Model 192 ~Programmtible DMM.‘:’ ~~~Specifi&i$$
-.
MODEL 1923 IEEE-488 INFERFACE SPECIFICATIONS
I. IEEE-,9‘%1978 BUS IMPLEMENTATION:
MuNOln. Cmmmnd,; DCL. SDC. GET. 1.1.0. CT,.. WT. WI..
WE. SPD.
fs*trst modn for DC ““Il. an:
USEABLE INT;;WM;ON TRIGGER TO
RESOLUTION FIRST BYTE OUT
a’%-d,@ &..cy: *,.o,S% + Id) for 1 year o” DC” and Ohm.
(below xXWklll.
Addrm Modn: TALK ONLY and ADDRESSABLE,
IL STATUS PORT:
FRONT PANEL PROGRAMS
PROGRAM NAME
DESCRlF’TlON
.
192 Spec Addenda
The following infornlation is supplied as clarification of 192 specifications.
1. NMRR. To prevent AD saturation, peak AC t OC value lwst be less than full
scale on any range.
2. IEEE low to power line ground isolation is Ibin.
3. Foutijterminal lead resistance: Maximum per lead for additional 1 digit
errw at 5-l/2 digits.
Resistance
1%
22 n
70 n
220 a
700 a
2200 0
4. Input current. With 1Mh shunt on 2V range, display should be less than
5 digits (<SIpA) at TA =
23% (use filter program 2).
Loading...