Kees AIR MIXERS User Manual

KEES, INC.

Products for Sheet Metal HVAC, Food Service, & Architectural Construction Industries

400 S. INDUSTRIAL DRIVE - P.O. BOX L - ELKHART LAKE, WISCONSIN 53020 - [phone] - FAX [phone]

Mixxer Section™Installation Guide

Mixxer Section Installation, Operation And Maintenance

Installation

The Mixxer Section is manufactured complete with Air Mixxer and anges to match stan-

dard air handlers. Gasketing between Mixxer Section and other air handling equipment
should be used to seal against air leakage. The Mixxer Section shall be match drilled in
the eld for proper t up to standard air handling equipment.

Operation

Once installed, the Mix

tions. The section utilizes a xed position Air Mixxer with no moving parts.

Maintenance

The Mixxer Section is constructed of 18 gauge galvanized iron with heavy gauge alu­minum (.080”) Air Mix
HVAC operation.

x

er Section, including Air Mix

x

er and does not require any special maintenance under standard

x

er, requires no operating instruc-

MSIG 02/96