Kelvinator KSV80HRC, KSV70HRC, KSV70CRC, KSV62HRC, KSV53HRC Installation Manual

Inverter Split Room Air Conditioner

Installation Manual

KSV26CRC, KSV26HRC, KSV35CRC,
KSV35HRC, KSV53HRC, KSV62HRC,

KSV70CRC, KSV70HRC, KSV80HRC

Refrigerant R410A

2 Contents Kelvinator Air Conditioning

Congratulations and thank you for choosing our Inverter Split
room air conditioner. We are sure you will find
your new air conditioner a pleasure to use. Before you use
the air conditioner, we recommend that you read through
the entire user manual, which provides the description of
the air conditioner and its functions.

To avoid the risks that are always present when you use an
electrical appliance, it is important that the air conditioner
is installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards.

We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.

After unpacking the air conditioner please check it is not
damaged. If in doubt, do not use the air conditioner but
contact your local Electrolux Customer Care Centre.

environmental tip

Information on disposal for users

• Most of the packing materials are recyclable.
Please dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.

• If you wish to discard this air conditioner, please contact

your local authorities and ask for the correct method
of disposal.

caution

• The air conditioner is not intended for use by young
children or inrmed persons without supervision.

• Young children should be supervised to ensure that
they do not play with the air conditioner.

• Contact an authorised installer for installation of this unit.

• Contact an authorised service technician for repair or
maintenance of this unit.

• If the power cord is to be replaced, replacement work
shall be performed by authorised personnel only.

• Installation work must be performed in accordance
with the national wiring Standards by authorised
personnel only.

Conditions of use

This appliance is intended to be used in household and
similar applications such as:

• Staff kitchen areas in shops, offices and other working
environments

• Farm houses

• By clients in hotels, motels, and other residential

type environments

• Bed and breakfast type environments

Contents ............................................................................ 2

Important safety instructions ........................................... 3

Notice for installation ....................................................... 3

Installation ......................................................................... 4

Installation drawing .......................................................... 5

Installation of indoor unit .................................................6

Refrigerant pipe connection .............................................8

Installation of outdoor unit ............................................... 9

Check after installation and operation test .................... 10

Installation and maintenance of HEPA filter ................... 10

Warranty .......................................................................... 11

Congratulations Contents

caution

1 The unit must only be installed by a qualified refrigeration

mechanic and electrical work carried out by a qualified
electrician according to local or government regulations
and in compliance with this manual.

2 If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

4 The appliance must be positioned so that the plug

is accessible.

5 The temperature of refrigerant circuit will be high,

please keep the interconnection cable away from the
copper tube.

6 This appliance is not intended for use by persons

(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.

Children should be supervised to ensure that they do not

play with the appliance.

warning

Before obtaining access to terminals, all supply circuits must
be disconnected.

Please read this installation manual and the user manual
before installation and store in a handy place for later
reference. Inside you will find many helpful hints on how to
install and test the air conditioner properly.

Electrical work must be carried out by a licensed electrician.
Be sure to use the correct rating of the power plug and main
circuit for the model to be installed.

Incorrect installation due to ignoring this instruction will
cause harm or damage, and the seriousness is classified by
the following indications.

Meanings of symbols used in this manual are shown below:

warning

This symbol indicates information concerning your
personal safety

caution

This symbol indicates information on how to avoid
damaging the appliance

tips and information

This symbol indicates tips and information about
use of the appliance

environmental tip

This symbol indicates tips and information about
economical and ecological use of the appliance

This symbol indicates never to do this

This symbol indicates always do this

Important safety instructions Notice for installation

Kelvinator Air Conditioning Important safety instructions/Notes for installation 3

4 Installation Kelvinator Air Conditioning

Safety precautions

1 A dedicated power supply circuit should be used for

products not supplied with a service cord and plug in
accordance with local electrical safety regulations.

3 The unit must be reliably earthed and connected to

the special earth device by a qualified electrician.

4 The circuit breaker must have the functions of magnetic

tripping and heat tripping to prevent short circuit
and overload.

5 The appliance must be installed in accordance with

national wiring regulations.

6 Including a circuit breaker with suitable capacity, please

note the following table.

Model Circuit Breaker (Amps)

KSV26CRC

10

KSV26HRC

10

KSV35CRC

10

KSV35HRC

10

KSV53HRC

15

KSV62HRC

15

KSV70CRC

20

KSV70HRC

20

KSV80HRC

20

Note:

• Make sure the live wire, neutral wire and earth wire in
the power socket are properly connected.

• Inadequate or incorrect electrical connections may cause

electric shock or fire.

Earthing requirements

1 Air conditioner is type I electric appliance. Please ensure

the unit is reliably earthed.

2 The yellow-green wire in air conditioner is the earthing

wire which cannot be used for other purposes. Improper
earthing may cause electric shock.

3 The earth resistance should adhere to the national

wiring regulation.

4 The user's power must have reliable earthing terminal.

Do not connect the earthing wire with the following:

1. Water pipe

2. Gas pipe

3. Contamination pipe

Installation

Installation site instructions

A proper installation site is vital for correct and efficient
operation of the unit. Avoid the following sites where:

• strong heat sources, vapours, ammable gas or volatile

liquids are emitted.

• high-frequency electro-magnetic waves are generated

by radio equipment, welders or medical equipment.

• salt-laden air prevails (such as close to coastal areas).

• the air is contaminated with industrial vapours and oils.

• the air contains sulphurous gas such as in hot spring

zones.

• corrosion or poor air quality exists.

Installation site of indoor unit

1 The air inlet and outlet should be away from the

obstructions. Ensure the air can be blown through the
whole room.

2 Select a site where the condensing water can be

easily drained out, and where it is easily connected for
the outdoor unit.

3 Select a place where it is out of reach of children.

4 Select the place where the wall is strong enough to

withstand the full weight and vibration of the unit.

5 Be sure to leave enough space to allow access for routine

maintenance. The installation site should be 2m or more

above the oor.

6 Select a place about 1m or more away from a TV set or

any other electric appliance.

7 Select a place where the filter can be easily taken out.

8 Make sure that the indoor unit is installed in accordance

with installation dimension instructions (refer to page 5).

9 Do not use the unit in the laundry or by a swimming

pool etc.

Installation site of outdoor unit

1 Select a site where noise and outow air emitted by unit

will not annoy neighbors.

2 Select a site where there is sufficient ventilation.

3 Select a site where there is no obstruc tion blocking the

inlet and outlet.

4 The site should be able to withstand the full weight

and vibration of the unit.

5 Select a dry place, but do not expose the unit to direc t

sunlight or strong wind.

6 Make sure that the outdoor unit is installed in accordance

with the installation instructions, and is convenient for
maintenance and repair.

7 Ensure that the height difference between indoor and

outdoor units complies with the table on page 8.

8 Select a place where it is out of reach of children.