Step 1
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton
during shipment.
Components List :
1 OF 2
NO
SKETCH QTY
Table Top
A
1pc
DESCRIPTION
B
4pcs
Leg
Please keep all hardware parts out of the reach of children.
1. We recommend that you should assemble this product with the assistance of another person; this will make the assembly easier, and will help to prevent personal injury and to insure parts
are not damaged during the assembly process.
2. Before beginning, please check the packing materials carefully for small parts which may have come loose inside the carton during shipping. Please do not discard any packing material
until all parts have been located. If any parts are missing, please contact your dealer for prompt replacement.
3. To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for stain residues and rough surfaces and also check for staples or nails left after removing the
packing materials. The manufacturer will not be held responsible if preventive steps are not taken prior to installation.
4. Please do not over tighten screws or bolts. During normal use everyday, screws, bolts, nuts and wooden plugs may loosen up. They should be periodically inspected and re-tightened to
prevent damage to the furniture and (or) personal property or cause injury. Always check to be sure all hardware on this list and the below mentioned components are attached to the
furniture properly and kept tightened.
5. Please lay all parts and hardware on a non abrasive surface such as a carpet, and follow the assembly steps.
Remove the
plastic cover from
the Bolts.
Plastic cover
A
B
A
B
Place table top (A) flat down on a soft surface
such as a carpet. Attach four legs (B) to the
table top (A) as shown on the diagram.
ASSEMBLY INSTRUCTIONS
2 OF 2
Step 2
Assembly Completed !!..
Remove the
plastic cover from
the Bolts.
Plastic cover
A
B
B
B
B
B
A
Turn the table to the upright position
to complete.
Loading...