Selector Guide
Plug-In Modules for 2700, 2701, 2750
Integra Mainframes
Module Selector Guide
This selector guide may prove helpful in identifying the best module for a specific application. Install up to
five modules at a time in the Model 2750 mainframe or two modules in the Model 2700 or 2701 mainframe.
Module Inputs Configuration Connector Voltage Current Bandwidth Life Speed Other
7700 20 Multiplexer 1×20 or Screw 300 V 1 50 MHz 10
7701 32 Multiplexer 1×32 or D-sub 150 V 1 A 2 MHz 10
7
7703 32 Multiplexer 1×32 or D-sub 300 V 500 mA 2 MHz 10
7705 40 Independent N/A D-sub 300 V 2 A 10 MHz 10
7706 20 Multiplexer 1×20 or Screw 300 V 1 A 2 MHz 10
7707 10 Digital I/O/ 1×10 or D-sub 300 V 1 A 2 MHz 10
7708 40 Multiplexer 1×40 or Screw 300 V 1 A 2 MHz 10
7709 48 Matrix 6×8 D-sub 300 V 1 A 2 MHz 10
7710 20 Multiplexer 1×20 or Removable 60 V 0.1 A 2 MHz 10
Use with Integra Series mainframes: 2700, 2701, 2750
7711 8 Multiplexer Dual 1×4 SMA 60 V 0.5 A 2 GHz 10
7712 8 Multiplexer Dual 1×4 SMA 42 V 0.5 A 3.5 GHz 10
* Can be disconnected from internal DMM for routing external signals
# Analog Type of Max. Switched Contact Switch
w/CJC two 1×10 terminals 2 current measure channels.
two 1×16
702 40 Multiplexer 1×40 or Screw 300 V 1 A 2 MHz 10
SPST
w/CJC
Multiplexer two 1×5 Maximum power = 125VA.
w/CJC two 1×20 terminals
w/CJC two 1×10 screw 500 channels/second scan rate.
two 1×20 terminals 2 current measure channels.
t
wo 1×16
two 1
×10
terminals
terminals
Max.
8
3 ms Maximum power = 125VA.
8
3 ms Maximum power = 125VA.
8
3
ms Maximum power = 125VA.
8
1 ms Reed relays.
8
3 ms Maximum power = 125VA.
8
3 ms 2 analog outputs.
8
3 ms 32 digital I/O.
8
3 ms Maximum power = 125VA.
8
3 ms Connects to internal DMM.
10
0.5 ms Solid state relays, 60V max.
6
10 ms Insertion loss <1.0dB @ 1GHz.
6
10 ms Insertion loss <1.1dB @ 2.4GHz.
16 digital outputs.
Maximum power = 125VA.
Daisy chain multiple cards
for up to a 6×40 matrix.
Maximum power = 125VA.
VSWR <1.2 @ 1GHz.
egra Plug-In Module Accessories
Int
Module Connector Type Supplied Accessories Available Accessories
7700
7701
7702
7703
7705
7706
7707
7708
7709
7710
7711
7712 SMA — 7712-SMA-N adaptor, 7712-SMA-1 & S46-SMA-0.5,-1 SMA cables
1.888.KEITHLEY
DIGITAL MULTIMETERS & SYSTEMS
Oversized Screw Terminal Strain Relief
50-pin female D
Oversized Screw T
wo 50-pin female D
T
wo 50-pin female D
T
Screw T
50-pin male D
Oversized Screw T
50-pin female D
Quick Disconnect Screw T
SMA
-sub & 25-pin female D-sub 7789 connector kit
erminal
-sub
erminal
-sub
-sub & 25-pin female D
erminal
-sub & 25-pin female D
erminal
(U.S. only)
-sub
-sub
www.keithley.com
Strain Relief
7788 connector kit
7788 connector kit
Strain Relief
7790 connector kit
Strain Relief
7790 connector kit
Strain Relief
—
A GREATER MEASURE OF CONFIDENCE
7401 T/C wire
7790 connector kit, 7705-MTC
—
-2 cable
7705-MTC
-2 cable
7705-MTC
7401 T/C wire kit
7789 connector kit, 7705-MTC
7401 T/C wire kit
7789 connector kit, 7705-MTC
7401 T/C wire kit
-SMA & 7712-SMA-N adaptors, 7712-SMA-1 & S46-SMA-0.5,-1 SMA cables,
7711-BNC
7051-2,-5,-10 BNC cables
-2 & 7707-MTC
-2 & 7707-MTC-2 cables
-2 & 7707-MTC-2 cables
-2 cables
Loading...