keilhauer Cona, Unity User Manual

Cona

1450 Birchmount Road, Toronto, Ontario, Canada M1P 2E3

tel [phone] fax [phone] 724 5665

www.keilhauer.com [e-mail]

©COPYRIGHT KEILHAUER 2012

1. Seat Height Adjustment (while seated)

Use the paddle shaped lever on the right side underneath the seat

To rai se lift your weight off the seat while lif ting the front of the lever

To lowe r sit on the seat while lifting the front of the lever

Use this

(to raise or

lower seat)

Use this

(to lock or unlock

backward tilt)

Use this

(to increase or

decrease tension)

2. Tilt Tension

3. Tilt Lock (while seated)

Use the adjustment knob at the end of the height adjustment lever

To in creas e tension slide the knob out and turn the knob clockwise.

Slide knob back into place.

To dec re as e tension slide the knob out and turn the knob counter-

clock wise. Slide knob back into place.

Use the paddle shaped lever on the lef t side underneath the seat

To unlock tilt pull the front of the lever up and tilt back slightly

To lock tilt recline to your desired position and push the front of

the lever down