14 pcs.
12 pcs.
5mm Allen Wrench
1 pc.
10pcs.
5/16" x 19mm
Flat Washer
Table Column
2 pcs.
Bottom Stretcher
1 pc.
Top Stretcher
1 pc.
Table Top
Table Top Leaf
1 pc.
2pcs.
K
G
H
I
STEP 4
STEP 1 & 2
STEP 3
D
E
Components and Hardware List
A
C
B
G H
I
F
J
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton
during shipment. Separate and check all parts against the Components and Hardware List above.
Step 1: Attach the Bottom Stretcher (E) between the two Table Columns (C) using the 3-1/4" long Allen
Head Bolts (F), Spring Washers (H) and Flat Washers (J). Do not fully tighten until after Step 2.
Step 2: Attach the Top Stretcher (D) between the two Table Columns using the 1-3/4" long Allen
Head Bolts (G) Spring Washers (H) and Flat Washers (I). Pull all parts snug together and
tighten with the Allen Wrench (K).
Allen Head Bolt
M5/16-18 x 3-1/4" L.
5/16" Spring Washer
K
5/16"x 30mm
Flat Washer
2 pcs.
J
F
K
H
E
4pcs.
Allen Head Bolt
M5/16-18 x 1-3/4" L.
I
H
F
K
I
H
F
K
TABLE LOCK
Open position
TABLE LOCK
Closed position
Step 3: Carefully place the Table Top (A) upside down on a soft surface
such as a blanket or carpet. Position the Assembled Table Base on
the Table Top and attach the Table Column and the Top
Stretchers using the 3-1/4" Bolts (F), Spring Washers (H) and Flat
Washers (I). Tighten Bolts with the Allen Wrench (K).
Step 4: Using two people, carefully set the assembled table upright
and move to the desired location in the room.
If the Table Leaf (B) will be used, open Table Top, drop in Table
Leaf, aligning pins in the edges and re-lock the Table Top latches
underneath the top.
When installing or removing the Leaf, after unlocking the catches
on the underneath side of the Table Top, pull the end rail
outward. Remove or add the leaf, slide the Table Top back
together and re-lock the catches underneath.
Note: To prevent undue stress on the table if moving, always use
two people and carry the table from one location to the other.
D
C
A
B
Made in China
Page 1 of 1
Dining Room
Assembly Instructions
RECTANGULAR DINING
TABLE
Loading...