components
item description qty
standard headboard assembly
A Headboard 1
B Headboard Leg 2
Please note: actual headboard may
look dierent than illustration.
headboard hardware
A
B
(H1) x 4
5/8” x 5/16” bolt
(H2) x 12
1 1/4” washer
(H3) x 4
1 x 1/4” bolt
(H4) x 4
1/4” nuts
Please note: you will need a at head screwdriver and a wrench to assemble your headboard.
limited warranty
guarantees its upholstered furniture against
defects in construction for a period of one (1)
year. When a structural defect is brought to our
attention, we will repair or replace it at our
option at no charge to
parts and labor, not transportation costs). Fabric
wearability
for upholstered furniture is not covered by the
warranty. Vacuum for regular cleaning.
PLEASE DISPOSE OF PLASTIC BAGS AND
CARTONS RESPONSIBLY.
the customer (inculdes
limite de garantia
garantiza sus muebles tapizados contra
defectos en construccion por un periodo de un
(1) ano. Cuando un problema de estructura es
traido a nuestra atencion, nosotros
repararemos o remplazaremos sin ningun
cargo a nuestro cliente (incluye partes y trabajo,
no costo en transportacion). Descolora-miento
del material de muebles tapizados no es
cubierto por la garantia. Regularmente puede
aspirar.
POR FAVOR TIRAR BOLSAS Y CAJAS
RESPONSABLEMENTE.
garantie limitée
garantit ses meubles rembourrés contre les
défauts de construction pendant une période d’un
(1) an. Lorsqu’un vice de construction nous est
signalé, nous réparons ou remplaçons le meuble,
selon notre choix, sans frais pour le client (incluant
les pièces et la main-d’oeu-vre, mais excluant les
frais de transport). La dura-bilité du tissu des
meubles rembourrés n’est pas couverte par la
garantie. Nettoyer régulièrement avec un
aspirateur.
VEUILLEZ JETER
ET BOÎTE(S) DE FAÇON RESPONSABLE.
LE OU LES SAC(S) EN PLASTIQUE
1
standard headboard assembly
step 1 - attaching the headboard legs
OUT
A
B
1.1
Place (A) headboard face down on
a flat surface. Place (B) headboard
legs on the back of (A) headboard,
aligning the slots of the legs with the
holes of the headboard.
Please note: Make sure the “Out”
sticker on each (B) headboard leg is
facing the correct way.
1.2
Attach (B) headboard legs to (A)
headboard using (H1) bolts and (H2)
washers. Tighten with a flat head
screwdriver.
step 2 - attaching the headboard to your bed frame
2.1
Attach the assembled headboard to
your bedframe using (H3) bolts, (H2)
washers and (H4) nuts. Tighten with a
flat head screwdriver and wrench.
Please note: The height of your
headboard can be adjusted by
loosening the (H1) bolts and shifting
the (A) headboard up or down.
2
Loading...