CERAMIC
LEADED CAPACITORS
To find parts fast, visit CapacitorEdge smat www.kemet.com.
F-3101D 7/00
CAPACITORS
GR900 and MIL-PRF-123 High-Reliability Ceramic Capacitors are available.
Refer to catalog F-3054 for detailed information. KEMET also manufactures
Tantalum Leaded, and Surface Mount Capacitors — Tantalum and Ceramic.
Refer to catalog F-3100 — Tantalum Leaded, and F3102 — Surface Mount
for detailed information on these products.
INDEX
KEMET
Multilayer Ceramic Capacitors/Axial & Radial Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Conformally Coated/Axial & Radial
Performance Characteristics
General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
“Aximax” Conformally Coated Axial
Outline Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Part Number Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
“Golden Max” Conformally Coated Radial
Outline Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Part Number Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 - 11
Optional Lead Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Ceramic Molded/Axial & Radial
Performance Characteristics
General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Ceramic Molded Standard/Axial & Radial
Outline Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Part Number Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 - 19
Mil-PRF-20
Outline Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Part Number Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 - 25
Mil-C-11015 (CK) & Mil-PRF-39014 (CKR)
Outline Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Part Number Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 31
Ceramic Axial Tape & Reel Packaging Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Ceramic Radial Tape & Reel Packaging Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Ceramic Leaded Packaging Quantities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Application Notes for Multilayer Ceramic Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 - 39
®
NOTICE
Although the information in this catalog has been carefully
checked for accuracy, and is believed to be correct and
current, no warranty, either express or implied, is made as to
either its applicability to, or its compatibility with, specific
requirements; nor does KEMET Electronics Corporation
assume any responsibility for correctness of this
information, nor for damages consequent to its use. All
design characteristics, specifications, tolerances, and the
like are subject to change without notice.
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 3
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
Multilayer ceramic capacitors are available in a
variety of physical sizes and configurations, including
leaded devices and surface mounted chips. Leaded
styles include molded and conformally coated parts
with axial and radial leads. However, the basic
capacitor element is similar for all styles. It is called a
chip and consists of formulated dielectric materials
which have been cast into thin layers, interspersed
with metal electrodes alternately exposed on opposite
TEMPERATURE CHARACTERISTICS
Ceramic dielectric materials can be formulated with
a wide range of characteristics. The EIA standard for
ceramic dielectric capacitors (RS-198) divides ceramic
dielectrics into the following classes:
Class I: Temperature compensating capacitors,
suitable for resonant circuit application or other applications where high Q and stability of capacitance characteristics are required. Class I capacitors have
predictable temperature coefficients and are not
affected by voltage, frequency or time. They are made
from materials which are not ferro-electric, yielding
superior stability but low volumetric efficiency. Class I
capacitors are the most stable type available, but have
the lowest volumetric efficiency.
Class II: Stable capacitors, suitable for bypass
or coupling applications or frequency discriminating
circuits where Q and stability of capacitance characteristics are not of a major importance. Class II
capacitors have temperature characteristics of ± 15%
or less. They are made from materials which are
ferro-electric, yielding higher volumetric efficiency but
less stability. Class II capacitors are affected by
temperature, voltage, frequency and time.
edges of the laminated structure.
The entire structure is
fired at high temperature to produce a monolithic
block
which provides high capacitance values in a
small physical volume. After firing, conductive
terminations are applied to opposite ends of the chip to
make contact with the exposed electrodes.
Termination materials and methods vary depending on
the intended use.
Class III: General purpose capacitors, suitable
for by-pass coupling or other applications in which
dielectric losses, high insulation resistance and
stability of capacitance characteristics are of little or
no importance. Class III capacitors are similar to Class
II capacitors except for temperature characteristics,
which are greater than ± 15%. Class III capacitors
have the highest vol
umetric efficiency and poorest
stability of any type.
KEMET leaded ceramic capacitors are offered in
the three most popular temperature characteristics:
C0G: Class I, with a temperature coefficient of 0 ±
30 ppm per degree C over an operating
temperature range of - 55°C to + 125°C (Also
known as “NP0”).
X7R: Class II, with a maximum capacitance
change of ± 15% over an operating temperature
range of - 55°C to + 125°C.
Z5U: Class III, with a maximum capacitance
change of + 22% - 56% over an operating tem-
perature range of + 10°C to + 85°C.
Specified electrical limits for these three temperature
characteristics are shown in Table 1.
Dissipation Factor: Measured at following conditions:
C0G — 1 kHz and 1 vrms if capacitance > 1000 pF
X7R — 1 kHz and 1 vrms*
Z5U — 1 kHz and 0.5 vrms
Dielectric Strength: 2.5 times rated DC voltage. Pass Subsequent IR Test
Insulation Resistance (IR): At rated DC voltage, 1,000 MΩ -µF 1,000 MΩ -µF 1,000 MΩ -µF
Temperature Characteristics: Range, °C -55 to 125 -55 to 125 +10 to 85
* 1 MHz and 1 vrms if capacitance ≤ 100 pF on military product.
SPECIFIED ELECTRICAL LIMITS
TEMPERATURE CHARACTERISTICS
PARAMETER C0G X7R Z5U
1 MHz and 1 vrms if capacitance ≤ 1000 pF 0.15% 2.5% 4.0%
whichever of the two is smaller or 100 GΩ or 100 GΩ or 10 GΩ
Capacitance Change without 0 ± 30 ppm/°C ±15% +22%, -56%
DC voltage
Table I
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 4
CERAMIC CONFORMALLY COATED/AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS
®
KEMET
GENERAL SPECIFICATIONS
Working Voltage: Axial Radial
C0G 50 & 100 volts 100 & 200 volts
X7R 50 & 100 volts 50, 100 & 200 volts
Z5U 50 & 100 volts 50 & 100 volts
Temperature Characteristics:
C0G 0 ± 30 PPM/°C from - 55°C to + 125°C
X7R ± 15% from - 55°C to + 125°C
Z5U + 22%; - 56% from + 10°C to + 85°C
Capacitance Tolerance:
C0G ± 5%, ± 10%, ± 20%
X7R ± 10%, ± 20%
Z5U ± 20%, - 20 + 80%, - 0 + 100%
Construction:
Epoxy encapsulated - meets flame test require-
ments of UL Standard 94V-0.
High-temperature solder - meets EIA RS-198D,
Method 302, Condition B (260°C for 10 sec.)
Lead Material:
Solder Coated Copper Clad Steel
Solderability:
EIA RS-198D, Method 302, Solder temperature 230° ± 5°C. Dwell time in solder - 7 ± 1/2 seconds.
Terminal Strength:
EIA RS-198D, Method 303, Condition A (2.2 kg)
ELECTRICAL @ 25°C
Capacitance:
Within specified tolerance at 25°C and following
test conditions.
C0G - Greater than 1000 pF with 1.0 vrms at 1 kHz.
- 1000 pF and less with 1.0 vrms at 1 MHz.
X7R - with 1.0 vrms at 1 kHz.
Z5U - with 0.5 vrms at 1 kHz.
Dissipation Factor:
At 25°C - same test conditions as capacitance.
C0G - 0.15% maximum
X7R - 2.5% maximum
Z5U - 4.0% maximum
Insulation Resistance:
EIA RS-198D, Method 104, Condition A
C0G - 100 gigohms or 1000 megohm x µF,
whichever is less.
X7R -100 gigohms or 1000 megohm x µF,
whichever is less.
Z5U -10 gigohms or 1000 megohm x µF,
whichever is less.
Dielectric Withstanding Voltage:
EIA RS-198D, Method 103 (250% of rated voltage
for 5 seconds, with current limited to 50mA)
ENVIRONMENTAL
Vibration:
EIA RS-198D, Method 304, Condition D (10-2000
Hz; 20g)
Shock:
EIA RS-198D, Method 305, Condition I (100g)
Life Test:
EIA RS-198D, Method 201, Condition D. Test
Potential and Temperature.
C0G- 200% of rated voltage at + 125°C
X7R - 200% of rated voltage at + 125°C
(1)
Z5U - 200% of rated voltage at + 85°C
Post-Test Limits at + 25°C are:
Capacitance Change:
C0G - ± 3%, or 0.25 pF, whichever is greater.
X7R - ± 20% of initial value.
Z5U - ± 30% of initial value.
(2)
(2)
Dissipation Factor:
C0G - 0.25% maximum
X7R - 3.0% maximum
Z5U - 4.0% maximum
Insulation Resistance:
C0G- 10 gigohms or 100 megohm x µF,
whichever is less.
X7R - 10 gigohms or 100 megohm x µF,
whichever is less.
Z5U - 1 gigohm or 100 megohm x µF,
whichever is less.
Moisture Resistance:
EIA RS-198D, Method 204, Condition A (10 cycles
without applied voltage.
Post-Test Limits at + 25°C are:
Capacitance Change:
C0G - 3%, or 0.25 pF, whichever is greater.
X7R - ± 20% of initial value.
Z5U - ± 30% of initial value.
(2)
(2)
Dissipation Factor:
C0G - 0.25% maximum
X7R - 3.0% maximum
Z5U - 4.0% maximum
Insulation Resistance:
C0G- 10 gigohms or 100 megohm x µF,
whichever is less.
X7R - 10 gigohms or 100 megohm x µF,
whichever is less.
Z5U - 1 gigohm or 100 megohm x µF,
whichever is less.
Thermal Shock:
EIA RS-198D, Method 202, Condition B (C0G &
X7R: - 55°C to + 125°C; Z5U: - 55°C to + 85°C)
(1) +53 ppm -30 ppm/°C from + 25°C to - 55°C, ± 60
ppm below 10 pF.
(2) X7R & Z5U dielectrics exhibit aging characteristics;
therefore, it is highly recommended that capacitors
be deaged for 2 hours at 150°C and stabilized at
room temperature for 48 hours before capacitance
measurements are made.
Axial/Radial
Conformally Coated
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 5
CERAMIC CONFORMALLY COATED/AXIAL
M
104
410
C
5
C
A
U
5
C
CERAMIC
CASE SIZE
(See Table of Dimensions above)
SPECIFICATION
C — Standard
CAPACITANCE
Expressed in Picofarad Code (pF)
First Two Digits — Significant Figures
Third Digit — Number of Zeros
FAILURE RA TE
INTERNAL CONSTRUCTION
CAPACITANCE TOLERANCE
J — ± 5%
K— ± 10%
M— ± 20%
Z — –20 +80%
A — Not Applicable
LEAD MA TERIAL
C — Standard
5 — Standard
DIELECTRIC
EIA Designation
G — C0G (NPO) — Ultra-Stable
R — X7R — Stable
U — Z5U — General Purpose
RATED VOLTAGE
1 — 100 Volts
5 — 50 Volts
*
*Part Number Example: C410C104M5U5CA (14 digits – no spaces)
K5R
104K
AB
0037
Manufacturer
(KEMET)
Rated Voltage
5 - 50 volts
1 - 100 volts
Dielectric
G – C0G/NP0
R – X7R
U – Z5U
Capacitance
Tolerance
Capacitance
Code
Lot
Code
Date
Code
“AXIMAX”
CAPACITANCE OUTLINE DRAWING
MAXIMUM DIMENSIONS—INCHES & (MILLIMETERS)
STYLE L D LL
C410 .170 (4.32) .100 (2.54) .020 (.51) 1.0 (25.4)
C412 .170 (4.32) .120 (3.05) .020 (.51) 1.0 (25.4)
C420 .260 (6.60) .100 (2.54) .020 (.51) 1.0 (25.4)
C430 .290 (7.37) .150 (3.81) .020 (.51) 1.0 (25.4)
C440 .400 (10.16) .150 (3.81) .020 (.51) 1.0 (25.4)
MAX MAX MIN
LD
+.001, -.003
(+.025, -.076)
ORDERING INFORMATION
MARKING INFORMATION
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 6
CERAMIC CONFORMALLY COATED/AXIAL
RATINGS & PART NUMBER REFERENCE
ULTRA-STABLE
TEMPERATURE
CHARACTERISTIC—C0G/NP0
CAPACITANCE
pF PART NUMBER
100 VOLT - C0G
10 C410C100(1
12 C410C120(1)1G5CA
15 C410C150(1)1G5CA
18 C410C180(1)1G5CA
22 C410C220(1)1G5CA
27 C410C270(1)1G5CA
33 C410C330(1)1G5CA
39 C410C390(1)1G5CA
47 C410C470(1)1G5CA
56 C410C560(1)1G5CA
68 C410C680(1)1G5CA
82 C410C820(1)1G5CA
100 C410C101(1)1G5CA
120 C410C121(1)1G5CA
150 C410C151(1)1G5CA
180 C410C181(1)1G5CA
220 C410C221(1)1G5CA
270 C410C271(1)1G5CA
330 C410C331(1)1G5CA
390 C410C391(1)1G5CA
470 C410C471(1)1G5CA
560 C410C561(1)1G5CA
680 C410C681(1)1G5CA
820 C410C821(1)1G5CA
1,000 C410C102(1)1G5CA
1,200 C420C122(1)1G5CA
1,500 C420C152(1)1G5CA
1,800 C420C182(1)1G5CA
2,200 C420C222(1)1G5CA
2,700 C430C272(1)1G5CA
3,300 C430C332(1)1G5CA
3,900 C430C392(1)1G5CA
4,700 C430C472(1)1G5CA
5,600 C430C562(1)1G5CA
6,800 C430C682(1)1G5CA
8,200 C430C822(1)1G5CA
10,000 C440C103(1)1G5CA
12,000 C440C123(1)1G5CA
15,000 C440C153(1)1G5CA
50 VOLT - C0G
560 C410C561(1
680 C410C681(1)5G5CA
820 C410C821(1)5G5CA
1,000 C410C102(1)5G5CA
1,200 C412C122(1)5G5CA
1,500 C412C152(1)5G5CA
1,800 C412C182(1)5G5CA
2,200 C412C222(1)5G5CA
2,700 C412C272(1)5G5CA
1,200 C420C122(1)5G5CA
1,500 C420C152(1)5G5CA
1,800 C420C182(1)5G5CA
2,200 C420C222(1)5G5CA
2,700 C430C272(1)5G5CA
3,300 C430C332(1)5G5CA
3,900 C430C392(1)5G5CA
4,700 C430C472(1)5G5CA
5,600 C430C562(1)5G5CA
6,800 C430C682(1)5G5CA
8,200 C430C822(1)5G5CA
10,000 C440C103(1)5G5CA
12,000 C440C123(1)5G5CA
15,000 C440C153(1)5G5CA
(1) Insert proper letter for capacitance tolerance desired:
J = ±5%
K = ±10%
M = ±20%
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 7
KEMET
)1G5CA
)5G5CA
For packaging information, see pages 32 and 34.
“AXIMAX”
SINGLE
TEMPERATURE
CHARACTERISTIC—X7R
CAPACITANCE
pF PART NUMBER
100 VOLT - X7R
470 C410C471(1
560 C410C561(1)1R5CA
680 C410C681(1)1R5CA
820 C410C821(1)1R5CA
1,000 C410C102(1)1R5CA
1,200 C410C122(1)1R5CA
1,500 C410C152(1)1R5CA
1,800 C410C182(1)1R5CA
2,200 C410C222(1)1R5CA
2,700 C410C272(1)1R5CA
3,300 C410C332(1)1R5CA
3,900 C410C392(1)1R5CA
4,700 C410C472(1)1R5CA
5,600 C410C562(1)1R5CA
6,800 C410C682(1)1R5CA
8,200 C410C822(1)1R5CA
10,000 C410C103(1)1R5CA
12,000 C410C123(1)1R5CA
15,000 C412C153(1)1R5CA
18,000 C412C183(1)1R5CA
22,000 C412C223(1)1R5CA
27,000 C412C273(1)1R5CA
15,000 C420C153(1)1R5CA
18,000 C420C183(1)1R5CA
22,000 C420C223(1)1R5CA
27,000 C420C273(1)1R5CA
33,000 C420C333(1)1R5CA
39,000 C430C393(1)1R5CA
47,000 C430C473(1)1R5CA
56,000 C430C563(1)1R5CA
68,000 C430C683(1)1R5CA
82,000 C430C823(1)1R5CA
100,000 C430C104(1)1R5CA
120,000 C440C124(1)1R5CA
150,000 C440C154(1)1R5CA
50 VOLT - X7R
8,200 C410C822(1
10,000 C410C103(1)5R5CA
12,000 C410C123(1)5R5CA
15,000 C410C153(1)5R5CA
18,000 C410C183(1)5R5CA
22,000 C410C223(1)5R5CA
27,000 C410C273(1)5R5CA
33,000 C410C333(1)5R5CA
39,000 C410C393(1)5R5CA
47,000 C410C473(1)5R5CA
56,000 C412C563(1)5R5CA
68,000 C412C683(1)5R5CA
82,000 C412C823(1)5R5CA
100,000 C412C104(1)5R5CA
56,000 C420C563(1)5R5CA
68,000 C420C683(1)5R5CA
82,000 C420C823(1)5R5CA
100,000 C420C104(1)5R5CA
120,000 C430C124(1)5R5CA
150,000 C430C154(1)5R5CA
180,000 C430C184(1)5R5CA
220,000 C430C224(1)5R5CA
270,000 C430C274(1)5R5CA
330,000 C440C334(1)5R5CA
390,000 C440C394(1)5R5CA
470,000 C440C474(1)5R5CA
(1) Insert proper letter for capacitance tolerance desired:
K = ±10%, M = ±20%
KEMET
)1R5CA
)5R5CA
KEMET
GENERAL PURPOSE
TEMPERATURE
CHARACTERISTIC—Z5U
CAPACITANCE
pF PART NUMBER
100 VOLT - Z5U
10,000 C410C103(1
12,000 C410C123(1)1U5CA
15,000 C410C153(1)1U5CA
18,000 C410C183(1)1U5CA
22,000 C410C223(1)1U5CA
27,000 C420C273(1)1U5CA
33,000 C420C333(1)1U5CA
39,000 C420C393(1)1U5CA
47,000 C420C473(1)1U5CA
56,000 C430C563(1)1U5CA
68,000 C430C683(1)1U5CA
82,000 C430C823(1)1U5CA
100,000 C430C104(1)1U5CA
120,000 C430C124(1)1U5CA
150,000 C430C154(1)1U5CA
180,000 C440C184(1)1U5CA
220,000 C440C224(1)1U5CA
50 VOLT - Z5U
27,000 C410C273(1
33,000 C410C333(1)5U5CA
39,000 C410C393(1)5U5CA
47,000 C410C473(1)5U5CA
56,000 C410C563(1)5U5CA
68,000 C410C683(1)5U5CA
82,000 C410C823(1)5U5CA
100,000 C410C104(1)5U5CA
120,000 C410C124(1)5U5CA
150,000 C410C154(1)5U5CA
180,000 C410C184(1)5U5CA
220,000 C410C224(1)5U5CA
270,000 C412C274(1)5U5CA
330,000 C412C334(1)5U5CA
270,000 C420C274(1)5U5CA
330,000 C420C334(1)5U5CA
390,000 C430C394(1)5U5CA
470,000 C430C474(1)5U5CA
560,000 C430C564(1)5U5CA
680,000 C430C684(1)5U5CA
820,000 C440C824(1)5U5CA
1,000,000 C440C105(1)5U5CA
(1) Insert proper letter for capacitance tolerance desired:
M = ±20%, Z = +80, -20%
KEMET
)1U5CA
)5U5CA
®
AXIMAX
CERAMIC CONFORMALLY COATED/RADIAL
S
C315
C320
C330
C340
C350
H
*
C333
H
*.276 (7.00) MIN.
S
C323
H
*
S
H
*
C317
C322
S
D
.060
(1.52)
MAX.
L
T
*
M
102
320
C
5
C
A
R
1
C
CERAMIC
CASE SIZE
(See Table Above)
SPECIFICATION
C — Standard
CAPACITANCE, CODE
Expressed in Picofarads (pF)
First Two Digits — Significant Figures
Third Digit — Number of Zeros (Use 9 for 1.0
thru 9.9 pF. Example: 2.2pF — 229)
FAILURE RATE
INTERNAL
CONSTRUCTION
CAPACITANCE TOLERANCE
D — ± 0.5 pF
F — ± 1%
G — ± 2%
J — ± 5%
A — Not Applicable
K — ± 10%
M — ± 20%
Z — -20, +80%
LEAD MATERIAL
C — Standard
5 — Standard
DIELECTRIC
EIA Designation
G — C0G (NP0) — Ultra-Stable
R — X7R — Stable
U — Z5U — General Purpose
RATED VOLTAGE
2 — 200
1 — 100
5 — 50
*
*Part Number Example: C320C102M1R5CA (14 digits – no spaces)
“GOLDEN MAX”
STANDARD LEAD CONFIGURATION — OUTLINE DRAWINGS
Drawings are not to scale. See table below for dimensions.
See page 9 for optional lead configurations.
DIMENSIONS — INCHES & MILLIMETERS
CASE L H T S(1) D
SIZE MAX. MAX. MAX. ±.030 +.004 - .001
C315 .150 (3.81) .210 (5.33) .100 (2.54) .100 (2.54) .020 (.51)
C317 .150 (3.81) .230 (5.84) .100 (2.54) .200 (5.08) .020 (.51)
C320 .200 (5.08) .260 (6.60) .125 (3.18) .100 (2.54) .020 (.51)
C322 .200 (5.08) .260 (6.60) .125 (3.18) .200 (5.08) .020 (.51)
C323 .200 (5.08) .320 (8.13) .125 (3.18) .200 (5.08) .020 (.51)
C330 .300 (7.62) .360 (9.14) .150 (3.81) .200 (5.08) .020 (.51)
C333 .300 (7.62) .390 (9.91) .150 (3.81) .200 (5.08) .020 (.51)
C340 .400 (10.16) .460 (11.68) .150 (3.81) .200 (5.08) .020 (.51)
C350 .500 (12.70) .560 (14.22) .200 (5.08) .400 (10.16) .025 (.64)
NOTE: 1 inch = 25.4 mm.
NOTE: (1) Measured at seating plane.
ORDERING INFORMATION
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 8
For packaging information, see pages 33 and 34.
CERAMIC CONFORMALLY COATED/RADIAL
Lead Spacing
.100" ± .030
Lead Spacing
.200" ± .030
Lead Spacing
.200" ± .030
Lead Spacing
.200" ± .030
Lead Spacing
.250" ± .030
Lead Spacing
.400" ± .030
.150
MAX.
.210
MAX.
.276
MIN.
.100
C 3 1 5
.150
MAX.
.230
MAX.
.230
± .030
.100
C 3 1 6
.200
.200
MAX.
.260
MAX.
.276
MIN.
.200
C 3 2 2 C 3 2 3
.320
MAX.
.276
MIN.
.200
.200
MAX.
.150
MAX.
.230
MAX.
.276
MIN.
.200
C 3 1 7
.150
MAX.
.235
MAX.
.276
MIN.
.200
C 3 1 8
.200
MAX.
.325
MAX.
.276
MIN.
C 3 2 8
.200
.200
MAX.
.350
MAX.
.230
± .030
.200
C 3 2 7
.270
.200
MAX.
.320
MAX.
.276
MIN.
.200
C 3 2 5
.300
MAX.
.360
MAX.
.276
MIN.
.250
C 3 3 1
.200
MAX.
.260
MAX.
.276
MIN.
.250
C 3 2 1
.500
MAX.
.560
MAX.
.276
MIN.
.400
C 3 5 0
.500
MAX.
.670
MAX.
.230
± .030
C 3 5 6
.400
.520
.400
MAX.
.590
MAX.
.230
± .030
.200
C 3 4 6
.320
.400
MAX.
.460
MAX.
.276
MIN.
.200
C 3 4 0
.200
MAX.
.260
MAX.
.276
MIN.
.100
C 3 2 0
.200
MAX.
.260
MAX.
.276
MIN.
.100
C 3 2 4 C 3 2 6
.230
± .030
.100
.200
.200
MAX.
.350
MAX.
.300
MAX.
.360
MAX.
.276
MIN.
.200
C 3 3 0
.300
MAX.
.390
MAX.
.276
MIN.
.200
C 3 3 3
.300
MAX.
.420
MAX.
.276
MIN.
.200
C 3 3 5
.300
MAX.
.450
MAX.
.230
± .030
.200
C 3 3 6
.300
The preferred lead wire configurations are shown on page 8. However, additional configurations are
available. All available options, including those on page 8, are shown below grouped by lead spacing.
OPTIONAL CONFIGURATIONS BY LEAD SPACING
“GOLDEN MAX”
KEMET
®
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 9
Golden Max
CERAMIC CONFORMALLY COATED/RADIAL
Manufacturer
(KEMET)
Rated Voltage
5 - 50 volts
1 - 100 volts
2 - 200 volts
Capacitance
Tolerance
Manufacturer
(KEMET)
Capacitance
& Tolerance
Dielectric
C0G
X7R
Z5U
Rated
Voltage
Capacitance
Code
Date Code
Front
K1K
Back
102
C31X & C32X Size
KX7R
105K
100V
0012
C340 & C350 Size
Rated Voltage
5 - 50 volts
1 - 100 volts
2 - 200 volts
Manufacturer
(KEMET)
Capacitance
Tolerance
Capacitance
Code
Dielectric
G - C0G
R - X7R
U - Z5U
K5U
104M
C33X Size
“GOLDEN MAX”
CAPACITOR MARKINGS
RATINGS & PART NUMBER REFERENCE: ULTRA-STABLE TEMPERATURE CHARACTERISTICS — C0G
CAPACITANCE PART NUMBER
100 pF C31(1)C101(3)2G5CA
120 pF C31(1)C121(3)2G5CA
150 pF C31(1)C151(3)2G5CA
180 pF C31(1)C181(3)2G5CA
220 pF C31(1)C221(3)2G5CA
270 pF C31(1)C271(3)2G5CA
330 pF C31(1)C331(3)2G5CA
390 pF C31(1)C391(3)2G5CA
470 pF C31(1)C471(3)2G5CA
NOTES: (1) Case Sizes C315/C317 are identical electrically, but differ in lead spacing. See table of dimensions. Insert the appropriate symbol, “5” or “7” in the part number.
KEMET
200 VOLT — C31X SIZE
1.0 pF C31(1
)C109(3)2G5CA
1.5 pF C31(1)C159(3)2G5CA
2.2 pF C31(1)C229(3)2G5CA
2.7 pF C31(1)C279(3)2G5CA
3.3 pF C31(1)C339(3)2G5CA
3.9 pF C31(1)C399(3)2G5CA
4.7 pF C31(1)C479(3)2G5CA
5.6 pF C31(1)C569(3)2G5CA
6.8 pF C31(1)C689(3)2G5CA
8.2 pF C31(1)C829(3)2G5CA
10 pF C31(1)C100(3)2G5CA
12 pF C31(1)C120(3)2G5CA
15 pF C31(1)C150(3)2G5CA
18 pF C31(1)C180(3)2G5CA
22 pF C31(1)C220(3)2G5CA
27 pF C31(1)C270(3)2G5CA
33 pF C31(1)C330(3)2G5CA
39 pF C31(1)C390(3)2G5CA
47 pF C31(1)C470(3)2G5CA
56 pF C31(1)C560(3)2G5CA
68 pF C31(1)C680(3)2G5CA
82 pF C31(1)C820(3)2G5CA
200 VOLT — C32X SIZE
1.0 pF C32(2
)C109(3)2G5CA
1.5 pF C32(2)C159(3)2G5CA
2.2 pF C32(2)C229(3)2G5CA
2.7 pF C32(2)C279(3)2G5CA
3.3 pF C32(2)C339(3)2G5CA
3.9 pF C32(2)C399(3)2G5CA
4.7 pF C32(2)C479(3)2G5CA
5.6 pF C32(2)C569(3)2G5CA
6.8 pF C32(2)C689(3)2G5CA
8.2 pF C32(2)C829(3)2G5CA
10 pF C32(2)C100(3)2G5CA
12 pF C32(2)C120(3)2G5CA
15 pF C32(2)C150(3)2G5CA
18 pF C32(2)C180(3)2G5CA
22 pF C32(2)C220(3)2G5CA
27 pF C32(2)C270(3)2G5CA
33 pF C32(2)C330(3)2G5CA
39 pF C32(2)C390(3)2G5CA
CAPACITANCE PART NUMBER
200 VOLT — C32X SIZE (Cont’d)
47 pF C32(2
56 pF C32(2)C560(3)2G5CA
68 pF C32(2)C680(3)2G5CA
82 pF C32(2)C820(3)2G5CA
100 pF C32(2)C101(3)2G5CA
120 pF C32(2)C121(3)2G5CA
150 pF C32(2)C151(3)2G5CA
180 pF C32(2)C181(3)2G5CA
220 pF C32(2)C221(3)2G5CA
270 pF C32(2)C271(3)2G5CA
330 pF C32(2)C331(3)2G5CA
390 pF C32(2)C391(3)2G5CA
470 pF C32(2)C471(3)2G5CA
560 pF C32(2)C561(3)2G5CA
680 pF C32(2)C681(3)2G5CA
820 pF C32(2)C821(3)2G5CA
1,000 pF C32(2)C102(3)2G5CA
1,200 pF C32(2)C122(3)2G5CA
1,500 pF C32(2)C152(3)2G5CA
1,800 pF C32(2)C182(3)2G5CA
2,200 pF C32(2)C222(3)2G5CA
2,700 pF C32(2)C272(3)2G5CA
3,300 pF C32(2)C332(3)2G5CA
200 VOLT — C33X SIZE
2,700 pF C33(4
3,300 pF C33(4)C332(3)2G5CA
3,900 pF C33(4)C392(3)2G5CA
4,700 pF C33(4)C472(3)2G5CA
5,600 pF C33(4)C562(3)2G5CA
6,800 pF C33(4)C682(3)2G5CA
8,200 pF C33(4)C822(3)2G5CA
.01 µF C33(4)C103(3)2G5CA
.012 µF C33(4)C123(3)2G5CA
.015 µF C33(4)C153(3)2G5CA
.018 µF C33(4)C183(3)2G5CA
200 VOLT — C340 SIZE
.018 µF C340C183(3
.022 µF C340C223(3)2G5CA
.027 µF C340C273(3)2G5CA
.033 µF C340C333(3)2G5CA
.039 µF C340C393(3)2G5CA
.047 µF C340C473(3)2G5CA
200 VOLT — C350 SIZE
.039 µF C350C393(3)2G5CA
.047 µF C350C473(3)2G5CA
.056 µF C350C563(3)2G5CA
.068 µF C350C683(3)2G5CA
KEMET
)C470(3)2G5CA
)C272(3)2G5CA
)2G5CA
CAPACITANCE PART NUMBER
100 VOLT — C31X SIZE
120 pF C31(1
150 pF C31(1)C151(3)1G5CA
180 pF C31(1)C181(3)1G5CA
220 pF C31(1)C221(3)1G5CA
270 pF C31(1)C271(3)1G5CA
330 pF C31(1)C331(3)1G5CA
390 pF C31(1)C391(3)1G5CA
470 pF C31(1)C471(3)1G5CA
560 pF C31(1)C561(3)1G5CA
680 pF C31(1)C681(3)1G5CA
820 pF C31(1)C821(3)1G5CA
1,000 pF C31(1)C102(3)1G5CA
100 VOLT — C32X SIZE
680 pF C32(2
820 pF C32(2)C821(3)1G5CA
1,000 pF C32(2)C102(3)1G5CA
1,200 pF C32(2)C122(3)1G5CA
1,500 pF C32(2)C152(3)1G5CA
1,800 pF C32(2)C182(3)1G5CA
2,200 pF C32(2)C222(3)1G5CA
2,700 pF C32(2)C272(3)1G5CA
3,300 pF C32(2)C332(3)1G5CA
3,900 pF C32(2)C392(3)1G5CA
4,700 pF C32(2)C472(3)1G5CA
5,600 pF C32(2)C562(3)1G5CA
100 VOLT — C33X SIZE
3,300 pF C33(4
3,900 pF C33(4)C392(3)1G5CA
4,700 pF C33(4)C472(3)1G5CA
5,600 pF C33(4)C562(3)1G5CA
6,800 pF C33(4)C682(3)1G5CA
8,200 pF C33(4)C822(3)1G5CA
.01 µF C33(4)C103(3)1G5CA
.012 µF C33(4)C123(3)1G5CA
.015 µF C33(4)C153(3)1G5CA
.018 µF C33(4)C183(3)1G5CA
.022 µF C33(4)C223(3)1G5CA
.027 µF C33(4)C273(3)1G5CA
100 VOLT — C340 SIZE
.027 µF C340C273(3
.033 µF C340C333(3)1G5CA
.039 µF C340C393(3)1G5CA
.047 µF C340C473(3)1G5CA
.056 µF C340C563(3)1G5CA
.068 µF C340C683(3)1G5CA
100 VOLT — C350 SIZE
.039 µF C350C393(3
.047 µF C350C473(3)1G5CA
.056 µF C350C563(3)1G5CA
.068 µF C350C683(3)1G5CA
.082 µF C350C823(3)1G5CA
.1 µF C350C104(3)1G5CA
.12 µF C350C124(3)1G5CA
(2) Case Sizes C320/C322/C323 are identical electrically. See table of dimensions. Insert the appropriate symbol, “0” or “2” or “3” in the part number.
(3) Insert proper symbol for capacitance tolerance as follows:
1.0 pF – 8.2 pF: D – ± 0.5pF
10 pF – 22 pF: J – ±5%, K – ±10%
27 pF – 47 pF: G – ±2%, J – ±5%, K – ±10%
56 pF and up: F – ±1%, G – ±2%, J – ±5%
(4) Case Sizes C330 and C333 are identical electrically. Insert the appropriate symbol “0” or “3” in the part number.
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 10
KEMET
)C121(3)1G5CA
)C681(3)1G5CA
)C332(3)1G5CA
)1G5CA
)1G5CA
CERAMIC CONFORMALLY COATED/RADIAL
“GOLDEN MAX”
KEMET
RATINGS & PART NUMBER REFERENCE: STABLE TEMPERATURE CHARACTERISTICS — X7R
®
CAPACITANCE PART NUMBER
200 VOLT — C31X SIZE
100 pF C31(1
120 pF C31(1)C121(3)2R5CA
150 pF C31(1)C151(3)2R5CA
180 pF C31(1)C181(3)2R5CA
220 pF C31(1)C221(3)2R5CA
270 pF C31(1)C271(3)2R5CA
330 pF C31(1)C331(3)2R5CA
390 pF C31(1)C391(3)2R5CA
470 pF C31(1)C471(3)2R5CA
560 pF C31(1)C561(3)2R5CA
680 pF C31(1)C681(3)2R5CA
820 pF C31(1)C821(3)2R5CA
1,000 pF C31(1)C102(3)2R5CA
1,200 pF C31(1)C122(3)2R5CA
1,500 pF C31(1)C152(3)2R5CA
1,800 pF C31(1)C182(3)2R5CA
2,200 pF C31(1)C222(3)2R5CA
200 VOLT — C32X SIZE
1,000 pF C32(2
1,200 pF C32(2)C122(3)2R5CA
1,500 pF C32(2)C152(3)2R5CA
1,800 pF C32(2)C182(3)2R5CA
2,200 pF C32(2)C222(3)2R5CA
2,700 pF C32(2)C272(3)2R5CA
3,300 pF C32(2)C332(3)2R5CA
3,900 pF C32(2)C392(3)2R5CA
4,700 pF C32(2)C472(3)2R5CA
5,600 pF C32(2)C562(3)2R5CA
6,800 pF C32(2)C682(3)2R5CA
8,200 pF C32(2)C822(3)2R5CA
.01 µF C32(2)C103(3)2R5CA
.012 µF C32(2)C123(3)2R5CA
.015 µF C32(2)C153(3)2R5CA
.018 µF C32(2)C183(3)2R5CA
.022 µF C32(2)C223(3)2R5CA
200 VOLT — C33X SIZE
.015 µF C33(4
.018 µF C33(4)C183(3)2R5CA
.022 µF C33(4)C223(3)2R5CA
.027 µF C33(4)C273(3)2R5CA
.033 µF C33(4)C333(3)2R5CA
.039 µF C33(4)C393(3)2R5CA
.047 µF C33(4)C473(3)2R5CA
.056 µF C33(4)C563(3)2R5CA
.068 µF C33(4)C683(3)2R5CA
.082 µF C33(4)C823(3)2R5CA
.1 µF C33(4)C104(3)2R5CA
200 VOLT — C340 SIZE
.1 µF C340C104(3
.12 µF C340C124(3)2R5CA
.15 µF C340C154(3)2R5CA
.18 µF C340C184(3)2R5CA
.22 µF C340C224(3)2R5CA
.27 µF C340C274(3)2R5CA
200 VOLT — C350 SIZE
.22 µF C350C224(3
.27 µF C350C274(3)2R5CA
.33 µF C350C334(3)2R5CA
.39 µF C350C394(3)2R5CA
.47 µF C350C474(3)2R5CA
KEMET
)C101(3)2R5CA
)C102(3)2R5CA
)C153(3)2R5CA
)2R5CA
)2R5CA
CAPACITANCE PART NUMBER
100 VOLT — C31X SIZE
820 pF C31(1)C821(3)1R5CA
1,000 pF C31(1)C102(3)1R5CA
1,200 pF C31(1)C122(3)1R5CA
1,500 pF C31(1)C152(3)1R5CA
1,800 pF C31(1)C182(3)1R5CA
2,200 pF C31(1)C222(3)1R5CA
2,700 pF C31(1)C272(3)1R5CA
3,300 pF C31(1)C332(3)1R5CA
3,900 pF C31(1)C392(3)1R5CA
4,700 pF C31(1)C472(3)1R5CA
5,600 pF C31(1)C562(3)1R5CA
6,800 pF C31(1)C682(3)1R5CA
8,200 pF C31(1)C822(3)1R5CA
.01 µF C31(1)C103(3)1R5CA
100 VOLT — C32X SIZE
4,700 pF C32(2
5,600 pF C32(2)C562(3)1R5CA
6,800 pF C32(2)C682(3)1R5CA
8,200 pF C32(2)C822(3)1R5CA
.01 µF C32(2)C103(3)1R5CA
.012 µF C32(2)C123(3)1R5CA
.015 µF C32(2)C153(3)1R5CA
.018 µF C32(2)C183(3)1R5CA
.022 µF C32(2)C223(3)1R5CA
.027 µF C32(2)C273(3)1R5CA
.033 µF C32(2)C333(3)1R5CA
.039 µF C32(2)C393(3)1R5CA
.047 µF C32(2)C473(3)1R5CA
.056 µF C32(2)C563(3)1R5CA
.068 µF C32(2)C683(3)1R5CA
.082 µF C32(2)C823(3)1R5CA
.1 µF C32(2)C104(3)1R5CA
100 VOLT — C33X SIZE
.068 µF C33(4
.082 µF C33(4)C823(3)1R5CA
.1 µF C33(4)C104(3)1R5CA
.12 µF C33(4)C124(3)1R5CA
.15 µF C33(4)C154(3)1R5CA
.18 µF C33(4)C184(3)1R5CA
.22 µF C33(4)C224(3)1R5CA
.27 µF C33(4)C274(3)1R5CA
.33 µF C33(4)C334(3)1R5CA
.39 µF C33(4)C394(3)1R5CA
.47 µF C33(4)C474(3)1R5CA
100 VOLT — C340 SIZE
.47 µF C340C474(3
.56 µF C340C564(3)1R5CA
.68 µF C340C684(3)1R5CA
.82 µF C340C824(3)1R5CA
1.0 µF C340C105(3)1R5CA
100 VOLT — C350 SIZE
.68 µF C350C684(3
.82 µF C350C824(3)1R5CA
1.0 µF C350C105(3)1R5CA
1.2 µF C350C125(3)1R5CA
KEMET
)C472(3)1R5CA
)C683(3)1R5CA
)1R5CA
)1R5CA
CAPACITANCE PART NUMBER
50 VOLT — C31X SIZE
3,300 pF C31(1)C332(3)5R5CA
3,900 pF C31(1)C392(3)5R5CA
4,700 pF C31(1)C472(3)5R5CA
5,600 pF C31(1)C562(3)5R5CA
6,800 pF C31(1)C682(3)5R5CA
8,200 pF C31(1)C822(3)5R5CA
.01 µF C31(1)C103(3)5R5CA
.012 µF C31(1)C123(3)5R5CA
.015 µF C31(1)C153(3)5R5CA
.018 µF C31(1)C183(3)5R5CA
.022 µF C31(1)C223(3)5R5CA
.027 µF C31(1)C273(3)5R5CA
.033 µF C31(1)C333(3)5R5CA
50 VOLT — C32X SIZE
.012 µF C32(2
.015 µF C32(2)C153(3)5R5CA
.018 µF C32(2)C183(3)5R5CA
.022 µF C32(2)C223(3)5R5CA
.027 µF C32(2)C273(3)5R5CA
.033 µF C32(2)C333(3)5R5CA
.039 µF C32(2)C393(3)5R5CA
.047 µF C32(2)C473(3)5R5CA
.056 µF C32(2)C563(3)5R5CA
.068 µF C32(2)C683(3)5R5CA
.082 µF C32(2)C823(3)5R5CA
.1 µF C32(2)C104(3)5R5CA
.12 µF C32(2)C124(3)5R5CA
.15 µF C32(2)C154(3)5R5CA
.18 µF C32(2)C184(3)5R5CA
.22 µF C32(2)C224(3)5R5CA
.27 µF C32(2)C274(3)5R5CA
50 VOLT — C33X SIZE
.15 µF C33(4
.18 µF C33(4)C184(3)5R5CA
.22 µF C33(4)C224(3)5R5CA
.27 µF C33(4)C274(3)5R5CA
.33 µF C33(4)C334(3)5R5CA
.39 µF C33(4)C394(3)5R5CA
.47 µF C33(4)C474(3)5R5CA
.56 µF C33(4)C564(3)5R5CA
.68 µF C33(4)C684(3)5R5CA
.82 µF C33(4)C824(3)5R5CA
1.0 µF C33(4)C105(3)5R5CA
50 VOLT — C340 SIZE
1.2 µF C340C125(3
1.5 µF C340C155(3)5R5CA
1.8 µF C340C185(3)5R5CA
2.2 µF C340C225(3)5R5CA
50 VOLT — C350 SIZE
2.2 µF C350C225(3
2.7 µF C350C275(3)5R5CA
3.3 µF C350C335(3)5R5CA
3.9 µF C350C395(3)5R5CA
4.7 µF C350C475(3)5R5CA
KEMET
)C123(3)5R5CA
)C154(3)5R5CA
)5R5CA
)5R5CA
Golden Max
NOTES: (1) Case Sizes C315/C317 are identical electrically, but differ in lead spacing. See table of dimensions. Insert the appropriate symbol, “5” or “7” in the part number.
(2) Case Sizes C320/C322/C323 are identical electrically. See table of dimensions. Insert the appropriate symbol, “0” or “2” or “3” in the part number.
(3) Insert proper symbol for capacitance tolerance as follows: K – ±10%, M – ±20%
(4) Case Sizes C330 and C333 are identical electrically. Insert the appropriate symbol “0” or “3” in the part number.
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 11
CERAMIC CONFORMALLY COATED/RADIAL
“GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE
GENERAL PURPOSE TEMPERATURE CHARACTERISTIC — Z5U
CAPACITANCE PART NUMBER
100 VOLT — C31X SIZE
1,000 pF C31(1)C102(3)1U5CA
1,200 pF C31(1)C122(3)1U5CA
1,500 pF C31(1)C152(3)1U5CA
1,800 pF C31(1)C182(3)1U5CA
2,200 pF C31(1)C222(3)1U5CA
2,700 pF C31(1)C272(3)1U5CA
3,300 pF C31(1)C332(3)1U5CA
3,900 pF C31(1)C392(3)1U5CA
4,700 pF C31(1)C472(3)1U5CA
5,600 pF C31(1)C562(3)1U5CA
6,800 pF C31(1)C682(3)1U5CA
8,200 pF C31(1)C822(3)1U5CA
.01 µF C31(1)C103(3)1U5CA
.012 µF C31(1)C123(3)1U5CA
.015 µF C31(1)C153(3)1U5CA
.018 µF C31(1)C183(3)1U5CA
100 VOLT — C32X SIZE
.01 µF C32(2
.012 µF C32(2)C123(3)1U5CA
.015 µF C32(2)C153(3)1U5CA
.018 µF C32(2)C183(3)1U5CA
.022 µF C32(2)C223(3)1U5CA
.027 µF C32(2)C273(3)1U5CA
.033 µF C32(2)C333(3)1U5CA
.039 µF C32(2)C393(3)1U5CA
.047 µF C32(2)C473(3)1U5CA
.056 µF C32(2)C563(3)1U5CA
.068 µF C32(2)C683(3)1U5CA
.082 µF C32(2)C823(3)1U5CA
0.1 µF C32(2)C104(3)1U5CA
.12 µF C32(2)C124(3)1U5CA
.15 µF C32(2)C154(3)1U5CA
100 VOLT — C33X SIZE
0.1 µF C33(4
.12 µF C33(4)C124(3)1U5CA
.15 µF C33(4)C154(3)1U5CA
.18 µF C33(4)C184(3)1U5CA
.22 µF C33(4)C224(3)1U5CA
.27 µF C33(4)C274(3)1U5CA
.33 µF C33(4)C334(3)1U5CA
.39 µF C33(4)C394(3)1U5CA
.47 µF C33(4)C474(3)1U5CA
100 VOLT — C340 SIZE
.47 µF C340C474(3
.56 µF C340C564(3)1U5CA
.68 µF C340C684(3)1U5CA
.82 µF C340C824(3)1U5CA
1.0 µF C340C105(3)1U5CA
1.2 µF C340C125(3)1U5CA
1.5 µF C340C155(3)1U5CA
100 VOLT — C350 SIZE
1.0 µF C350C105(3
1.2 µF C350C125(3)1U5CA
1.5 µF C350C155(3)1U5CA
1.8 µF C350C185(3)1U5CA
2.2 µF C350C225(3)1U5CA
KEMET
)C103(3)1U5CA
)C104(3)1U5CA
)1U5CA
)1U5CA
CAPACITANCE PART NUMBER
50 VOLT — C31X SIZE
4,700 pF C31(1)C472(3)5U5CA
5,600 pF C31(1)C562(3)5U5CA
6,800 pF C31(1)C682(3)5U5CA
8,200 pF C31(1)C822(3)5U5CA
.01 µF C31(1)C103(3)5U5CA
.012 µF C31(1)C123(3)5U5CA
.015 µF C31(1)C153(3)5U5CA
.018 µF C31(1)C183(3)5U5CA
.022 µF C31(1)C223(3)5U5CA
.027 µF C31(1)C273(3)5U5CA
.033 µF C31(1)C333(3)5U5CA
.039 µF C31(1)C393(3)5U5CA
.047 µF C31(1)C473(3)5U5CA
.056 µF C31(1)C563(3)5U5CA
.068 µF C31(1)C683(3)5U5CA
.082 µF C31(1)C823(3)5U5CA
0.1 µF C31(1)C104(3)5U5CA
50 VOLT — C32X SIZE
.027 µF C32(2
.033 µF C32(2)C333(3)5U5CA
.039 µF C32(2)C393(3)5U5CA
.047 µF C32(2)C473(3)5U5CA
.056 µF C32(2)C563(3)5U5CA
.068 µF C32(2)C683(3)5U5CA
.082 µF C32(2)C823(3)5U5CA
0.1 µF C32(2)C104(3)5U5CA
.12 µF C32(2)C124(3)5U5CA
.15 µF C32(2)C154(3)5U5CA
.18 µF C32(2)C184(3)5U5CA
.22 µF C32(2)C224(3)5U5CA
.27 µF C32(2)C274(3)5U5CA
.33 µF C32(2)C334(3)5U5CA
.39 µF C32(2)C394(3)5U5CA
.47 µF C32(2)C474(3)5U5CA
.56 µF C32(2)C564(3)5U5CA
50 VOLT — C33X SIZE
.27 µF C33(4
.33 µF C33(4)C334(3)5U5CA
.39 µF C33(4)C394(3)5U5CA
.47 µF C33(4)C474(3)5U5CA
.56 µF C33(4)C564(3)5U5CA
.68 µF C33(4)C684(3)5U5CA
.82 µF C33(4)C824(3)5U5CA
1.0 µF C33(4)C105(3)5U5CA
1.2 µF C33(4)C125(3)5U5CA
1.5 µF C33(4)C155(3)5U5CA
1.8 µF C33(4)C185(3)5U5CA
2.2 µF C33(4)C225(3)5U5CA
50 VOLT — C340 SIZE
2.2 µF C340C225(3
2.7 µF C340C275(3)5U5CA
3.3 µF C340C335(3)5U5CA
3.9 µF C340C395(3)5U5CA
4.7 µF C340C475(3)5U5CA
50 VOLT — C350 SIZE
3.9 µF C350C395(3
4.7 µF C350C475(3)5U5CA
5.6 µF C350C565(3)5U5CA
6.8 µF C350C685(3)5U5CA
KEMET
)C273(3)5U5CA
)C274(3)5U5CA
)5U5CA
)5U5CA
NOTES: (1) Case Sizes C315/C317 are identical electrically, but differ in lead spacing. See table of dimensions. Insert the appropriate
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 12
symbol, “5” or “7” in the part number.
(2) Case Sizes C320/C322/C323 are identical electrically. See table of dimensions.
Insert the appropriate symbol, “0” or “2” or “3” in the part number.
(3) Insert proper symbol for capacitance tolerance as follows:
M – ±20%
Z – +80%, -20%
(4) Case Sizes C330 and C333 are identical electrically. Insert the appropriate symbol “0” or “3” in the part number.
CERAMIC MOLDED AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS
®
KEMET
GENERAL
Working Voltage:
C0G – 50, 100 & 200 Volts
X7R – 50, 100 & 200 Volts
Temperature Characteristics:
C0G – 0 ±30 PPM/°C from -55°C to +125°C
X7R – ±15% from -55°C to +125°C
Capacitance Tolerance:
C0G – ±0.5 pF, ±1%, ±2%, ±5%, ±10%, ±20%
(±0.5 pF is tightest available tolerance)
X7R – ±10%, ±20%, -0 +100%, -20% +80%
Construction:
Monolithic block of ceramic dielectric with interdigitated
internal electrodes, encapsulated in a molded case, and
having axial or radial leads. Meets flame test requirements
of UL Standard 94V-0.
Terminal Strength:
EIA-RS-198D Method 303 Condition A (2.2 kg)
ELECTRICAL
Capacitance:
Within specified tolerance when measured with 1 volt rms
at 1 kHz (1000 pF or less at 1 MHz for C0G).
Dissipation Factor:
25°C at 1 kHz (1000 pF or less at 1 MHz for C0G).
C0G – .15% maximum
X7R – 2.5% maximum
Insulation Resistance:
After 2 minutes electrification at 25°C and rated voltage
C0G – 100K megohms or 1000 megohm - µF, whichever
is less.
X7R – 100K megohms or 1000 megohm - µF, whichever
is less.
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current limited
to 50 mA at 25°C.
Life Test:
2000 hours at 200% of rated voltage at 125°C. Post-Test
limits at 25°C are:
Capacitance Change:
C0G – less than 3% or 0.25 pF, whichever is higher
X7R – ±20% of initial value
Dissipation Factor:
C0G – .25% maximum
X7R – 3.0% maximum
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
ENVIRONMENTAL
Moisture Resistance:
MIL-STD-202, Method 106, or EIA-RS-198D, Method 204,
Condition A, except 20 cycles.
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
Immersion Cycling:
MIL-STD-202, Method 104, Condition B. Post-Test limits
at 25°C are:
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Solderability:
MIL-STD-202, Method 208, Sn62 solder, 245°C for 5 ±1/2
seconds.
Resistance to Soldering Heat:
MIL-STD-202, Method 210, Condition B (260°C, 10 secs).
Depth of immersion — to a minimum of .050" from the
capacitor body.
Lead Material:
Axial: Solder-coated copper clad steel
Radial: Solder-coated copper
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 13
Axial & Radial
Ceramic Molded