Be sure to check all packing material carefully for small
parts, which may have come loose inside the carton
during shipment.
Made in Viet Nam
Page 1 of 1
Assembly Instructions
To remove the drawer if it ever becomes
necessary:
A. Pull the drawer fully open so the black
latch is visible in the inside channel of the
guides.
B. Release the latches by simultaneously
pushing one lever up and the other down.
C. At the same time, pulling the drawer
forward until the slides release.
To reinstall the drawers, carefully align the
channels of both guides and push drawer
back in until fully closed. Open and close
drawer fully a couple times to verify
proper operation.
There are Levelers located underneath all four
corners, which can be adjusted to compensate for
uneven flooring if needed. To adjust, after
determining which leveler needs adjusting,
carefully have one person tilt the dresser while
another person reaches underneath, adjusting the
leveler as needed.
There is a two-outlet power bar with
USB port mounted at the back,
which can be used to conveniently
supply power to personal electronic
devices or other accessories, when
plugged into a wall outlet.
Bed Room
3 DRAWER NIGHTSTAND
Loading...