Instruction Manual
PAPER SHREDDER
Model: KESC7LTBK
Please read the following instructions carefully before using,
and keep it for future use.
1/ 6
KEJI Warranty 12 months
Product Warranty-valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work
as intended for 12 months from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the
Warranty Period, Officeworks will, as its election and at its expense, repair or
replace the product.
This warranty does not apply:
to cosmetic damage;
to damage caused by consumables used in connection with the
product(such as shredder oil)
where the product hasnot been u
sed in accordance with all provided
instructions
to damage arising from fair wear and tear
where the product has not been subject to reasonable use
where the product has been intentionally or negligently damaged
and/or
if the customer has atempted to repair the product.
To make a claim under his warranty, please return your product with your
receipt or proof of purchase to your nearest Officeworks store or contact 1300
633 423.
This warranty is provided in addition to any rightsyou may b entitled to under
the Competitions & Consumer Act 2010.
Our goods come with guaantees tha
t cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably freseeable loss and damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
Officeworks Ltd. I 236-262 East Boundary Road I Bentleigh East VIC 3165 I AUSTRALIA
Know Your Appliance
Paper entry
Shredder head
Waste bin
Using Your Shredder
select switch
AUTO: machine is ready to work
OFF: the machine will stop working
REV: the machine will reverse paper
when you place the switch on this position
Power cord
SETTING UP THE SHREDDER
1. Remove the shredder from its carton and unwind the cord to its full length.
2. Place the waste bin on a firm level surface in a stable upright position.
3. Take the main shredder unit and put it onto the waste bin.
4. Make sure the function switch is in the “OFF” position.
5. Connect the plug to the 220-240V AC mains.
AUTO MODE
1. To use this mode, turn the function switch to AUTO .
“ ”
2. Feed the paper into the paper throat, the shredder will operate to shred the paper.
3. Once all the papers have been shredded, it will stop itself.
OFF MODE
1. To switch the shredder off, turn the function swi
tch to the OFF position.
“ ”
REVERSE MODE
1. To switch this shredder to this mode, switch the function switch to REV position.
“ ”
2. The cutting blade in the shredder will run in the reverse direction.
PAPER JAM
1. Turn the function switch to REV position to let the cutting blade run in the
reverse direction. The paper will reverse out from the throat.
2. Pull out the paper carefully to clear the throat.
3. Once the jammed paper is removed, turn the function switch to AUTO positon
for normal operation.
DISPOSE OF WASTE
1. Ensure power is off at mains.
2. Dispose of shredder waste.
3. Re-assembl
MOTOR OVER-HEAT SAFETY DEVICE
Your shredder is fitted with a safety device that switches off in the unit in event of an
overload. During an overload situation, the unit will stop automatically, and the
overheat protection indicator will light up. Turn the unit off and unplug from mains.
Allow the motor to cool down to room temperature before resuming operation.
unit fails to operate or the safety device switches the unit off again, return the unit.
e shredder correctly before shredding.
“ ”
“ ”
If the
Product Specifica tion
Model:
Dimension:
Net weight:
Paper entr y width:
Duty cycle:
Waste bin volume
Shred paper capacity:
Shred size:
Noise level:
Voltage:
Current:
KESC7LTBK
315× 148× 228mm
1.215kg
217mm
2min ON 45min OFF
7 Litre
5 sheets(A4 80gsm)
7mm
73 dB approximately
220-240V~ 50Hz
0.5A
Cleaning
The paper sh redder requir es regular cleaning.
1. Before cl eaning ensure p ower is switched off at mains and plug has been removed.
. Clean the ou ter surface wit h a soft damp cloth only.
2
3. Ensure th e unit is dry befor e connect to the mains.
KESC7 LTBK
Important Safety Warnings
When using the electrical appliances, basic safety precautions should alwa ys be
observed including the following:
-Read all the instructions carefully before using.
-To protect against electric shock, do not immerse the machine in water or any other
liquid.
-Do not operate the appliance with a damage cord or plug of after the appliance
malfunctions, or has been damaged in any manner. Return the appliance to the
nearest authorized service center.
-Remove any pins or paper clips from paper before shredding.
-Do not shred film, label paper, clothing or plastic.
-No
t intended for use by children.
-Always operate shredder on flat surface.
-A full waste bin may lead to paper jam, empty waste bin before it is full.
-Retain this instruction manual for further reference.
WARNING
Keep children away from the
Safety First.
machine. This machine should be
operated by adults only.
Please take out the staples
on your paper before shredding.
Never insert fingers into the opening.
Please keep your hair far away
from the shredder.
Please do not shred carbon paper,
thermal paper, wet paper, adhesive
paper, newspaper, film, clothing or
plastic as it may cause ma
chine failure.
Please take out the clips on your
paper before shredding.
Please keep soft cloths, ties far
away from the paper entry.
Please do not spray onto or shred
near any flammable materials as
it may cause a fire. Shred in a well
ventilated area.
Operation, maintenance, and service
requirements are covered in th
instruction manual. Read the entire
instruction manual before operating
shredders.
Shredder will stop shredding after a period of continuous use.
Wait for shredder to cool down before trying again.
Check product instructions for run times.
5/ 6
e
6/ 6
Loading...