Kee Safety SGNA033GV User Manual

RELIABLE SAFE ACCESS

Kee Gate Operation & Maintenance Manual

2

Kee Gate System Overview

KEE SAFETY’S SAFETY GATES

KEE GATE is a complete range of safety gates designed
specifically to provide permanent hazard protection for internal
or external applications.

KEE GATE can provide permanent protection for any openings,
ladder/stair access points, roof hatches and restricted areas,
where regular access for maintenance & inspection is required.
The gate has been specifically designed to provide a “retro-fit”
solution to existing fixed structures where opening protection is
required. The U-bolt connection allows the gate to be connected
to posts from 33.7 – 48.3mm (1” – 1.5” USA version).

APPLICATION

KEE GATE has been designed to be fully adjustable and can
accommodate openings up to 1m (30” – 39”).
Connecting the “KEE GATE ” to the supporting structure/post/
stringer is simple via using the U-bolt which can provide
connection around any flat, square or tubular stringer from

33.7 – 48.3mm (1” – 1.5”).

DURABILITY

KEE GATE is available in a range of high quality finishes.
Galvanised: components are supplied with a galvanised
finish to BS EN ISO 1461 and ASTM A53: Hot Dip Galvanised
Coatings Specification and Testing Methods, giving an average
coating of between 55-100 microns.
Aluminium: products are supplied to Grade 6082 T6, & T4,
Anodised Stainless Steel: products are supplied to Grade 316.

3

COMPONENT BASED SYSTEMS

All products consist of high quality tubing that seamlessly
compliments Kee Safety’s safety portfolio. KEE GATE mounts
easily to all variants of the KEE KLAMP & KEEGUARD systems
as well as Safe Access Solutions such as Mobile Access
Platforms & Static Access Platforms.

VERSATILE SYSTEMS

The KEE GATE range has been specially designed with U-bolt
clamps allowing the products to be mounted to the supporting
structure/post/stringer. This permits connection around any flat,
square or tubular stringer from 33.7 – 48.3mm (1” – 1.5”).

Kee Gate System Overview

TESTING & CERTIFICATION

Tested in accordance with the following (See Specification
Section for full details) :-

EN 13374 Class A.
EN ISO 14122 Part 3 & Part 4
OSHA
ANSI
Ontario Building Code, NBC and British Columbia Building
Code
Canadian Standards Association
Canada Occupational Health and Safety

LIFE CYCLE TESTING - BS 6375-2:2009 Clause 6.5 - Opening

and closing of Gate through 90 degrees.

SALT SPRAY TESTING - ASTM B117 - 11 - 55 Neutral solution
over 200 hours to assess performance of coating to resist
corrosion.

OFFICIAL DOCUMENTATION

All Systems comply with the following:­Work at Height Regulations.
HSG 33 “Health & Safety in Roof work”
HSE Construction Sheet No. 21 “Working on flat roofs
protection against falls.”
European Union Directives together with requirements of CDM
Regulations. USA & Canada.

AESTHETICS

The smooth lines of the standard galvanised finish can be
further enhanced by the application of powder coating to
EN 13438.
USA-AAMA 2603-2605.

4

SYSTEMS DISTRIBUTORS

KEE GATE is available as a supply and installation service or
component supply only. Products are available from Kee Safety
directly or one of its licensed distributors.