Page 1
KELLER
Interface Converter
keller-druck.com
Page 2
USB
Kabeloption 4
C)
Cable option 4
2
K-404 T
Product No.
309010.0103
K-114 M
Product No.
309010.0077 (EU)
K-114 C
Product No.
309010.0078
Product No.
309010.0079
K-114 AC
X-Line with cable
Cable option 1
D-Line (I
DCX-18 ECO
Supply Unit
included in
309010.0093 (UK)
309010.0094 (US)
Mano Gauge
Mano Record
LP, MP, HP
DCX-25
X-Line
(on board)
Cable option 3
K-103 A
Product No.
309010.0002
DCX-16
DCX-22
DCX-25 PVDF
DCX-38
LEO Record
LEX 1
ARC-1/GSM-2
LPX, MPX, HPX
keller-druck.com
| www.
K-102 I
Product No.
309010.0012 (EU)
309010.0023 (UK)
309010.0024 (US)
X-Line
with cable
Supply Unit
included in
delivery
delivery
LEO 1, LEO 2, ECO 2
(on board)
Cable option 4
on board:
Connector plug inside the device or on
the PCB
RS232
info@keller-druck.com
K-102
K-107
DCX
LEO Record
Castello
dV-2 PS
Cable option 5
LEX 1
Cable option 7
X-Line
Product No.
309010.0004
Product No.
309010.0003 (EU)
309010.0020 (UK)
309010.0021 (US)
X-Line with
X-Line
with MIL-plug
Cable option 8
with cable
Binder-plug
LEO 3
dV-22 PP
Cable option 9
Supply Unit
included in
delivery
X-Line
with M12-plug
LEO 1, LEO 2, ECO 2
(on board)
Cable option 4
Accessories
Supply Units
USAUK AutoEU
K-102 I
K-114 / (A) / (B) / (M) / (AC) / (C)
|
+41 52 235 25 25
|
CH-8404 Winterthur
|
K-114 B
Product No.
309010.0076
K-114 A
Product No.
309010.0075
K-114
Product No.
309010.0074
X-Line with
Binder-plug
LEO 3
DCX-16
DCX-22
DCX-25 PVDF
DCX-38
X-Line
with cable
dV-22 PP
LEO Record
LEX 1
ARC-1/GSM-2
LPX, MPX, HPX
BLUETOOTH
LEO 1, LEO 2, ECO 2
(on board)
Product No.
309010.0120
X-Line with
Product No.
309010.0101
DCX-16
Product No.
309010.0119
X-Line
K-114 BT K-114 BT A K-114 BT B
Binder-plug
LEO 3
dV-22 PP
DCX-22
DCX-25 PVDF
DCX-38
LEO Record
with cable
LEX 1
ARC-1/GSM-2
LPX, MPX, HPX
LEO 1, LEO 2, ECO 2
(on board)
St. Gallerstrasse 119
Druckmesstechnik |
KELLER AG für
X-Line (RS485, excl. Xi-Line versions with SDI-12 and
Xc-Line with CANopen): e.g. Series 33 X, Series 35 X,
Series 36 X W, Series PD-39 X, Series 41 X, Series 46 X)
Page 3
Picture Name Description Application Product No.
(KELLER devices)
USB ➞ RS485
K-114
Interface converter with screw-type
terminal:
∙ Supply via USB for one connected final
consumer
(U-Out = 11,8 VDC / I-Out
(Supply is provided via an external power
supply unit (12–20 VDC) if more than one
final consumer is connected)
∙ Measuring the signal voltage applied
(0…12 VDC)
(Attention: V-IN not connected to screw-type
terminals)
∙ Measuring the power consumption of end
users (0…150 mA)
∙
Visual status and configuration display (LED)
∙ Total length cable: 1 m
∙ Galvanic isolation (to USB, not to the
external power supply)
∙ Selective activation of echo, bias resistors or
a terminating resistor
∙ Software CD and USB connection cable
included in the scope of delivery
= 40 mA)
max
X-Line
with cable
309010.0074
K-114 A
K-114 B
K-114 V Customised,
Interface converter with Fischer-plug/
5-pin:
∙ Same specifications as the K-114
∙ Total length cable: 1,75 m
Interface converter with Binder socket
series 680/5-pin:
∙ Same specifications as the K-114
∙ Total length cable: 1,75 m
∙ Same specifications as the K-114
∙ Total length cable: 1,75 m
∙ For mounting of an individual plug
3 │ Overview Converter
DCX-16
DCX-22
DCX-25 PVDF
DCX-38
LEO Record
LEX 1
ARC-1/GSM-2
LPX, MPX, HPX
X-Line
LEO 3
dV-22 PP
ready to use
X-Line
309010.0075
309010.0076
309010.0132Interface converter with open cable head
Page 4
Picture Name Description Application Product No.
(KELLER devices)
USB ➞ RS485
K-114 M
Interface converter with M12 socket/5-pin:
∙ Same specifications as the K-114
∙ Total length cable: 2,3 m
∙ Supply/charging via USB
(U-Out = 5 V / I-Out
(Fast charging from external power supply
unit, 12–20 VDC) included in the scope of
delivery
= 100 mA)
max
DCX-18 ECO
EU:
309010.0077
UK:
309010.0093
USA:
309010.0094
K-114 AC
K-114 C
K-404 T
Interface converter with Binder plug series
712/5-pin:
∙ Same specifications as the K-114
∙ Total length cable: 1,75 m
USB ➞ TTL
Interface converter with Binder plug series
712/2-pin:
∙ Same specifications as the K-114
∙ Total length cable: 1,75 m
USB ➞ I2C
Interface converter with 5-pin
TO-socket (on glass feedthrough)
∙ Supply via USB for one connected final
consumer
(U-Out = 3,3 VDC / I-Out
∙ Internal Pull-up resistances to SDA and
SCL, EOC not connected
∙ Short-circuit proof, no galvanic isolation
∙ Total length cable: 25 cm
∙ Software CD included in the scope of
delivery
= 50 mA)
max
DCX-25
Old device
versions:
Mano Gauge
Mano Record
LP, MP, HP
D-Line
(e.g. 4 LD…9 LD)
309010.0079
309010.0078
309010.0103
4 │ Overview Converter
Page 5
Picture Name Description Application Product No.
(KELLER devices)
Bluetooth ➞ RS485
K-114 BT
Interface converter with screw-type
terminal:
∙ Bluetooth communication – RS485 /
USB – RS485 (half-duplex)
∙ Supplying the connected devices
(U-Out = 15 VDC / I-Out
∙ Measuring the signal voltage applied
(0…12 VDC)
∙ Measuring the power consumption of end
users (0…150 mA)
∙ Visual status and configuration display
(LED)
∙ Selective activation of echo, bias resistors or
a terminating resistor
∙ Software CD and USB connection cable
included in the scope of delivery
∙ The battery is charged via the USB interface
= 150 mA)
max
X-Line
with cable
309010.0119
K-114 BT A
K-114 BT B X-Line
K-114 BT V Customised,
Interface converter with Fischer-plug/
5-pin:
∙ Same specifications as the K-114 BT
series 680/5-pin:
∙ Same specifications as the K-114 BT
∙ Same specifications as the K-114 BT
∙ For mounting of an individual plug
DCX-16
DCX-22
DCX-25 PVDF
DCX-38
LEO Record
LEX 1
ARC-1/GSM-2
LPX, MPX, HPX
LEO 3
dV-22 PP
ready to use
X-Line
309010.0101
309010.0120Interface converter with Binder socket
309010.0131Interface converter with open cable head
5 │ Overview Converter
Page 6
Picture Name Description Application Product No.
(KELLER devices)
RS232 ➞ RS485
K-102
f
Converter with screw-type terminal:
∙ Converts RS232 to RS485 half-duplex
∙
RS232-connection: 9-pin D-Sub-plug (f)
∙ RS485-connection: 3-pin screwable plug
clamp (RS485 A, RS485 B, GND)
∙ Automatic switching between send/receive
∙ Baud rates: 9,6 kbit / 115 kbit
X-Line
with cable
309010.0004
f
m f
f f
f = female │ m = male
K-102 I
K-103 A DCX-16
K-107 X-Line
Converter (isolated) with screw-type
terminal:
Same as K-102, but:
∙ Galvanic isolation
∙ Power plug for external transmitters
(V+, GND) and supply of K-102 I
∙ Power supply (15 V) is required and is
provided with the converter
∙ RS232 extension cable (1,8 m) included in
the scope of delivery
series 103:
Same as K-102, but with cable (length: 2 m)
and Fischer socket Series 103
Converter with Binder socket
series 680/5-pin:
Same as K-102, but includes:
∙ transmitter supply from integrated 9 Volt
battery or external power supply
∙
RS232-connection: 9-pin D-Sub-plug (f)
∙ RS485-connection: Binder-plug Series
723 5-pin (f)
∙ Total length cable: 0,75 m
∙ power supply (15 V) is provided with the
converter
X-Line
with cable
DCX-22
DCX-25 PVDF
DCX-38
LEO Record
LEX 1
ARC-1/GSM-2
LPX, MPX, HPX
LEO 3
dV-22 PP
Europe:
309010.0012
UK:
309010.0023
USA:
309010.0024
309010.0002Converter cable with Fischer socket
Europe:
309010.0003
UK:
309010.0020
USA:
309010.0021
6 │ Overview Converter
Page 7
Picture Name Description Accessories for Product No.
Converter Accessories
m
Cable option 1
Cable adapter (0,4 m) Binder plug series
680/5-Pol (m) to strand clips
∙ Transmitters with cable output can be
connected e.g. 36 XW
K-114 BT B
K-114 B
K-107
309010.0014
Cable option 3
f
f
m
Cable option 4
f
Cable option 5
m
Cable option 6
f f
Cable option 7
Cable adapter
680/5-Pol (m) to 6-pin Molex socket (f)
Cable adapter (1,5 m) cable to 2-pin socket
∙ Connection to LEO 1, LEO 2 and ECO 2
Cable adapter (0,4 m) 5-pin Binder plug
series 680/5-Pol (m) to 8-pin Binder cable
socket series 423 (f)
∙ Suited for dV-2 PS and Castello
Cable adapter (0,4 m) 5-pin Fischer socket
series 103 to 5-pin M12
∙ Connection to DCX-18
Adapter (0,4 m) from Binder plug series
680/5-Pol (m) to Fischer plug series 103/
5-pin (m)
∙ Suited for DCX, LEO Record, LEX 1
(0,4 m)
Binder plug series
K-114 BT B
K-114 B
K-107
K-114 BT
K-114
K-102
K-102 I
K-114 BT B
K-114 B
K-107
K-114 BT A
K-114 A
K-103 A
K-114 BT B
K-114 B
K-107
309010.0016
309010.0017
309010.0041
309010.0066
309010.0082
f = female │ m = male
Cable option 8 K-114 BT B
series 680/5-Pol (m) to 6-pin MIL C-26482
∙ Connection of transmitters with Souriau
plug e.g. 33 X
7 │ Overview Converter
K-114 B
K-107
309010.0123Cable adapter (0,4 m) from Binder plug
Page 8
Picture Name Description Accessories for Product No.
Converter Accessories
Cable option 9
Cable adapter (0,4 m) from Binder plug
series 680/5-Pol (m) to Binder M12/A coded
∙ Suitable for X-Line transmitter with M12 plug
K-114 BT B
K-114 B
K-107
309010.0127
f = female │ m = male
Supply Unit
Europe
Supply Unit
UK
Supply Unit
USA
Supply unit 15 V – Europe
∙
DC-Socket
∙
Input: 230 VAC
∙
Output: 15 VDC, 360 mA
∙
Cable length 1,8 m
Supply unit 15 V – UK
∙
DC-Socket
∙
Input: 230 VAC
∙
Output: 15 VDC, 360 mA
∙
Cable length 2 m
Supply unit 15 V – USA
∙
DC-Socket
∙
Input: 120 VAC
∙
Output: 15 VDC, 360 mA
∙
Cable length 2 m
K-114
K-114 A
K-114 B
K-114 M
K-102 I
K-107
K-114
K-114 A
K-114 B
K-114 M
K-102 I
K-107
K-114
K-114 A
K-114 B
K-114 M
K-102 I
K-107
309010.0025
309010.0087
309010.0086
8 │ Overview Converter
Page 9
Picture Name Description Accessories for Product No.
Converter Accessories
Car
Adapter Cable
Car adapter cable
∙ Cable length 2 m
K-114
K-114 A
K-114 B
K-114 M
K-102 I
K-107
309010.0051
Software CD
USB Cable
KELLER Software CD
includes all KELLER-Softwares and USBdriver for K-114 / K-104 / Manometer
Software CDs are delivered with every
converter and converter cable.
Download for free:
www.keller-druck.com
USB Cable (1 m)
∙ Connection: A Mini / B
Alle Konverter
K-114 BT
K-114 BT A
K-114 BT B
K-114
K-114 A
K-114 B
K-114 C
K-114 AC
K-114 M
LEO 5
750505.0001
309010.0095
9 │ Overview Converter
Page 10
The following interface converters and options are no longer required or have been
superseded by new products. To ensure compatibility with older KELLER products,
some of them can still be supplied:
Picture Name Description Accessories for / Product No.
Application
(KELLER devices)
Converter Accessories
Cable option 2
mf
Cable adapter Binder plug Series 723 (m) to
5-pin Leoco socket
K-104 B
K-107
309010.0015
m
f
f = female │ m = male
f
f
Handheld
Adapter
K-101
K-103
Handheld Adapter
The Handheld Adapter is required to
connect a handheld (Palm) with an
interface converter.
RS232 ➞ TTL
Converter cable (2 m) with 2-pin Binderconnector Series 712
RS232 ➞ RS485
Converter cable with Binder socket
Series 723
K-104 B
K-107
Intelligent
Manometers (IM)
and Calibrators
DC-22 G
(ø 46 mm)
309010.0015
309010.0001
309010.0054
10 │ Overview Converter
Page 11
Plug Assignment of the interface converters – front view / Plug Assignment of the cabel options – front view
K-114 A
K-114 BT A
K-114 B
K-114 BT B
K-114 AC
K-114 C
Power supply unit socket K-114
Fischer Series 103/5-pin (m)
Binder Series 680/5-pin (f)
Binder Series 712/5-pin (m)
Binder Series 712/2-pin (m)
3: +Vcc
2: V-IN
1: GND
4: RS485-A
5: RS485-B
3: +Vcc
2: V-IN
1: GND
4: RS485-A
5: RS485-B
3: n.c.
4: RS485-A
2: n.c.
5: RS485-B 1: n.c.
1: GND
2: TTL
+VCC GND
K-404 T
Cabel option 1 Binder Series 723/5-pin (m) Strand clips
4: RS485-A
5: RS485-B
f = female │ m = male │ n.c. = not connected
TO-5 (f)
3: +Vcc
2: V-IN
1: GND
11 │ Overview Converter
SUP
SDA
EOC
SCL
GND
black bk: +Vcc
white wh: GND
yellow ye: RS485-B
blue bl: RS485-A
red rd: V-IN
Page 12
Plug Assignment of the cabel options – front view
Cabel option 3
Cabel option 5
Cabel option 7
Cabel option 8
Binder Series 723/5-pin (m)
3: +Vcc
4: RS485-A
5: RS485-B
Binder Series 723/5-pin (m)
3: +Vcc
4: RS485-A
5: RS485-B
Binder Series 723/5-pin (m)
3: +Vcc
4: RS485-A
5: RS485-B
Binder Series 723/5-pin (m)
3: +Vcc
4: RS485-A
5: RS485-B
2: V-IN
1: GND
2: V-IN
1: GND
2: V-IN
1: GND
2: V-IN
1: GND
Molex socket 6-pin (f)
+Vcc
V-IN
n.c.
GND
Binder Series 423/8-pin (f)
2: V-IN
4: +Vcc
1: n.c.
8: GND
6: n.c.
Fischer Series 103/5-pin (m)
3: +Vcc
2: V-IN
1: GND
MIL C-26482 (f)
RS485-B
A
F
B
C
E
D
n.c.
RS485-A
RS485-B
RS485-A
5: RS485-A
3: n.c.
7: RS485-B
4: RS485-A
5: RS485-B
+Vcc
V-IN
GND
Cabel option 9
4: RS485-A
5: RS485-B
f = female │ m = male │ n.c. = not connected
Binder Series 723/5-pin (m) M12/5-pin (f)
3: +Vcc
5: RS485-B
3: +Vcc
2: V-IN
1: GND
2: V-IN
12 │ Overview Converter
4: RS485-A
1: GND
Loading...