components
Chaise Assembly
item description qty
A Seat 1
B
B Back 1
C Back Legs 2
D Front Legs 2
Please note: actual product may
look dierent than illustration.
A
C
hardware
(H1) x 11
1 1/4" flat washer
limited warranty
We guarantee our upholstered furniture against
defects in construction for a period of one (1)
year. When a structural defect is brought to our
attention, we will repair or replace it at our option
at no charge to the customer (inculdes parts and
labor, not transportation costs).
Fabric wearability for upholstered furniture is not
covered by the warranty. Vacuum for regular
cleaning.
PLEASE DISPOSE OF PLASTIC BAGS AND
CARTONS RESPONSIBLY.
(H2) x 7
5/16" nut
Please note: you will need a wrench to
complete this assembly.
limite de garantia
Nosotros garantiza sus muebles tapizados
contra defectos en construccion por un periodo
de un (1) ano. Cuando un problema de
estructura es traido a nuestra atencion, nosotros
repararemos o remplazaremos sin ningun cargo
a nuestro cliente (incluye partes y trabajo, no
costo en transportacion).
Descolora-miento del material de muebles
tapizados no es cubierto por la garantia.
Regularmente puede aspirar.
POR FAVOR TIRAR BOLSAS Y CAJAS
RESPONSABLEMENTE.
D
garantie limitée
Nous garantit ses meubles rembourrés contre les
défauts de construction pendant une période d’un
(1) an. Lorsqu’un vice de construction nous est
signalé, nous réparons ou remplaçons le meuble,
selon notre choix, sans frais pour le client (incluant
les pièces et la main-d’oeu-vre, mais excluant les
frais de transport).
La dura-bilité du tissu des meubles rembourrés
n’est pas couverte par la garantie. Nettoyer
régulièrement avec un aspirateur.
VEUILLEZ JETER LE OU LES SAC(S) EN PLASTIQUE
ET BOÎTE(S) DE FAÇON RESPONSABLE.
1
step 1
Chaise Assembly
1.1
Place (B) back face down on a flat surface and
peel back velcro flap.
Insert (C) back legs onto bolts and attach using
(H1) washers and (H2) nuts. Make sure notch
of (C) back legs are flush with the bottom of (B)
back. Tighten with wrench.
Replace velcro flap.
step 2
2.1
Turn (B) back over. Fit (A) seat onto bolts of
(B) back, aligning sides and bottoms of both
pieces.
2.2
Attach (A) seat to (B) back using (H1) washers
and (H2) nuts.
Tighten with wrench.
2
step 3
Chaise Assembly
3.1
Remove plastic caps from (D) front legs, and attach to (A) seat using one
(H1) washer per leg.
Once legs are secure, turn the chaise upright to check if level.
If the item is not level, unscrew the shortest leg and add an additional (H1)
washer.
Repeat as needed.
Please note: you may have extra (H1) washers depending on how many you use
to level the chaise.
3
Loading...