ASSEMBLY INSTRUCTION
TWO TONE COFFEE & ANTIQUE GREY FINISH 18” BUTTERFLY LEAF DINING TABLE
A
Table Top
1 pc
B
E F
Flat Washer
5/16”x22mm
8 pcs
Table Legs
4 pcs
Wrench
12.8mm
1 pc
C D
Hex Bolt
5/16”
8 pcs
Lock Washer
5/16”(M8)
8 pcs
1
This page lists all the contents included
in the box. Please take the time to identify
the hardware as well as the individual
components to this product. As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage.
1
Turn the table top (A) upside down on a protective surface such as carpet or other soft material.
Place the Leg (B) to corner of Apron, then tighten the Flat Washer (E), Lock washer (D) and Hex Bolt (C)
using the Wrench (F) provided. Repeat the same for the other Legs. Set the Table (A) upright on its
Legs (B).
B
B
A
E
D
C
F
2
Unlock the hook underneath the table and pull the Table Top (A) wide open equally from both end.
Lift both leaves from the compartment.
A
A
B
3
Flip down the aprons and unfold leaf and place the leaf on the Table Top (A) surface carefully.
Push Table Top (A) from both ends to close. Lock the hook underneath the table.
A
B
CLEANING & CARE
Treat surface with care.Surface is resistant to scratches but is not scractch resistant.Clean surface with a
dry or damp soft cloth.Do not use abrasive cleaners. Hardware may loosen over time. Periodically check
that all connections are tight.
2
Loading...