Issue Departme
nt：Bedding Division Date：
2017-8-15
Head up
FLAT
Foot up
Instruction of RF377B
1. Electricalconfigur
System Inst
ruction
Instruction of RF377B
ationdiagram：
Foot down
Author：
n：
Editio
Page 1 of 2
1.1
Head down
RF377B
Zero-G
RF377A
1/3
Issue Department：Bedding Division Date：
2017-8-15
2. Item
2.1 Head up
Press and hold
released
；
2.2 Head down
System Instruction
Instruction of RF377B
Author：
Edition：
Page 2 of 2
1.1
HEAD UP button of remote, head actuator moves out, stop when
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
2.3 Foot up
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
2.4 Foot down
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head
andfoot actuators start moving;
2.5 Flat
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat；
2.6 ZeroG
Releaseafterpress,2liftsmovetoZero‐Gposition
2/3
Issue Department：Bedding Division
Date：
2017-8-15
System Instruction
Instruction of RF377B
Author：
Edition：
1.1
Page 2 of 2
FCC：
Any Chang
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1
(2) this de
undesired operation.
es or modifications not expressly approved by the party responsible for compliance
) This device may not cause harmful interference, and
vice
must accept
any interference receiv
ed, including interference that may cause
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-
exempt RSS standard
not
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.The device has been evaluated to meet general RF exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un
autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux
rf.
interference, and (2) this device must accept any interference, including interference that
cause
(s). Operation is subject to the following two condition
s: (1) this device may
3/3
Massage motor
FCC ID: 2AK23RF377AB
IC: 22406-RF377AB
Power cord AC
FCC ID: 2AK23MC122
IC:22406-MC122
Power Supply
control box
Foot Motor
Head Motor
Loading...