Kelvinator KSV25HRD, KSV35HRD, KSV52HRD, KSV70HRD, KSV80HRD User Manual
1 1
Contents Safety
Inverter Split
Room Air Conditioner
User Manual
KSV25HRD, KSV35HRD, KSV52HRD,
KSV70HRD, KSV80HRD
Refrigerant R410A
2
Contents
Congratulations and thank you for choosing our Inverter splittype room air conditioner. We are sure you will find your new air
conditioner a pleasure to use. Before you use the air conditioner,
we recommend that you read through the entire user manual, which
provides the description of the air conditioner and its functions.
To avoid the risks that are always present when you use an electrical
appliance, it is important that the air conditioner is installed
correctly and that you read the safety instructions carefully to avoid
misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the air conditioner please check it is not damaged.
If in doubt, do not use the air conditioner but contact your local
Electrolux Customer Care Centre.
ENVIRONMENTAL TIPS
environment
Information on disposal for users
• Most of the packing materials are recyclable. Please dispose
of those materials through your local recycling depot or by
placing them in appropriate collection containers.
• If you wish to discard this air conditioner, please contact your
local authorities and ask for the correct method of disposal.
Conditions of use
This appliance is intended to be used in household and similar
applications such as:
• Staff kitchen areas in shops, offices and other working
environments
• Farm houses
• By clients in hotels, motels, and other residential
type environments
• Bed and breakfast type environments
Contents ......................................................................2
Safety precautions ....................................................... 3
Parts identification ....................................................... 4
Quickstart guide ..........................................................5
Using the remot e control ............................................. 6
Features of the remote control .................................... 7
Changing batteries .................................................... 10
Emergency operation.................................................10
Care and cleaning ...................................................... 11
Operation tips............................................................ 12
Troubleshooting ......................................................... 13
Installation checklist ................................................... 14
Important notes
WARNING
caution
• Contact an authorised installer for installation of this unit.
• Contact an authorised service technician for repair or
maintenance of this unit.
• The socket oulet required to supply power must be connected
and commissioned by a licenced electrician.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Young children should be supervised to ensure that they do
not play with the air conditioner.
• If the power cord is to be replaced, replacement work shall be
performed by authorised personnel only.
• Installation work must be performed in accordance with the
national wiring standards and the electricity suppliers service
rules by authorised personnel only.
• If the system is to be moved to another location or disposed
of, only a suitably qualified person is permitted to undertake
such work.
• Take care not to catch fingers on the fan blade when adjusting
vertical louvres.
• This air conditioner uses R410A refrigerant (Confirm before
installation).
Congratulations Contents
3Safety
Safety precautions
Inside this manual you will find many helpful hints on how to use
and maintain your air conditioner properly.
Just a little preventive care on your part can save you a great deal
of time and money over the life of your air conditioner. You'll find
many answers to common problems in the chart of troubleshooting
tips on page 13. If you review the chart of troubleshooting tips first,
you may not need to call for service.
Meanings of symbols used in this manual are shown below:
WARNING
caution
This indicates information concerning your personal safety and
how to avoid damaging the appliance
TIPS & INFORMATION
important
This symbol indicates tips and information about
use of the appliance
ENVIRONMENTAL TIPS
environment
This symbol indicates tips and information about economical and
ecological use of the appliance
This symbol indicates never to do this
Always do this
Important notes:
1 Do not operate unit with horizontal louvre in closed position.
2 Do not operate unit without the air filter.
WARNING
warning
If you notice an unusal situation, such as a burning
smell, please switch off the power to the air
conditioner and contact an Electrolux service agent.
If this abnormal status continues the air conditioner
may be damaged or even cause electric shock or fire.
Do not operate the air conditioner with wet hands.
This may cause electric shock.
Do not damage or cut off the power cord or other
wires. If this occurs, please have it repaired or
replaced by an accredited technician.
Do not connect this air conditioner to a multi
outlet powerboard.
Please switch off the power supply to the air
conditioner if it is not to be used for an
extended period.
Otherwise, it will accumulate dust and may cause a fire.
Before cleaning the air conditioner, please
disconnect the power supply in order to eliminate
the possibility of electric shock.
The power supply should be matched with the air
conditioner according to the installation manual.
Air conditioners provided with a supply cord should
be connected directly to a power outlet with a
suitable safety switch. Air conditioners that are hard
wired must be connected to a suitable safety circuit
breaker according to the installation manual.
Please ensure that the power supply to the air
conditioner is stable and meets the requirements set
out in the installation manual.
Always ensure the product is installed with
appropriate earthing.
For safety, be sure to turn off the circuit breaker
before performing any maintenance or cleaning or
when the product is not used for an extended
period of time.
Accumulated dust may cause fire or electric shock.
WARNING
caution
Select the most appropriate temperature.
It can save electricity.
Do not keep windows and doors open for a long
time during operation.
It will result in insufficient performance.
Do not block the air inlet or outlet.
It will result in insufficient performance and cause
malfunctions.
Keep combustible materials away from the units at
least 1m.
It may cause fire.
Do not step on the top of the outdoor unit or place
heavy things on it.
It may cause damage or injury.
Do not attempt to repair the air conditioner yourself.
Incorrect repairs may cause electric shock or fire.
Please contact your local authorised service centre.
Do not insert your hands or objects into the air inlet
or outlet.
It may cause injury.
Do not expose animals or plants directly to the air
flow.
Do not use the unit for any other purpose, such as
preserving food or drying clothes.
Do not splash water on the air conditioner.
It may cause electric shock or malfunction.
4 Name of parts
Indoor unit
(3)
(2)
(1)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Power cord
(2) Remote controller
(3) Front panel
(4) Filter
(5) Horizontal louver
(6) Wall pipe
(7) Binding tape
(8) Connection pipe
(9) Drain hose
(10) Drain connector
(11) Indoor display
(when active)
Outdoor unit
Air in
Air in
(11)
Air out
Air out
Name of parts
5Quickstart guide
Quickstart guide
2
1
3
4
6
7
5
8
9
General operation
1. Once power is connected, press the ON/OFF button (1) and
the air conditioner will start to run.
Note: When the power is connected the main louver will close
automatically
2. Press the mode button (2) to select the desired runnng mode
(heating, cooling, fan only or dehumidify).
3. Pressing
or button (3) to select the desired temperature.
(It is unnecessary to set the temperature
in AUTO MODE.)
4. Pressing the fan button (4) will allow you to select from
6 different fan speeds from high to low, including an AUTO
setting.
5. The swing buttons (5) will allow you to select horizontal (H) or
vertical (V) swing of the air guding louvers.
：Cool
：Dry
：Heat
：Set temp
：
Power
The icons displayed on the indoor unit:
Optional operations
6. Press the SLEEP button (6) to select the sleep mode.
7. The TIMER ON and TIMER OFF buttons (7) can be used to set
automatic start and stop for the air conditioner, (see detailed
instructions for more information)
8. The light button (8) can be used to swith on or off the display
on the front panel of the indoor unit.
9. Press TURBO button, can realize the ON and OFF of TURBO
function.
Special functions
This function indicates that moisture on evaporator of indoor unit
will be blowed after the unit is stopped to avoid mould.
X-FAN (Air Purge)
When the X-fan function is on, the fan will continue to run for 2
minutes at low speed after the off button is pressed in order to
purge the air conditioner of all moisture to avoid the growth of
mould.
About AUTO RUN
When AUTO RUN mode is selected, the set temperature will not be
displayed on the LCD, the unit will be in accordance with the room
temperature automatically to select the suitable running method
and to make ambient comfortable.
Turbo function
The Turbo function operates a higher than normal fan speed to
allow for rapid heating or cooling.
Remote lock
Press SWING-V and ION-FILTER buttons simultaneously to lock or
unlock the keyboard. If the remote control is locked, the icon
will
be displayed on it, in which case, press any button, the mark will
flicker three times. If the keyboard
is unlocked, the mark will disappear.
Switch between Centigrade and Farenheit
With the air conditinioner switched off, press the SWING-H and
ION-FILTER buttons simultaneously to switch between °C and °F .
Energy saving
Press ION-FILTER and CLOCK simultaneously to start or stop
enegry saving funtion. The remote control display will show “SE”
when this function is active.
Low heat mode
In heating mode, pressing ION-FILTER and CLOCK simultaneously
will put the air conditioner into a low heat mode that will operate to
a temperature of 8°C. Repeat the operation to quit the function.
Loading...