KEK WALLPAPER CIRCLE Instruction Manual

NON-WOVEN WALLPAPER

INSTRUCTIONS

WALLPAPER CIRCLE - ø 142.5 C M

Step 1

Before you start, make sure the wall is suitable for this

type of wallpaper (non-woven). The surface must be

dry, clean, smooth, stable, evenly absorbent, and of

uniform colour with no old paint or rust showing

through. Also make sure to remove any old nails or

screws.

Step 2

The three sheets of your wallpaper circle are already cut

in the shape of a circle. Place them on the floor in the

correct order to check out the full image.

Step 3

We recommend ‘Ready & Roll for non-woven wallpaper’

by Perfax, or similar wallpaper glue from other brands.

Apply the glue on to the sheets (one by one) with a glue

roller. Use a spirit level to make sure the first sheet

hangs completely straight.

Start with sheet number 1 and place the sheet left from

the spirit level.

Step 4

Then place sheet number 2 and 3 to complete the

circle. After each sheet, use a wallpaper spatula to

make sure there are no air bubbles.

Step 5

Carefully pat away excess glue with a piece of kitchen

paper. Be extra careful with dark colours! Because the

wallpaper is ‘uncoated’ (no protective layer) the ink can

come off slightly.

It is important to avoid excessive heat or draughts when

hanging and drying wallpaper, otherwise the wallpaper

dries too quickly and this can lead to gapping at seams.

Specifications and Main Features