Keeson Technology RF358B Users Manual

Issuing Department：Bedding

Division

Date：

2016-11-28

Function Test

Instructions

Author：

Jarek

Model：RF358B

Function Test Instructions of JLDK.33.03.14

Edition：

1.0

Page 1 of 7

Function Instructions of JLDK.33.03.14

Massage mode 3

LED for massage mode

Massage mode 2

Massage mode 1

Foot massage intensity adjusting

Head massage intensity adjusting

Head actuator adjustment

Foot actuator adjustment

Massage mode all on/off

Zero G

Memory III

Memory I

UBB

Memory II

Flat

1. Product description

Made by: Jarek Checked by: Confirmed by:

1 / 7

Issuing Department：Bedding

Division

Date：

2016-11-28

Function Test

Instructions

Author：

Jarek

Model：RF358B

Function Test Instructions of JLDK.33.03.14

Edition：

1.0

Page 2 of 7

2. Function description

1.1. LED flashes when power on

Power supply by control box, PAIRINGLED of control box turns off after flashes for 4 times , and

POWER LED turns on.

1.2. Paring code

Process of paring code:
Double click RESET button on control box，pairing LED turns on，The control box enters the mode

of code paring;

Press and hold the code paring button under battery cover, the backlight of paring LED flashes,

and the backlight of remote flashes, the remote enters into mode of code paring;

The backlight of paring LED stops flashing and the paring LED of control box turns off, it indicates

that the code paring is successful;

If fails, repeat all the steps above;

1.3. Head actuator moves out

Press and hold the head up button, head actuator moves out, stop when released;

1.4. Head actuator moves in

Press and hold the head down button, head actuator moves in, stop when released;

1.5. Foot actuator moves out

Press and hold foot up button, foot actuator moves out, stop when released;

1.6. Foot actuator moves in

Press and hold foot down button, head actuator moves in, stop when released;

Made by: Jarek Checked by: Confirmed by:

2 / 7

Issuing Department：Bedding

Division

Date：

2016-11-28

Function Test

Instructions

Author：

Jarek

Model：RF358B

Function Test Instructions of JLDK.33.03.14

Edition：

1.0

Page 3 of 7

1.7. Underbed lighting

Click underbed lighting button, turn on (or turn off) the undered lighting, it switches its status

once when click the button every time;

1.8. FLAT function

Click FLAT button, head and foot actuators move to the lowest position(when the actuators are

free, you can stop the massage motor, turn off the massage motor LED), running can be stopped

by clicking any button;

1.9. ZERO G position

Click ZERO G button, head and foot actuators move to the memory position which is preset,

running can be stopped by clicking any button;

1.10. ANTISNORE position

Click ANTISNORE button, head and foot actuator actuators move to the memory position

which is preset, running can be stopped by clicking any button;

1.11. LOUNGE position

Click LOUNGE button, head and foot actuators move to the memory position which is

preset, running can be stopped by clicking any button;

1.12. TV position

Click TV button, head and foot actuators move the memory position which is preset, running

can be stopped by clicking any button;

Made by: Jarek Checked by: Confirmed by:

3 / 7