S

330.0 C 10 T192C337K006AS 2.0 36.0 1.45 1800 0014 0234 0454 T292C337K006(1)S

330.0 C 5 T192C337J006AS 2.0 36.0 1.45 1800 0015 0235 0455 T292C337J006(1)S

560.0 C 20 T192C567M006AS 2.0 55.0 1.30 1900 0016 0236 0456 T292C567M006(1)S

560.0 C 10 T192C567K006AS 2.0 55.0 1.30 1900 0017 0237 0457 T292C567K006(1)S

560.0 C 5 T192C567J006AS 2.0 55.0 1.30 1900 0018 0238 0458 T292C567J006(1)S

1200.0 D 20 T192D128M006AS 3.0 90.0 1.00 2265 0019 0239 0459 T292D128M006(1)S

1200.0 D 10 T192D128K006AS 3.0 90.0 1.00 2265 0020 0240 0460 T292D128K006(1)S 8 Volt Rating at +85°C (5 Volt Rating at +125°C)

25.0 A 20 T192A256M008AS 1.0 7.5 3.98 820 0021 0241 0461 T292A256M008(1)S

25.0 A 10 T192A256K008AS 1.0 7.5 3.98 820 0022 0242 0462 T292A256K008(1)S

25.0 A 5 T192A256J008AS 1.0 7.5 3.98 820 0023 0243 0463 T292A256J008(1)S

56.0 A 20 T192A566M008AS 1.0 14.0 3.32 900 0024 0244 0464 T292A566M008(1)S

56.0 A 10 T192A566K008AS 1.0 14.0 3.32 900 0025 0245 0465 T292A566K008(1)S

56.0 A 5 T192A566J008AS 1.0 14.0 3.32 900 0026 0246 0466 T292A566J008(1)S

120.0 B 20 T192B127M008AS 1.0 20.0 2.21 1220 0027 0247 0467 T292B127M008(1)S

120.0 B 10 T192B127K008AS 1.0 20.0 2.21 1220 0028 0248 0468 T292B127K008(1)S

120.0 B 5 T192B127J008AS 1.0 20.0 2.21 1220 0029 0249 0469 T292B127J008(1)S

220.0 B 20 T192B227M008AS 1.0 37.0 2.23 1370 0030 0250 0470 T292B227M008(1)S

220.0 B 10 T192B227K008AS 1.0 37.0 2.23 1370 0031 0251 0471 T292B227K008(1)S

220.0 B 5 T192B227J008AS 1.0 37.0 2.23 1370 0032 0252 0472 T292B227J008(1)S

290.0 C 20 T192C297M008AS 2.0 34.0 1.56 1770 0033 0253 0473 T292C297M008(1)S

290.0 C 10 T192C297K008AS 2.0 34.0 1.56 1770 0034 0254 0474 T292C297K008(1)S

290.0 C 5 T192C297J008AS 2.0 34.0 1.56 1770 0035 0255 0475 T292C297J008(1)S

430.0 C 20 T192C437M008AS 2.0 46.0 1.42 1825 0036 0256 0476 T292C437M008(1)S

430.0 C 10 T192C437K008AS 2.0 46.0 1.42 1825 0037 0257 0477 T292C437K008(1)S

430.0 C 5 T192C437J008AS 2.0 46.0 1.42 1825 0038 0258 0478 T292C437J008(1)S

850.0 D 20 T192D857M008AS 4.0 60.0 0.94 2330 0039 0259 0479 T292D857M008(1)S

850.0 D 10 T192D857K008AS 4.0 60.0 0.94 2330 0040 0260 0480 T292D857K008(1)S 10 Volt Rating at +85°C (7 Volt Rating at +125°C)

20.0 A 20 T192A206M010AS 1.0 6.0 3.98 820 0041 0261 0481 T292A206M010(1)S

20.0 A 10 T192A206K010AS 1.0 6.0 3.98 820 0042 0262 0482 T292A206K010(1)S

20.0 A 5 T192A206J010AS 1.0 6.0 3.98 820 0043 0263 0483 T292A206J010(1)S

47.0 A 20 T192A476M010AS 1.0 13.0 3.67 855 0044 0264 0484 T292A476M010(1)S

47.0 A 10 T192A476K010AS 1.0 13.0 3.67 855 0045 0265 0485 T292A476K010(1)S

47.0 A 5 T192A476J010AS 1.0 13.0 3.67 855 0046 0266 0486 T292A476J010(1)S

100.0 B 20 T192B107M010AS 1.0 15.0 1.99 1200 0047 0267 0487 T292B107M010(1)S

100.0 B 10 T192B107K010AS 1.0 15.0 1.99 1200 0048 0268 0488 T292B107K010(1)S

100.0 B 5 T192B107J010AS 1.0 15.0 1.99 1200 0049 0269 0489 T292B107J010(1)S

180.0 B 20 T192B187M010AS 1.0 30.0 2.21 1365 0050 0270 0490 T292B187M010(1)S

180.0 B 10 T192B187K010AS 1.0 30.0 2.21 1365 0051 0271 0491 T292B187K010(1)S

180.0 B 5 T192B187J010AS 1.0 30.0 2.21 1365 0052 0272 0492 T292B187J010(1)S

250.0 C 20 T192C257M010AS 2.0 30.0 1.59 1720 0053 0273 0493 T292C257M010(1)S

250.0 C 10 T192C257K010AS 2.0 30.0 1.59 1720 0054 0274 0494 T292C257K010(1)S

250.0 C 5 T192C257J010AS 2.0 30.0 1.59 1720 0055 0275 0495 T292C257J010(1)S

390.0 C 20 T192C397M010AS 2.0 44.0 1.50 1800 0056 0276 0496 T292C397M010(1)S

390.0 C 10 T192C397K010AS 2.0 44.0 1.50 1800 0057 0277 0497 T292C397K010(1)S

390.0 C 5 T192C397J010AS 2.0 44.0 1.50 1800 0058 0278 0498 T292C397J010(1)S

750.0 D 20 T192D757M010AS 4.0 50.0 0.88 2360 0059 0279 0499 T292D757M010(1)S

750.0 D 10 T192D757K010AS 4.0 50.0 0.88 2360 0060 0280 0500 T292D757K010(1)S

Wet Tantalum T192/T292 Series

Max. ESR Max. Ripple MIL-PRF-39006/22F (CLR79)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

15 Volt Rating at +85°C (10 Volt Rating at +125°C)

15.0 A 20 T192A156M015AS 1.0 5.0 4.42 780 0061 0281 0501 T292A156M015(1)S

15.0 A 10 T192A156K015AS 1.0 5.0 4.42 780 0062 0282 0502 T292A156K015(1)S

15.0 A 5 T192A156J015AS 1.0 5.0 4.42 780 0063 0283 0503 T292A156J015(1)S

33.0 A 20 T192A336M015AS 1.0 10.0 4.02 820 0064 0284 0504 T292A336M015(1)S

33.0 A 10 T192A336K015AS 1.0 10.0 4.02 820 0065 0285 0505 T292A336K015(1)S

33.0 A 5 T192A336J015AS 1.0 10.0 4.02 820 0066 0286 0506 T292A336J015(1)S

70.0 B 20 T192B706M015AS 1.0 13.0 2.46 1150 0067 0287 0507 T292B706M015(1)S

70.0 B 10 T192B706K015AS 1.0 13.0 2.46 1150 0068 0288 0508 T292B706K015(1)S

70.0 B 5 T192B706J015AS 1.0 13.0 2.46 1150 0069 0289 0509 T292B706J015(1)S

120.0 B 20 T192B127M015AS 1.0 18.0 1.99 1450 0070 0290 0510 T292B127M015(1)S

120.0 B 10 T192B127K015AS 1.0 18.0 1.99 1450 0071 0291 0511 T292B127K015(1)S

120.0 B 5 T192B127J015AS 1.0 18.0 1.99 1450 0072 0292 0512 T292B127J015(1)S

170.0 C 20 T192C177M015AS 2.0 25.0 1.95 1480 0073 0293 0513 T292C177M015(1)S

170.0 C 10 T192C177K015AS 2.0 25.0 1.95 1480 0074 0294 0514 T292C177K015(1)S

170.0 C 5 T192C177J015AS 2.0 25.0 1.95 1480 0075 0295 0515 T292C177J015(1)S

270.0 C 20 T192C277M015AS 2.0 32.0 1.57 1740 0076 0296 0516 T292C277M015(1)S

270.0 C 10 T192C277K015AS 2.0 32.0 1.57 1740 0077 0297 0517 T292C277K015(1)S

270.0 C 5 T192C277J015AS 2.0 32.0 1.57 1740 0078 0298 0518 T292C277J015(1)S

540.0 D 20 T192D547M015AS 6.0 40.0 0.98 2330 0079 0299 0519 T292D547M015(1)S

540.0 D 10 T192D547K015AS 6.0 40.0 0.98 2330 0080 0300 0520 T292D547K015(1)S 25 Volt Rating at +85°C - 15 Volt Rating at +125°C

10.0 A 20 T192A106M025AS 1.0 4.0 5.31 715 0081 0301 0521 T292A106M025(1)S

10.0 A 10 T192A106K025AS 1.0 4.0 5.31 715 0082 0302 0522 T292A106K025(1)S

10.0 A 5 T192A106J025AS 1.0 4.0 5.31 715 0083 0303 0523 T292A106J025(1)S

22.0 A 20 T192A226M025AS 1.0 6.6 3.98 825 0084 0304 0524 T292A226M025(1)S

22.0 A 10 T192A226K025AS 1.0 6.6 3.98 825 0085 0305 0525 T292A226K025(1)S

22.0 A 5 T192A226J025AS 1.0 6.6 3.98 825 0086 0306 0526 T292A226J025(1)S

50.0 B 20 T192B506M025AS 1.0 11.0 2.92 1130 0087 0307 0527 T292B506M025(1)S

50.0 B 10 T192B506K025AS 1.0 11.0 2.92 1130 0088 0308 0528 T292B506K025(1)S

50.0 B 5 T192B506J025AS 1.0 11.0 2.92 1130 0089 0309 0529 T292B506J025(1)S

100.0 B 20 T192B107M025AS 1.0 15.0 1.99 1435 0090 0310 0530 T292B107M025(1)S

100.0 B 10 T192B107K025AS 1.0 15.0 1.99 1435 0091 0311 0531 T292B107K025(1)S

100.0 B 5 T192B107J025AS 1.0 15.0 1.99 1435 0092 0312 0532 T292B107J025(1)S

120.0 C 20 T192C127M025AS 2.0 21.0 2.32 1450 0093 0313 0533 T292C127M025(1)S

120.0 C 10 T192C127K025AS 2.0 21.0 2.32 1450 0094 0314 0534 T292C127K025(1)S

120.0 C 5 T192C127J025AS 2.0 21.0 2.32 1450 0095 0315 0535 T292C127J025(1)S

180.0 C 20 T192C187M025AS 2.0 26.0 1.92 1525 0096 0316 0536 T292C187M025(1)S

180.0 C 10 T192C187K025AS 2.0 26.0 1.92 1525 0097 0317 0537 T292C187K025(1)S

180.0 C 5 T192C187J025AS 2.0 26.0 1.92 1525 0098 0318 0538 T292C187J025(1)S

350.0 D 20 T192D357M025AS 7.0 35.0 1.33 1970 0099 0319 0539 T292D357M025(1)S

350.0 D 10 T192D357K025AS 7.0 35.0 1.33 1970 0100 0320 0540 T292D357K025(1)S 30 Volt Rating at +85°C - 20 Volt Rating at +125°C

8.0 A 20 T192A805M030AS 1.0 4.0 6.64 640 0101 0321 0541 T292A805M030(1)S

8.0 A 10 T192A805K030AS 1.0 4.0 6.64 640 0102 0322 0542 T292A805K030(1)S

8.0 A 5 T192A805J030AS 1.0 4.0 6.64 640 0103 0323 0543 T292A805J030(1)S

15.0 A 20 T192A156M030AS 1.0 5.0 4.42 780 0104 0324 0544 T292A156M030(1)S

15.0 A 10 T192A156K030AS 1.0 5.0 4.42 780 0105 0325 0545 T292A156K030(1)S

15.0 A 5 T192A156J030AS 1.0 5.0 4.42 780 0106 0326 0546 T292A156J030(1)S

40.0 B 20 T192B406M030AS 1.0 10.0 3.32 1120 0107 0327 0547 T292B406M030(1)S

40.0 B 10 T192B406K030AS 1.0 10.0 3.32 1120 0108 0328 0548 T292B406K030(1)S

40.0 B 5 T192B406J030AS 1.0 10.0 3.32 1120 0109 0329 0549 T292B406J030(1)S

68.0 B 20 T192B686M030AS 1.0 13.0 2.54 1285 0110 0330 0550 T292B686M030(1)S

68.0 B 10 T192B686K030AS 1.0 13.0 2.54 1285 0111 0331 0551 T292B686K030(1)S

68.0 B 5 T192B686J030AS 1.0 13.0 2.54 1285 0112 0332 0552 T292B686J030(1)S

100.0 C 20 T192C107M030AS 2.0 17.0 2.26 1450 0113 0333 0553 T292C107M030(1)S

100.0 C 10 T192C107K030AS 2.0 17.0 2.26 1450 0114 0334 0554 T292C107K030(1)S

100.0 C 5 T192C107J030AS 2.0 17.0 2.26 1450 0115 0335 0555 T292C107J030(1)S

150.0 C 20 T192C157M030AS 2.0 23.0 2.03 1525 0116 0336 0556 T292C157M030(1)S

150.0 C 10 T192C157K030AS 2.0 23.0 2.03 1525 0117 0337 0557 T292C157K030(1)S

150.0 C 5 T192C157J030AS 2.0 23.0 2.03 1525 0118 0338 0558 T292C157J030(1)S

300.0 D 20 T192D307M030AS 8.0 31.0 1.37 1950 0119 0339 0559 T292D307M030(1)S

300.0 D 10 T192D307K030AS 8.0 31.0 1.37 1950 0120 0340 0560 T292D307K030(1)S

T192/T292 (CLR79) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/22F (CLR79)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

35 Volt Rating at +85°C (22 Volt Rating at +125°C)

7.0 A 10,20,5 T192A705(2)035AS 0.75 7.4 7.0 620 N/A N/A N/A N/A

15.0 A 10,20,5 T192A156(2)035AS 0.75 14.0 6.2 660 N/A N/A N/A N/A

35.0 B 10,20,5 T192B356(2)035AS 1.00 22.2 4.2 1000 N/A N/A N/A N/A

68.0 B 10,20,5 T192B686(2)035AS 1.00 30.0 2.9 1195 N/A N/A N/A N/A

82.0 C 10,20,5 T192C826(2)035AS 2.00 31.0 2.5 1400 N/A N/A N/A N/A

120.0 C 10,20,5 T192C127(2)035AS 2.00 43.4 2.4 1490 N/A N/A N/A N/A

270.0 D 10,20,5 T192D277(2)035AS 3.00 57.0 1.4 1950 N/A N/A N/A N/A 50 Volt Rating at +85°C (30 Volt Rating at +125°C)

5.0 A 20 T192A505M050AS 1.0 3.0 7.96 580 0121 0341 0561 T292A505M050(1)S

5.0 A 10 T192A505K050AS 1.0 3.0 7.96 580 0122 0342 0562 T292A505K050(1)S

5.0 A 5 T192A505J050AS 1.0 3.0 7.96 580 0123 0343 0563 T292A505J050(1)S

10.0 A 20 T192A106M050AS 1.0 4.0 5.31 715 0124 0344 0564 T292A106M050(1)S

10.0 A 10 T192A106K050AS 1.0 4.0 5.31 715 0125 0345 0565 T292A106K050(1)S

10.0 A 5 T192A106J050AS 1.0 4.0 5.31 715 0126 0346 0566 T292A106J050(1)S

25.0 B 20 T192B256M050AS 1.0 8.0 4.25 1005 0127 0347 0567 T292B256M050(1)S

25.0 B 10 T192B256K050AS 1.0 8.0 4.25 1005 0128 0348 0568 T292B256K050(1)S

25.0 B 5 T192B256J050AS 1.0 8.0 4.25 1005 0129 0349 0569 T292B256J050(1)S

47.0 B 20 T192B476M050AS 1.0 11.0 3.11 1155 0130 0350 0570 T292B476M050(1)S

47.0 B 10 T192B476K050AS 1.0 11.0 3.11 1155 0131 0351 0571 T292B476K050(1)S

47.0 B 5 T192B476J050AS 1.0 11.0 3.11 1155 0132 0352 0572 T292B476J050(1)S

60.0 C 20 T192C606M050AS 2.0 12.0 2.65 1335 0133 0353 0573 T292C606M050(1)S

60.0 C 10 T192C606K050AS 2.0 12.0 2.65 1335 0134 0354 0574 T292C606K050(1)S

60.0 C 5 T192C606J050AS 2.0 12.0 2.65 1335 0135 0355 0575 T292C606J050(1)S

82.0 C 20 T192C826M050AS 2.0 15.0 2.43 1400 0136 0356 0576 T292C826M050(1)S

82.0 C 10 T192C826K050AS 2.0 15.0 2.43 1400 0137 0357 0577 T292C826K050(1)S

82.0 C 5 T192C826J050AS 2.0 15.0 2.43 1400 0138 0358 0578 T292C826J050(1)S

160.0 D 20 T192D167M050AS 8.0 17.0 1.41 1900 0139 0359 0579 T292D167M050(1)S

160.0 D 10 T192D167K050AS 8.0 17.0 1.41 1900 0140 0360 0580 T292D167K050(1)S 60 Volt Rating at +85°C (40 Volt Rating at +125°C)

4.0 A 20 T192A405M060AS 1.0 2.8 9.29 525 0141 0361 0581 T292A405M060(1)S

4.0 A 10 T192A405K060AS 1.0 2.8 9.29 525 0142 0362 0582 T292A405K060(1)S

4.0 A 5 T192A405J060AS 1.0 2.8 9.29 525 0143 0363 0583 T292A405J060(1)S

8.2 A 20 T192A825M060AS 1.0 4.0 6.47 625 0144 0364 0584 T292A825M060(1)S

8.2 A 10 T192A825K060AS 1.0 4.0 6.47 625 0145 0365 0585 T292A825K060(1)S

8.2 A 5 T192A825J060AS 1.0 4.0 6.47 625 0146 0366 0586 T292A825J060(1)S

20.0 B 20 T192B206M060AS 1.0 7.0 4.64 930 0147 0367 0587 T292B206M060(1)S

20.0 B 10 T192B206K060AS 1.0 7.0 4.64 930 0148 0368 0588 T292B206K060(1)S

20.0 B 5 T192B206J060AS 1.0 7.0 4.64 930 0149 0369 0589 T292B206J060(1)S

39.0 B 20 T192B396M060AS 1.0 10.0 3.40 1110 0150 0370 0590 T292B396M060(1)S

39.0 B 10 T192B396K060AS 1.0 10.0 3.40 1110 0151 0371 0591 T292B396K060(1)S

39.0 B 5 T192B396J060AS 1.0 10.0 3.40 1110 0152 0372 0592 T292B396J060(1)S

50.0 C 20 T192C506M060AS 2.0 10.0 2.65 1330 0153 0373 0593 T292C506M060(1)S

50.0 C 10 T192C506K060AS 2.0 10.0 2.65 1330 0154 0374 0594 T292C506K060(1)S

50.0 C 5 T192C506J060AS 2.0 10.0 2.65 1330 0155 0375 0595 T292C506J060(1)S

68.0 C 20 T192C686M060AS 2.0 13.0 2.54 1365 0156 0376 0596 T292C686M060(1)S

68.0 C 10 T192C686K060AS 2.0 13.0 2.54 1365 0157 0377 0597 T292C686K060(1)S

68.0 C 5 T192C686J060AS 2.0 13.0 2.54 1365 0158 0378 0598 T292C686J060(1)S

140.0 D 20 T192D147M060AS 8.0 16.0 1.52 1850 0159 0379 0599 T292D147M060(1)S

140.0 D 10 T192D147K060AS 8.0 16.0 1.52 1850 0160 0380 0600 T292D147K060(1)S 75 Volt Rating at +85°C (50 Volt Rating at +125°C)

3.5 A 20 T192A355M075AS 1.0 2.5 9.48 525 0161 0381 0601 T292A355M075(1)S

3.5 A 10 T192A355K075AS 1.0 2.5 9.48 525 0162 0382 0602 T292A355K075(1)S

3.5 A 5 T192A355J075AS 1.0 2.5 9.48 525 0163 0383 0603 T292A355J075(1)S

6.8 A 20 T192A685M075AS 1.0 3.5 6.83 610 0164 0384 0604 T292A685M075(1)S

6.8 A 10 T192A685K075AS 1.0 3.5 6.83 610 0165 0385 0605 T292A685K075(1)S

6.8 A 5 T192A685J075AS 1.0 3.5 6.83 610 0166 0386 0606 T292A685J075(1)S

15.0 B 20 T192B156M075AS 1.0 6.0 5.31 890 0167 0387 0607 T292B156M075(1)S

15.0 B 10 T192B156K075AS 1.0 6.0 5.31 890 0168 0388 0608 T292B156K075(1)S

15.0 B 5 T192B156J075AS 1.0 6.0 5.31 890 0169 0389 0609 T292B156J075(1)S

Wet Tantalum T192/T292 Series

T192/T292 (CLR79) Ratings & Part Number Reference

Max. ESR Max. Ripple MIL-PRF-39006/22F (CLR79)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

75 Volt Rating at +85°C (50 Volt Rating at +125°C) Continued

33.0 B 20 T192B336M075AS 1.0 10.0 4.02 1000 0170 0390 0610 T292B336M075(1)S

33.0 B 10 T192B336K075AS 1.0 10.0 4.02 1000 0171 0391 0611 T292B336K075(1)S

33.0 B 5 T192B336J075AS 1.0 10.0 4.02 1000 0172 0392 0612 T292B336J075(1)S

40.0 C 20 T192C406M075AS 2.0 9.0 2.99 1250 0173 0393 0613 T292C406M075(1)S

40.0 C 10 T192C406K075AS 2.0 9.0 2.99 1250 0174 0394 0614 T292C406K075(1)S

40.0 C 5 T192C406J075AS 2.0 9.0 2.99 1250 0175 0395 0615 T292C406J075(1)S

56.0 C 20 T192C566M075AS 2.0 11.0 2.61 1335 0176 0396 0616 T292C566M075(1)S

56.0 C 10 T192C566K075AS 2.0 11.0 2.61 1335 0177 0397 0617 T292C566K075(1)S

56.0 C 5 T192C566J075AS 2.0 11.0 2.61 1335 0178 0398 0618 T292C566J075(1)S

110.0 D 20 T192D117M075AS 9.0 12.0 1.45 1850 0179 0399 0619 T292D117M075(1)S

110.0 D 10 T192D117K075AS 9.0 12.0 1.45 1850 0180 0400 0620 T292D117K075(1)S

100 Volt Rating at +85°C (65 Volt Rating at +125°C)

2.5 A 20 T192A255M100AS 1.0 2.0 10.62 505 0181 0401 0621 T292A255M100(1)S

2.5 A 10 T192A255K100AS 1.0 2.0 10.62 505 0182 0402 0622 T292A255K100(1)S

2.5 A 5 T192A255J100AS 1.0 2.0 10.62 505 0183 0403 0623 T292A255J100(1)S

4.7 A 20 T192A475M100AS 1.0 3.0 8.47 565 0184 0404 0624 T292A475M100(1)S

4.7 A 10 T192A475K100AS 1.0 3.0 8.47 565 0185 0405 0625 T292A475K100(1)S

4.7 A 5 T192A475J100AS 1.0 3.0 8.47 565 0186 0406 0626 T292A475J100(1)S

11.0 B 20 T192B116M100AS 1.0 5.0 6.03 835 0187 0407 0627 T292B116M100(1)S

11.0 B 10 T192B116K100AS 1.0 5.0 6.03 835 0188 0408 0628 T292B116K100(1)S

11.0 B 5 T192B116J100AS 1.0 5.0 6.03 835 0189 0409 0629 T292B116J100(1)S

22.0 B 20 T192B226M100AS 1.0 7.5 4.52 965 0190 0410 0630 T292B226M100(1)S

22.0 B 10 T192B226K100AS 1.0 7.5 4.52 965 0191 0411 0631 T292B226K100(1)S

22.0 B 5 T192B226J100AS 1.0 7.5 4.52 965 0192 0412 0632 T292B226J100(1)S

30.0 C 20 T192C306M100AS 2.0 7.0 3.10 1240 0193 0413 0633 T292C306M100(1)S

30.0 C 10 T192C306K100AS 2.0 7.0 3.10 1240 0194 0414 0634 T292C306K100(1)S

30.0 C 5 T192C306J100AS 2.0 7.0 3.10 1240 0195 0415 0635 T292C306J100(1)S

43.0 C 20 T192C436M100AS 2.0 8.5 2.62 1335 0196 0416 0636 T292C436M100(1)S

43.0 C 10 T192C436K100AS 2.0 8.5 2.62 1335 0197 0417 0637 T292C436K100(1)S

43.0 C 5 T192C436J100AS 2.0 8.5 2.62 1335 0198 0418 0638 T292C436J100(1)S

86.0 D 20 T192D866M100AS 9.0 10.0 1.54 1800 0199 0419 0639 T292D866M100(1)S

86.0 D 10 T192D866K100AS 9.0 10.0 1.54 1800 0200 0420 0640 T292D866K100(1)S 125 Volt Rating at +85°C (85 Volt Rating at +125°C)

1.7 A 20 T192A175M125AS 1.0 2.0 15.61 415 0201 0421 0641 T292A175M125(1)S

1.7 A 10 T192A175K125AS 1.0 2.0 15.61 415 0202 0422 0642 T292A175K125(1)S

1.7 A 5 T192A175J125AS 1.0 2.0 15.61 415 0203 0423 0643 T292A175J125(1)S

3.6 A 20 T192A365M125AS 1.0 2.7 9.95 520 0204 0424 0644 T292A365M125(1)S

3.6 A 10 T192A365K125AS 1.0 2.7 9.95 520 0205 0425 0645 T292A365K125(1)S

3.6 A 5 T192A365J125AS 1.0 2.7 9.95 520 0206 0426 0646 T292A365J125(1)S

9.0 B 20 T192B905M125AS 1.0 5.0 7.37 755 0207 0427 0647 T292B905M125(1)S

9.0 B 10 T192B905K125AS 1.0 5.0 7.37 755 0208 0428 0648 T292B905K125(1)S

9.0 B 5 T192B905J125AS 1.0 5.0 7.37 755 0209 0429 0649 T292B905J125(1)S

14.0 B 20 T192B146M125AS 1.0 6.0 5.69 860 0210 0430 0650 T292B146M125(1)S

14.0 B 10 T192B146K125AS 1.0 6.0 5.69 860 0211 0431 0651 T292B146K125(1)S

14.0 B 5 T192B146J125AS 1.0 6.0 5.69 860 0212 0432 0652 T292B146J125(1)S

18.0 C 20 T192C186M125AS 2.0 5.0 3.69 1130 0213 0433 0653 T292C186M125(1)S

18.0 C 10 T192C186K125AS 2.0 5.0 3.69 1130 0214 0434 0654 T292C186K125(1)S

18.0 C 5 T192C186J125AS 2.0 5.0 3.69 1130 0215 0435 0655 T292C186J125(1)S

25.0 C 20 T192C256M125AS 2.0 6.0 3.18 1200 0216 0436 0656 T292C256M125(1)S

25.0 C 10 T192C256K125AS 2.0 6.0 3.18 1200 0217 0437 0657 T292C256K125(1)S

25.0 C 5 T192C256J125AS 2.0 6.0 3.18 1200 0218 0438 0658 T292C256J125(1)S

56.0 D 20 T192D566M125AS 10.0 6.5 1.54 1800 0219 0439 0659 T292D566M125(1)S

56.0 D 10 T192D566K125AS 10.0 6.5 1.54 1800 0220 0440 0660 T292D566K125(1)S

Max. ESR Max. Ripple MIL-PRF-39006/25B (CLR81)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

6 Volt Rating at +85°C (4 Volt Rating at +125°C)

180.0 A 20,10,5 T195A187(2)006AS 6.0 37.0 2.70 1010 N/A N/A N/A N/A

220.0 A 20 T195A227M006AS 2.0 50.0 3.02 1000 0001 0089 0177 T295A227M006(1)S

220.0 A 10 T195A227K006AS 2.0 50.0 3.02 1000 0002 0090 0178 T295A227K006(1)S

560.0 B 20,10,5 T195B567(2)006AS 3.0 76.0 1.80 1550 N/A N/A N/A N/A

820.0 B 20 T195B827M006AS 3.0 155.0 2.51 1500 0003 0091 0179 T295B827M006(1)S

820.0 B 10 T195B827K006AS 3.0 155.0 2.51 1500 0004 0092 0180 T295B827K006(1)S

1200.0 C 20,10,5 T195C128(2)006AS 6.0 118.0 1.30 1930 N/A N/A N/A N/A

1500.0 C 20 T195C158M006AS 5.0 172.0 1.52 1900 0005 0093 0181 T295C158M006(1)S

1500.0 C 10 T195C158K006AS 5.0 172.0 1.52 1900 0006 0094 0182 T295C158K006(1)S

2200.0 D 20 T195D228M006AS 6.0 170.0 1.03 2300 0007 0095 0183 T295D228M006(1)S

2200.0 D 10 T195D228K006AS 6.0 170.0 1.03 2300 0008 0096 0184 T295D228K006(1)S 8 Volt Rating at +85°C (5 Volt Rating at +125°C)

150.0 A 20,10,5 T195A157(2)008AS 2.0 34.0 3.00 960 N/A N/A N/A N/A

180.0 A 20 T195A187M008AS 2.0 41.0 3.02 1000 0009 0097 0185 T295A187M008(1)S

180.0 A 10 T195A187K008AS 2.0 41.0 3.02 1000 0010 0098 0186 T295A187K008(1)S

470.0 B 20,10,5 T195B477(2)008AS 3.0 67.0 1.90 1500 N/A N/A N/A N/A

680.0 B 20 T195B687M008AS 3.0 130.0 2.54 1500 0011 0099 0187 T295B687M008(1)S

680.0 B 10 T195B687K008AS 3.0 130.0 2.54 1500 0012 0100 0188 T295B687K008(1)S

1000.0 C 20,10,5 T195C108(2)008AS 6.0 98.0 1.30 1930 N/A N/A N/A N/A

1500.0 C 20 T195C158M008AS 5.0 170.0 1.50 1900 0013 0101 0189 T295C158M008(1)S

1500.0 C 10 T195C158K008AS 5.0 170.0 1.50 1900 0014 0102 0190 T295C158K008(1)S

1800.0 D 20 T195D188M008AS 7.0 138.0 1.02 2300 0015 0103 0191 T295D188M008(1)S

1800.0 D 10 T195D188K008AS 7.0 138.0 1.02 2300 0016 0104 0192 T295D188K008(1)S 10 Volt Rating at +85°C (7 Volt Rating at +125°C)

120.0 A 20,10,5 T195A127(2)010AS 2.0 29.0 3.20 930 N/A N/A N/A N/A

150.0 A 20 T195A157M010AS 2.0 34.0 3.01 900 0017 0105 0193 T295A157M010(1)S

150.0 A 10 T195A157K010AS 2.0 34.0 3.01 900 0018 0106 0194 T295A157K010(1)S

390.0 B 20,10,5 T195B397(2)010AS 3.0 59.0 2.00 1470 N/A N/A N/A N/A

560.0 B 20 T195B567M010AS 3.0 106.0 2.51 1450 0019 0107 0195 T295B567M010(1)S

560.0 B 10 T195B567K010AS 3.0 106.0 2.51 1450 0020 0108 0196 T295B567K010(1)S

820.0 C 20,10,5 T195B827M010AS 6.0 80.0 1.30 1930 N/A N/A N/A N/A

1200.0 C 20 T195C128M010AS 5.0 137.0 1.51 1850 0021 0109 0197 T295C128M010(1)S

1200.0 C 10 T195C128K010AS 5.0 137.0 1.51 1850 0022 0110 0198 T295C128K010(1)S

1500.0 D 20 T195D158M010AS 7.0 114.0 1.01 2300 0023 0111 0199 T295D158M010(1)S

1500.0 D 10 T195D158K010AS 7.0 114.0 1.01 2300 0024 0112 0200 T295D158K010(1)S 15 Volt Rating at +85°C (10 Volt Rating at +125°C)

82.0 A 20,10,5 T195A826(2)015AS 2.0 20.0 3.30 915 N/A N/A N/A N/A

100.0 A 20 T195A107M015AS 2.0 30.0 3.98 900 0025 0113 0201 T295A107M015(1)S

100.0 A 10 T195A107K015AS 2.0 30.0 3.98 900 0026 0114 0202 T295A107K015(1)S

270.0 B 20,10,5 T195B277(2)015AS 3.0 43.0 2.10 1430 N/A N/A N/A N/A

390.0 B 20 T195B397M015AS 3.0 74.0 2.52 1450 0027 0115 0203 T295B397M015(1)S

390.0 B 10 T195B397K015AS 3.0 74.0 2.52 1450 0028 0116 0204 T295B397K015(1)S

680.0 C 20,10,5 T195C687(2)015AS 6.0 72.0 1.40 1860 N/A N/A N/A N/A

820.0 C 20 T195C827M015AS 6.0 111.0 1.80 1800 0029 0117 0205 T295C827M015(1)S

820.0 C 10 T195C827K015AS 6.0 111.0 1.80 1800 0030 0118 0206 T295C827K015(1)S

1000.0 D 20 T195D108M015AS 8.0 92.0 1.22 2300 0031 0119 0207 T295D108M015(1)S

1000.0 D 10 T195D108K015AS 8.0 92.0 1.22 2300 0032 0120 0208 T295D108K015(1)S 25 Volt Rating at +85°C (15 Volt Rating at +125°C)

56.0 A 20,10,5 T195A566(2)025AS 2.0 15.0 3.50 890 N/A N/A N/A N/A

68.0 A 20 T195A686M025AS 2.0 22.0 4.29 850 0033 0121 0209 T295A686M025(1)S

68.0 A 10 T195A686K025AS 2.0 22.0 4.29 850 0034 0122 0210 T295A686K025(1)S

180.0 B 20,10,5 T195B187(2)025AS 3.0 30.0 2.2 1400 N/A N/A N/A N/A

270.0 B 20 T195B277M025AS 3.0 55.0 2.70 1400 0035 0123 0211 T295B277M025(1)S

270.0 B 10 T195B277K025AS 3.0 55.0 2.70 1400 0036 0124 0212 T295B277K025(1)S

470.0 C 20,10,5 T195C477K025AS 6.0 53.0 1.50 1800 N/A N/A N/A N/A

560.0 C 20 T195C567M025AS 7.0 76.0 1.80 1750 0037 0125 0213 T295C567M025(1)S

560.0 C 10 T195C567K025AS 7.0 76.0 1.80 1750 0038 0126 0214 T295C567K025(1)S

680.0 D 20 T195D687M025AS 8.0 63.0 1.23 2100 0039 0127 0215 T295D687M025(1)S

680.0 D 10 T195D687K025AS 8.0 63.0 1.23 2100 0040 0128 0216 T295D687K025(1)S

T195/T295 (CLR81) Ratings & Part Number Reference

Wet Tantalum T195/T295 Series

Max. ESR Max. Ripple MIL-PRF-39006/25B (CLR81)

Max. D.C. Max. D.F. Ohms at Current Capacitors Dash Number

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at Reference (#) KEMET Military

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz Failure Rate (%/1000 Hrs) Equivalent

M(1.0) P(0.1) R(0.01)

30 Volt Rating at +85°C (20 Volt Rating at +125°C)

47.0 A 20,10,5 T195A476(2)030AS 2.0 14.0 4.00 830 N/A N/A N/A N/A

56.0 A 20 T195A566M030AS 2.0 22.0 5.21 800 0041 0129 0217 T295A566M030(1)S

56.0 A 10 T195A566K030AS 2.0 22.0 5.21 800 0042 0130 0218 T295A566K030(1)S

150.0 B 20,10,5 T195B157(2)030AS 3.0 27.0 2.40 1340 N/A N/A N/A N/A

220.0 B 20 T195B227M030AS 3.0 42.0 2.53 1200 0043 0131 0219 T295B227M030(1)S

220.0 B 10 T195B227K030AS 3.0 42.0 2.53 1200 0044 0132 0220 T295B227K030(1)S

390.0 C 20,10,5 T195C397(2)030AS 6.0 47.0 1.60 1740 N/A N/A N/A N/A

470.0 C 20 T195C477M030AS 8.0 64.0 1.81 1500 0045 0133 0221 T295C477M030(1)S

470.0 C 10 T195C477K030AS 8.0 64.0 1.81 1500 0046 0134 0222 T295C477K030(1)S

560.0 D 20 T195D567M030AS 9.0 55.0 1.30 2000 0047 0135 0223 T295D567M030(1)S

560.0 D 10 T195D567K030AS 9.0 55.0 1.30 2000 0048 0136 0224 T295D567K030(1)S 35 Volt Rating at +85°C (22 Volt Rating at +125°C)

39.0 A 20,10,5 T195A396(2)035AS 2.0 12.0 4.10 820 N/A N/A N/A N/A

120.0 B 20,10,5 T195B127(2)035AS 3.0 22.6 2.50 1315 N/A N/A N/A N/A

330.0 C 20,10,5 T195C337(2)035AS 6.0 45.0 1.80 1640 N/A N/A N/A N/A

370.0 D 20,10,5 T195D377(2)035AS 9.0 36.3 1.30 2040 N/A N/A N/A N/A 50 Volt Rating at +85°C (30 Volt Rating at +125°C)

33.0 A 20 T195A336M050AS 2.0 12.3 4.95 700 0049 0137 0225 T295A336M050(1)S

33.0 A 10 T195A336K050AS 2.0 12.3 4.95 700 0050 0138 0226 T295A336K050(1)S

120.0 B 20 T195B127M050AS 4.0 22.5 2.49 1200 0051 0139 0227 T295B127M050(1)S

120.0 B 10 T195B127K050AS 4.0 22.5 2.49 1200 0052 0140 0228 T295B127K050(1)S

270.0 C 20 T195C277M050AS 8.0 37.0 1.82 1450 0053 0141 0229 T295C277M050(1)S

270.0 C 10 T195C277K050AS 8.0 37.0 1.82 1450 0054 0142 0230 T295C277K050(1)S

330.0 D 20 T195D337M050AS 9.0 38.0 1.53 1900 0055 0143 0231 T295D337M050(1)S

330.0 D 10 T195D337K050AS 9.0 38.0 1.53 1900 0056 0144 0232 T295D337K050(1)S 60 Volt Rating at +85°C (40 Volt Rating at +125°C)

27.0 A 20 T195A276M060AS 3.0 10.2 5.01 700 0057 0145 0233 T295A276M060(1)S

27.0 A 10 T195A276K060AS 3.0 10.2 5.01 700 0058 0146 0234 T295A276K060(1)S

82.0 B 20,10,5 T195B826(2)060AS 4.0 18.0 2.90 1220 N/A N/A N/A N/A

100.0 B 20 T195B107M060AS 4.0 19.0 2.52 1100 0059 0147 0235 T295B107M060(1)S

100.0 B 10 T195B107K060AS 4.0 19.0 2.52 1100 0060 0148 0236 T295B107K060(1)S

220.0 C 20 T195C227M060AS 8.0 30.0 1.81 1400 0061 0149 0237 T295C227M060(1)S

220.0 C 10 T195C227K060AS 8.0 30.0 1.81 1400 0062 0150 0238 T295C227K060(1)S

270.0 D 20 T195D277M060AS 9.0 27.0 1.33 1850 0063 0151 0239 T295D277M060(1)S

270.0 D 10 T195D277K060AS 9.0 27.0 1.33 1850 0064 0152 0240 T295D277K060(1)S 75 Volt Rating at +85°C (50 Volt Rating at +125°C)

22.0 A 20 T195A226M075AS 3.0 8.5 5.13 600 0065 0153 0241 T295A226M075(1)S

22.0 A 10 T195A226K075AS 3.0 8.5 5.13 600 0066 0154 0242 T295A226K075(1)S

68.0 B 20,10,5 T195B686(2)075AS 4.0 15.4 3.00 1200 N/A N/A N/A N/A

82.0 B 20 T195B826M075AS 4.0 15.2 2.46 1000 0067 0155 0243 T295B826M075(1)S

82.0 B 10 T195B826K075AS 4.0 15.2 2.46 1000 0068 0156 0244 T295B826K075(1)S

180.0 C 20 T195C187M075AS 9.0 37.0 2.23 1300 0069 0157 0245 T295C187M075(1)S

180.0 C 10 T195C187K075AS 9.0 37.0 2.23 1300 0070 0158 0246 T295C187K075(1)S

220.0 D 20 T195D227M075AS 10.0 24.4 1.80 1800 0071 0159 0247 T295D227M075(1)S

220.0 D 10 T195D227K075AS 10.0 24.4 1.80 1800 0072 0160 0248 T295D227K075(1)S 100 Volt Rating at +85°C (65 Volt Rating at +125°C)

10.0 A M T195A106M100AS 3.0 4.5 5.97 800 0073 0161 0249 T295A106M100(1)S

10.0 A K T195A106K100AS 3.0 4.5 5.97 800 0074 0162 0250 T295A106K100(1)S

39.0 B M T195B396M100AS 5.0 10.4 3.54 1300 0075 0163 0251 T295B396M100(1)S

39.0 B K T195B396K100AS 5.0 10.4 3.54 1300 0076 0164 0252 T295B396K100(1)S

68.0 C M T195C686M100AS 10.0 11.3 2.21 1600 0077 0165 0253 T295C686M100(1)S

68.0 C K T195C686K100AS 10.0 11.3 2.21 1600 0078 0166 0254 T295C686K100(1)S

120.0 D M T195D127M100AS 12.0 25.0 2.76 2000 0079 0167 0255 T295D127M100(1)S

120.0 D K T195D127K100AS 12.0 25.0 2.76 2000 0080 0168 0256 T295D127K100(1)S 125 Volt Rating at +85°C (85 Volt Rating at +125°C)

6.8 A M T195A685M125AS 3.0 6.0 11.71 700 0081 0169 0257 T295A685M125(1)S

6.8 A K T195A685K125AS 3.0 6.0 11.71 700 0082 0170 0258 T295A685K125(1)S

27.0 B M T195B276M125AS 5.0 7.2 3.54 1200 0083 0171 0259 T295B276M125(1)S

27.0 B K T195B276K125AS 5.0 7.2 3.54 1200 0084 0172 0260 T295B276K125(1)S

47.0 C M T195C476M125AS 10.0 7.9 2.23 1500 0085 0173 0261 T295C476M125(1)S

47.0 C K T195C476K125AS 10.0 7.9 2.23 1500 0086 0174 0262 T295C476K125(1)S

82.0 D M T195D826M125AS 12.0 17.4 2.82 1900 0087 0175 0263 T295D826M125(1)S

82.0 D K T195D826K125AS 12.0 17.4 2.82 1900 0088 0176 0264 T295D826K125(1)S

T195/T295 (CLR81) Ratings & Part Number Reference

T197 High Temperature Ratings & Part Number Reference

(1) To complete KEMET part number, insert capacitance tolerance: K = ±10%, M = ±20% and J = ±5%.

Wet Tantalum T197 Series

CapμFCase

Size

Cap

Tolerance

KEMET

Part Number

Max. D.C.

Leakage

μA + 25°C

Max. D.F.

% @ 25°C

120 Hz

Max. ESR Ohms at

+25°C

120 Hz

Max. Ripple

Current

mArms at

85°C 40 kHz

6 Volt Rating at +85°C (3 Volt Rating at +200°C)

30.0 A 20, 10, 5 T197A306(1)006AS 1.0 9.0 3.98 820

68.0 A 20, 10, 5 T197A686(1)006AS 1.0 15.0 2.93 960

140.0 B 20, 10, 5 T197B147(1)006AS 1.0 21.0 1.99 1200

270.0 B 20, 10, 5 T197B277(1)006AS 1.0 45.0 2.21 1375

330.0 C 20, 10, 5 T197C337(1)006AS 2.0 36.0 1.45 1800

560.0 C 20, 10, 5 T197C567(1)006AS 2.0 55.0 1.30 1900

1000.0 D 20, 10, 5 T197D108(1)006AS 3.0 72.0 0.95 2390

1200.0 D 20, 10 T197D128(1)006AS 3.0 90.0 1.00 2265

8 Volt Rating at +85°C (4 Volt Rating at +200°C)

25.0 A 20, 10, 5 T197A256(1)008AS 1.0 7.5 3.98 820

56.0 A 20, 10, 5 T197A566(1)008AS 1.0 14.0 3.32 900

120.0 B 20, 10, 5 T197B127(1)008AS 1.0 20.0 2.21 1230

220.0 B 20, 10, 5 T197B227(1)008AS 1.0 40.0 2.41 1370

290.0 C 20, 10, 5 T197C297(1)008AS 2.0 34.0 1.56 1770

430.0 C 20, 10, 5 T197C437(1)008AS 2.0 46.0 1.42 1825

850.0 D 20, 10 T197D857(1)008AS 4.0 60.0 0.94 2330

10 Volt Rating at +85°C (5 Volt Rating at +200°C)

20.0 A 20, 10, 5 T197A206(1)010AS 1.0 6.0 3.98 820

47.0 A 20, 10, 5 T197A476(1)010AS 1.0 13.0 3.67 855

100.0 B 20, 10, 5 T197B107(1)010AS 1.0 15.0 1.99 1200

150.0 B 20, 10, 5 T197B157(1)010AS 1.0 30.0 2.65 1270

180.0 B 20, 10, 5 T197B187(1)010AS 1.0 30.0 2.21 1365

250.0 C 20, 10, 5 T197C257(1)010AS 2.0 30.0 1.59 1720

390.0 C 20, 10, 5 T197C397(1)010AS 2.0 44.0 1.50 1800

470.0 C 20, 10, 5 T197C477(1)010AS 2.0 44.0 1.24 1800

680.0 D 20, 10, 5 T197D687(1)010AS 4.0 46.0 0.90 2490

750.0 D 20, 10 T197D757(1)010AS 4.0 50.0 0.88 2360

820.0 D 20, 10 T197D827(1)010AS 4.0 57.0 0.92 2360

15 Volt Rating at +85°C (7.5 Volt Rating at +200°C)

15.0 A 20, 10, 5 T197A156(1)015AS 1.0 5.0 4.42 780

33.0 A 20, 10, 5 T197A336(1)015AS 1.0 10.0 4.02 820

70.0 B 20, 10, 5 T197B706(1)015AS 1.0 13.0 2.46 1150

120.0 B 20, 10, 5 T197B127(1)015AS 1.0 25.0 2.76 1450

170.0 C 20, 10, 5 T197C177(1)015AS 2.0 25.0 1.95 1480

270.0 C 20, 10, 5 T197C277(1)015AS 2.0 43.0 2.11 1740

470.0 D 20, 10, 5 T197D477(1)015AS 6.0 37.0 1.04 2100

540.0 D 20, 10 T197D547(1)015AS 6.0 40.0 0.98 2330

560.0 D 20, 10 T197D567(1)015AS 6.0 40.0 0.98 2330

25 Volt Rating at +85°C (12.5 Volt Rating at +200°C)

10.0 A 20, 10, 5 T197A106(1)025AS 1.0 4.0 5.31 715

22.0 A 20, 10, 5 T197A226(1)025AS 1.0 7.0 4.22 800

27.0 A 20, 10, 5 T197A276(1)025AS 1.5 11.0 5.40 715

50.0 B 20, 10, 5 T197B506(1)025AS 1.0 11.0 2.92 1130

100.0 B 20, 10, 5 T197B107(1)025AS 1.0 21.0 2.78 1435

120.0 B 20, 10, 5 T197B127(1)025AS 2.0 25.0 2.76 1450

180.0 C 20, 10, 5 T197C187(1)025AS 2.0 28.0 2.06 1525

220.0 C 20, 10, 5 T197C227(1)025AS 2.0 35.0 2.11 1615

330.0 D 20, 10, 5 T197D337(1)025AS 7.0 30.0 1.21 1860

350.0 D 20, 10 T197D357(1)025AS 7.0 35.0 1.33 1970

390.0 D 20, 10 T197D397(1)025AS 7.0 35.0 1.19 2025

30 Volt Rating at +85°C (15 Volt Rating at +200°C)

8.0 A 20, 10, 5 T197A805(1)030AS 1.0 4.0 6.64 640

15.0 A 20, 10, 5 T197A156(1)030AS 1.0 5.0 4.42 780

40.0 B 20, 10, 5 T197B406(1)030AS 1.0 10.0 3.32 1120

68.0 B 20, 10, 5 T197B686(1)030AS 1.0 13.0 2.54 1285

100.0 C 20, 10, 5 T197C107(1)030AS 2.0 17.0 2.26 1450

150.0 C 20, 10, 5 T197C157(1)030AS 2.0 23.0 2.03 1525

300.0 D 20, 10 T197D307(1)030AS 8.0 31.0 1.37 1950

Wet Tantalum T197 Series

T197 High Temperature Ratings & Part Number Reference

(1) To complete KEMET part number, insert capacitance tolerance: K = ±10%, M = ±20% and J = ±5%.

CapμFCase

Size

Cap

Tolerance

KEMET

Part Number

Max. D.C.

Leakage

μA + 25°C

Max. D.F.

% @ 25°C

120 Hz

Max. ESR

Ohms at

+25°C

120 Hz

Max. Ripple

Current

mArms at

85°C 40 kHz

35 Volt Rating at +85°C (17.5 Volt Rating at +200°C)

15.0 A 20, 10 T197A156(1)035AS 1.0 7.0 6.19 660

68.0 B 20, 10 T197B686(1)035AS 1.0 15.0 2.93 1285

150.0 C 20, 10 T197C157(1)035AS 2.0 23.0 2.03 1525

220.0 D 20, 10 T197D227(1)035AS 3.0 23.0 1.39 1900

390.0 D 20, 10 T197D397(1)035AS 8.0 43.0 1.46 1900

50 Volt Rating at +85°C (25 Volt Rating at +200°C)

5.0 A 20, 10, 5 T197A505(1)050AS 1.0 3.0 7.96 580

10.0 A 20, 10, 5 T197A106(1)050AS 1.0 4.0 5.31 715

25.0 B 20, 10, 5 T197B256(1)050AS 1.0 8.0 4.25 1005

47.0 B 20, 10, 5 T197B476(1)050AS 1.0 13.0 3.67 1155

60.0 C 20, 10, 5 T197C606(1)050AS 2.0 12.0 2.65 1335

82.0 C 20, 10, 5 T197C826(1)050AS 2.0 15.0 2.43 1400

160.0 D 20, 10 T197D167(1)050AS 8.0 17.0 1.41 1900

60 Volt Rating at +85°C (30 Volt Rating at +200°C)

4.0 A 20, 10, 5 T197A405(1)060AS 1.0 2.8 9.29 525

8.2 A 20, 10, 5 T197A825(1)060AS 1.0 4.0 6.47 625

10.0 A 20, 10, 5 T197A106(1)060AS 1.0 4.0 5.30 570

20.0 B 20, 10, 5 T197B206(1)060AS 1.0 7.0 4.64 930

39.0 B 20, 10, 5 T197B396(1)060AS 1.0 12.0 4.08 1110

50.0 C 20, 10, 5 T197C506(1)060AS 2.0 10.0 2.65 1330

68.0 C 20, 10, 5 T197C686(1)060AS 2.0 13.0 2.54 1365

100.0 C 20, 10, 5 T197C107(1)060AS 2.0 18.0 2.39 1420

140.0 D 20, 10 T197D147(1)060AS 8.0 16.0 1.52 1850

150.0 D 20, 10 T197D157(1)060AS 6.0 17.0 1.50 1865

75 Volt Rating at +85°C (37.5 Volt Rating at +200°C)

3.5 A 20, 10, 5 T197A355(1)075AS 1.0 2.5 9.48 525

6.8 A 20, 10, 5 T197A685(1)075AS 1.0 3.5 6.83 610

15.0 B 20, 10, 5 T197B156(1)075AS 1.0 6.0 5.31 890

33.0 B 20, 10, 5 T197B336(1)075AS 1.0 10.0 4.02 1000

40.0 C 20, 10, 5 T197C406(1)075AS 2.0 9.0 2.99 1250

56.0 C 20, 10, 5 T197C566(1)075AS 2.0 11.0 2.61 1335

68.0 C 20, 10, 5 T197C686(1)075AS 2.0 13.0 2.54 1520

110.0 D 20, 10 T197D117(1)075AS 9.0 12.0 1.45 1850

120.0 D 20, 10 T197D127(1)075AS 9.0 12.0 1.33 1915

100 Volt Rating at +85°C (50 Volt Rating at +200°C)

2.5 A 20, 10, 5 T197A255(1)100AS 1.0 2.0 10.62 505

4.7 A 20, 10, 5 T197A475(1)100AS 1.0 3.0 8.47 565

11.0 B 20, 10, 5 T197B116(1)100AS 1.0 5.0 6.03 835

22.0 B 20, 10, 5 T197B226(1)100AS 1.0 8.0 4.82 965

30.0 C 20, 10, 5 T197C306(1)100AS 2.0 7.0 3.10 1240

43.0 C 20, 10, 5 T197C436(1)100AS 2.0 8.5 2.62 1335

86.0 D 20, 10 T197D866(1)100AS 9.0 10.0 1.54 1800

125 Volt Rating at +85°C (62.5 Volt Rating at +200°C)

1.7 A 20, 10, 5 T197A175(1)125AS 1.0 2.0 15.61 415

2.7 A 20, 10, 5 T197A275(1)125AS 1.0 3.0 14.73 450

3.6 A 20, 10, 5 T197A365(1)125AS 1.0 3.0 11.05 520

9.0 B 20, 10, 5 T197B905(1)125AS 1.0 5.0 7.37 755

14.0 B 20, 10, 5 T197B146(1)125AS 1.0 6.0 5.69 860

18.0 C 20, 10, 5 T197C186(1)125AS 2.0 5.0 3.69 1130

25.0 C 20, 10, 5 T197C256(1)125AS 2.0 6.0 3.18 1200

56.0 D 20, 10 T197D566(1)125AS 10.0 6.5 1.54 1800

Max. ESR Max. Ripple

Max. D.C Max. D.F. Ohms at Current

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz

6 Volt Rating at +85°C (3 Volt Rating at +200°C)

220.0 A 20, 10 T198A227(1)006AS 2.0 50.0 3.02 1000

470.0 B 20, 10 T198B477(1)006AS 2.0 90.0 2.54 1280

820.0 B 20, 10 T198B827(1)006AS 3.0 155.0 2.51 1500

1500.0 C 20, 10 T198C158(1)006AS 5.0 172.0 1.52 1900

2200.0 D 20, 10 T198D228(1)006AS 6.0 170.0 1.03 2300

8 Volt Rating at +85°C (4 Volt Rating at +200C)

180.0 A 20, 10 T198A187(1)008AS 2.0 41.0 3.02 1000

680.0 B 20, 10 T198B687(1)008AS 3.0 130.0 2.54 1500

1500.0 C 20, 10 T198C158(1)008AS 5.0 170.0 1.50 1900

1800.0 D 20, 10 T198D188(1)008AS 7.0 138.0 1.02 2300

10 Volt Rating at +85°C (5 Volt Rating at +200°C)

120.0 A 20, 10 T198A127(1)010AS 2.0 29.0 3.2 900

150.0 A 20, 10 T198A157(1)010AS 2.0 34.0 3.01 900

560.0 B 20, 10 T198B567(1)010AS 3.0 106.0 2.51 1450

1000.0 C 20, 10 T198C108(1)010AS 4.0 92.0 1.22 1720

1200.0 C 20, 10 T198C128(1)010AS 5.0 137.0 1.51 1850

1500.0 D 20, 10 T198D158(1)010AS 7.0 114.0 1.01 2300

15 Volt Rating at +85°C (7.5 Volt Rating at +200°C)

100.0 A 20, 10 T198A107(1)015AS 2.0 30.0 3.98 900

390.0 B 20, 10 T198B397(1)015AS 3.0 74.0 2.52 1450

820.0 C 20, 10 T198C827(1)015AS 6.0 111.0 1.80 1800

1000.0 D 20, 10 T198D108(1)015AS 8.0 92.0 1.22 2300

25 Volt Rating at +85°C (12.5 Volt Rating at +200°C)

68.0 A 20, 10 T198A686(1)025AS 2.0 22.0 4.29 850

180.0 B 20, 10 T198B187(1)025AS 3.0 35.0 2.58 1130

270.0 B 20, 10 T198B277(1)025AS 3.0 55.0 2.70 1400

390.0 C 20,10 T198C397(1)025AS 7.0 48.0 1.63 1400

470.0 C 20, 10 T198C477(1)025AS 7.0 48.0 1.35 1400

560.0 C 20, 10 T198C567(1)025AS 7.0 76.0 1.80 1750

680.0 D 20, 10 T198D687(1)025AS 8.0 63.0 1.23 2100

30 Volt Rating at +85°C (15 Volt Rating at +200°C)

56.0 A 20, 10 T198A566(1)030AS 2.0 22.0 5.21 800

220.0 B 20, 10 T198B227(1)030AS 3.0 42.0 2.53 1200

470.0 C 20, 10 T198C477(1)030AS 8.0 64.0 1.81 1500

560.0 D 20, 10 T198D567(1)030AS 9.0 55.0 1.30 2000

35 Volt Rating at +85°C (17.5 Volt Rating at 200°C)

39.0 A 20, 10 T198A396(1)035AS 2.0 12.0 4.10 820

270.0 C 20, 10 T198A277(1)035AS 7.0 37.0 1.82 1373

50 Volt Rating at +85°C (25 Volt Rating at +200°C)

33.0 A 20, 10 T198A336(1)050AS 2.0 12.3 4.95 700

120.0 B 20, 10 T198B127(1)050AS 4.0 22.5 2.49 1200

270.0 C 20, 10 T198C277(1)050AS 8.0 37.0 1.82 1450

330.0 D 20, 10 T198D337(1)050AS 9.0 38.0 1.53 1900

T198 High Temperature Ratings & Part Number Reference

(1) To complete KEMET part number, insert capacitance tolerance: K = ±10%, M = ±20% and J = ±5%.

Wet Tantalum T198 Series

(1) To complete KEMET part number, insert capacitance tolerance: K = ±10%, M = ±20% and J = ±5%.

Max. ESR Max. Ripple

Max. D.C Max. D.F. Ohms at Current

Cap Case Cap KEMET Part Leakage @ 25°C +25°C mArms at

μF Size Tol. Number μA +25°C 120 Hz 120 Hz 85°C 40 kHz

60 Volt Rating at +85°C (30 Volt Rating at +200°C)

12.0 A 20, 10 T198A126(1)060AS 3.0 7.0 7.74 700

15.0 A 20, 10 T198A156(1)060AS 3.0 8.0 7.10 700

27.0 A 20, 10 T198A276(1)060AS 3.0 10.2 5.00 700

47.0 B 20, 10 T198B476(1)060AS 4.0 13.0 3.67 1150

56.0 B 20, 10 T198B566(1)060AS 4.0 18.0 4.26 1150

82.0 B 20, 10 T198B826(1)060AS 4.0 22.0 3.56 1150

100.0 B 20, 10 T198B107(1)060AS 4.0 19.0 2.52 1100

120.0 C 20, 10 T198C127(1)060AS 8.0 20.0 2.21 1420

220.0 C 20, 10 T198C227(1)060AS 8.0 37.0 2.23 1400

270.0 D 20, 10 T198D277(1)060AS 9.0 27.0 1.33 1850

330.0 D 20, 10 T198D337(1)060AS 10.0 32.0 1.29 1850

75 Volt Rating at +85°C (37.5 Volt Rating at +200°C)

8.2 A 20, 10 T198A825(1)075AS 3.0 6.0 9.70 610

22.0 A 20, 10 T198A226(1)075AS 3.0 8.5 5.13 600

47.0 B 20, 10 T198B476(1)075AS 4.0 15.0 4.23 1050

68.0 B 20, 10 T198B686(1)075AS 4.0 21.0 4.10 1050

82.0 B 20, 10 T198B826(1)075AS 4.0 15.2 2.46 1000

100.0 C 20, 10 T198C107(1)075AS 8.0 19.0 2.52 1335

110.0 B 20, 10 T198B117(1)075AS 2.0 11.0 1.33 1650

150.0 C 20, 10 T198C157(1)075AS 9.0 25.0 2.21 1335

180.0 C 20, 10 T198C187(1)075AS 9.0 28.0 2.06 1300

220.0 D 20, 10 T198D227(1)075AS 10.0 37.0 2.23 1800

100 Volt Rating at +85°C (50 Volt Rating at +200°C)

5.6 A 20, 10 T198A565(1)100AS 2.0 6.0 14.21 530

10.0 A 20, 10 T198A106(1)100AS 3.0 4.5 5.97 800

33.0 B 20, 10 T198B336(1)100AS 3.0 14.0 5.63 1065

39.0 B 20, 10 T198B396(1)100AS 5.0 10.4 3.54 1300

47.0 C 20, 10 T198C476(1)100AS 4.0 9.0 2.54 1335

56.0 C 20, 10 T198C566(1)100AS 8.0 11.0 2.21 1600

68.0 C 20, 10 T198C686(1)100AS 10.0 15.0 2.93 1600

120.0 D 20, 10 T198D127(1)100AS 12.0 25.0 2.76 2000

220.0 D 20, 10 T198D227(1)100AS 12.0 30.0 1.81 2000

125 Volt Rating at +85°C (62.5 Volt Rating at 200°C)

5.6 A 20, 10 T198A565(1)125AS 3.0 6.0 14.21 530

6.8 A 20, 10 T198A685(1)125AS 3.0 6.0 11.71 700

18.0 B 20, 10 T198B186(1)125AS 3.0 8.0 5.89 1065

27.0 B 20, 10 T198B276(1)125AS 5.0 7.2 3.54 1200

39.0 C 20, 10 T198C396(1)125AS 8.0 8.0 2.72 1280

47.0 C 20, 10 T198C476(1)125AS 10.0 9.0 2.54 1500

68.0 D 20, 10 T198D686(1)125AS 12.0 8.0 1.56 1860

82.0 D 20, 10 T198D826(1)125AS 12.0 17.4 2.82 1900

T198 High Temperature Ratings & Part Number Reference

World Sales Headquarters

KEMET Electronics Corporation

P.O. Box 5928

Greenville, SC 29606

Phone: 864-963-6300

Europe

KEMET Electronics S.A.

1-3, Avenue de la Paix

P.O.B. 76

CH-1211 Geneva 20,

Switzerland

Phone: 41-22-715-0100

Asia

KEMET Electronics Marketing PTE Ltd.

101 Thomson road, #23-03

United Square

Singapore, 307591, Singapore

Phone: 65-6353-6636

KEMET Electronics Asia Ltd.

30 Canton Road, Room 1512

SilverCord Tower II

Tsimshatshui, Kowloon

Hong Kong

Phone: 852-2305-1168

KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET capacitors in potential circuit designs.

KEMET F3103B User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual