Full / Queen Metal Headboard
PART LIST
A
Headboard Panel
1 PC
B
Leg Extension
2 PCS
HARDWARE LIST
#1
Bolt
4 PCS (Extra 1)
1/4" x 1/2"L
#2 #3
Long Bolt
4 PCS (Extra 1)
1/4" x 2-1/4"L
#4
Hex Nut
8 PCS (Extra 1)
1/4"
#5
Flat Washer
12 PCS (Extra 1)
Ø16xØ6.5x1MM
#6 #7
Wrench
1 PC
Allen Wrench
1 PC
Medium Bolt
4 PCS (Extra 1)
1/4" x 1"L
C
Adapter Plate
2 PCS
2
Step 1. Lay headboard panel (part A) upside down on a soft flat surface, such as carpet, as shown below.
Attach leg extensions (part B) to headboard panel (part A) using bolts (part #1), flat washers (part #5)
and allen wrench (part #6).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Step 2. QUEEN SIZE
Attach bed frame (*Not Included) to leg extensions (part B) using long bolts (part #3), flat washers (part
#5), hex nuts (part #4), allen wrench (part #6) and wrench (part #7).
NOTE: Please fully tighten all bolts at this time.
#1
x4
#6
x1
#5
x4
#6
#1
#5
A
B
A
B
B
#6
x1
#3
x4
#5
x4
#4
x4
#6
#3
#5
#4
#7
x1
#7
Step 3. FULL SIZE
Attach adapter plates (part C) to leg extensions (part B) using long bolts (part #3), flat washers (part
#5), hex nuts (part #4), allen wrench (part #6) and wrench (part #7). See Figure 1.
Attach bed frame (*Not Included) to adapter plates (part C) using medium bolts (part #2), flat washers
(part #5), hex nuts (part #4), allen wrench (part #6) and wrench (part #7). See Figure 2.
NOTE: Please fully tighten all bolts at this time.
#6
x1
#3
x4
#5
x8
#4
x8
#7
x1
#2
x4
#7
#7
#6
#6
#2
#3
#5
#4
#5
#4
C
C
B
B
Figure 1
Figure 2
3
B
B
Loading...