Issue department：Bedding Division
Date：
2019-10-9
Product Function
instruction
Author：
Beck
No：RF378C
Version：
1.0
Page 1 of 4
USER MAUNAL
Function instruction
1. Electrical configuration diagram：
Massage head
Head lift
Memory4
FLAT
RF378C
Massage time
Massage foot
Zero-G
Foot lift
Memory3
Memory 2
Zero-G
Head lift
FLAT
RF378A
Zero-G
Foot lift
Head lift
Memory4
FLAT
1
Foot lift
Memory3
Memory 2
RF378B
Issue department：Bedding Division
Date：
2019-10-9
Product Function
instruction
Author：
Beck
No：RF378C
Version：
1.0
Page 2 of 4
USER MAUNAL
2. Process of test
2.1 Head Lift +
Press and maintain, head lift stretches out
2.2 Head Lift -
Press and maintain, head lift retracts
2.3 Foot Lift +
Press and maintain, foot lift stretches out
2.4 Foot Lift -
Press and maintain, foot lift retracts
2.5 FLAT
Press and release the FLAT button on remote，the head and foot actuators moves to lower position(when the
actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when
press any buton；
2.6 Zero-G
Release after press, 2 lifts move to Zero-G position
2.7 Memory2
Release after press, 2 lifts move to Memory4 position
2
Issue department：Bedding Division
Date：
2019-10-9
Product Function
instruction
Author：
Beck
No：RF378C
Version：
1.0
Page 3 of 4
USER MAUNAL
2.8 Memory3
Release after press, 2 lifts move to Memory3 position
2.9 Memory4
Release after press, 2 lifts move to Memory4 position
2.10 Massage head
Turn on massage head
2.11 Massage foot
Turn on massage foot
2.12 Massage time
Press the Massage time key will turn on the massage and choose timing for 10min-20min-30min-off
2.13 Pairing
Press Head Lift + and Foot Lift + key for more than 1 second, the remote will enter pairing mode and a B_ LED
will flash. Release this key to stop pairing .After the pairing is successful, B_LED will stop flashing.
FCC Warning：
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
3
Issue department：Bedding Division
Date：
2019-10-9
Product Function
instruction
Author：
Beck
No：RF378C
Version：
1.0
Page 4 of 4
USER MAUNAL
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.The device has been evaluated to meet general RF exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac
un autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition
aux rf.
4
RF378C
FCC ID: 2AK23CU3582P
IC: 22406-CU3582P
FCC ID: 2AK23RF378AC
IC: 22406-RF378AC
Loading...