ASSEMBLY INSTRUCTION
PARTS&HARDWARE LIST
NO.
DESCRIPTION
QTY
A
Table Top
1
B
Leg
4
C
Connecting Part
4
E
Headless Screw M8
4
F
Flat Washer M8
12
G
Spring Washer M8
12
H
Nut M8
12
I
Plastic Cap
12
CAUTION:
1. Do Not Use Power Tools!
2. Please read these instructions carefully before assembly. Count and organize all parts before you
begin.
3. Assemble product on a clean and soft surface, such as a piece of carpet, so as to prevent the
surface paint of parts from scratching off. Do Not Use Power Tools!
ASSEMBLY:
1. Attach the legs to the table top using M8 headless screw, flat washer, spring washer and nut. Do
not tighten completely at this stage.
2. Attach the connecting parts to the table legs using M8 headless screw, flat washer, spring
washer and nut. Do not tighten completely at this stage.
3. Put the assembled table on flat surface and tighten all the screws gradually, then cover the
plastic caps on the nuts.
4. Fix the adjustable feet pads under legs if the table is unbalanced.
(Aluminum is a soft metal, over tightening may strip thread or break parts)
PLEASE DO NOT OVERTIGHTEN
Loading...