Aberdeen
Dining Room
Assembly Instructions
Components and Hardware List (for one chair)
Be sure to check all packing material carefully for small parts, which may have come
loose inside the carton during shipment.
Page 1 of 2
Made in Viet Nam
#21358 Side Chair
Fx2
Steps:
1. Place the Chair Back Assembly (A) on a soft and smooth surface such as a blanket or carpet.
2. Attach Chair Seat (B) to the Back Assembly by using the 3-1/4" long Bolt (D) Spring Washer (G)
and Flat Washer (H) into the back corners of the Seat and 1-1/2" long Bolt (F) Spring Washer (G)
and Flat Washer (H) into the middle of the Seat, as shown
next step.
. Do not fully tighten Bolts until after
Aberdeen
Dining Room
Assembly Instructions
Page 2 of 2
Made in Viet Nam
3. Attach Front Legs (C) to the Chair Seat (B) by using the 2-1/4" long Bolts (E) Spring Washer (G) and
Flat Washer (H) as shown in
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (I).
Step 3.
Loading...