This KeepGuard cam is the best-selling scouting camera which is designed for activity and is resistant against water and snow. It
is equipped with built-in infrared sensor, so that it can be triggered accurately by heat sources, then take high quality pictures or
video. Please refer to the notes below to ensure that you are completely satisfied with this product.
Quick Start 2
Notes before use 3
View Drawings 4
Camera Overview 5
Standard Accessories 6
Power Supply 7
SD Card 7
Shortcut Keys Description 8
Software in PC (Wireless Function) 9-11
Operational Modes 12
Settings 13-18
Mounting and Positioning 19
Specification 20
Warranty Card 21
KEEPTIME
Applicable models：KG891
Contents
Highly Recommended by Outdoor Explorers - KeepGuard Wildlife Scouting Cam KG Cams Instruction Book
1
Move the latches and open the front cover
Load 12 lithium AA or alkaline AA batteries
Set wireless function by computer software and copy file to SD card
Insert the SD card
Insert the SIM card
Switch to the SETUP Mode
Press MENU key
Press UP key to select Camera or Video Mode
Press RIGHT key to find Wireless Function and set it“ON”
Switch to the ON Mode and it have started working
KEEPTIME
Quick Start
2
Notes Before Use
3
1. When setting camera parameters, please put camera in Setup mode.
2. Do not set the camera directly from ON to Setup.
3. To replace the battery, SD card, and SIM card, firstly turn camera to OFF model.
4. Color of Indicator
1) When camera is updating, indicator light flashes green.
2) The indicator light flashes red when it is turned on or ready for operation.
3) low battery, the indicator light blue.
4) long standby time, the indicator flashes purple.
5. Batteries need to use dry batteries, can not use rechargeable batteries.
6. When the SD card is inserted into camera, make sure that the SD card is in the unprotected state.
7. When using an external power supply, make sure that voltage is correct.
8. Please take out the battery for long time unused, so as to avoid leakage of the battery.
9. Camera can not be directly immersed in water, can not be placed in the environment of strong acid and alkali.
10. Finger can not press the Fresnel lens.
11. Keep the lens and battery compartment clean.
12. Do not use sharp hard objects to attack the screen and so on.
KEEPTIME
View Drawings
4
KEEPTIME
Camera Overview
5
「Display Screen」
「Front Cover」
「IR LED」
「LDR」
「PIR」
「Antenna」
「Lens」
「LED Indicator」
「Latches」
「lock catch」
「Battery Case」
KEEPTIME
「MENU」
「UP」
ON
SETUP
「ON-OFF Key」
OFF
SIM
SD
「SIM Card Slot」
「RIGHT」
「OK」
「SD Card Slot」
M
OK
1× Security Case 1×Adapter 1×Micro-Lens / Wide-angel Lens 1×Cradle Head 1×solar panel
KEEPTIME
Standard Accessories
1×Belt 1×USB 1×Case 1×Manual
Other Accessories
6
Power Supply
7
After opening the two latches on the right side of the camera,
you will see that it has 12 battery slots. For maximum battery
life, we recommend using 12 lithium AA or alkaline AA batteries.
Please be sure to insert each battery with correct polarity
(negative or“flat”end against the long spring of each battery
slot).
SD Card / SIM Card
Insert the SD card and SIM card ( OFF mode ) before beginning
to operate the camera. SD card is supported up to maximum
64GB capacity.
64GB
SIM
KEEPTIME
Shortcut Keys Description
8
1.video/camera: switch camera mode to video mode or switch video mode to camera mode.
2.when in Menu or preview image, select settings or play image by one-way circulation.
1.shot: shot images by press RIGHT key, when no SD card inserted, camera will appear caption.
2.when in Menu, it can be used to view each submenu towards the right.
3.send image: press OK to preview images, then press RIGHT for more than 1s, it will appear a
tooltip, press UP, select Yes, then image will be sent to your phone or email.
OK
M
1.preview image: press it, you can preview image or video directly.
2.when in Menu, it can be used to confirm parameter of settings.
1.press it to turn into parameter setting interface.
2.when in Menu, it can be used to view each submenu towards the left.
3.when in Menu, press this key for more than 1s, camera can be turned into main interface.
KEEPTIME
KG891_SETTING_TOOLS_version01.01.01EXE
KEEPTIME
1. Dou ble cl ick t he sof tware, open it, t hen s ee MMS and SMTP setti ngs,as the right .
MMS and SMTP can only be chose one setting by one time.
Operation Manual
2.1 Click MMS setting, enter submenu, this way sends pics to mobile phone by MMSG.
2.2 Click SMTP setting, enter submenu, this way sends pics to email address.
4. Press Menu in cam era, turn it to ON i n Wirel ess, w hen bac k to ma in men u，pres s
Right fo r more t han 2s , when loosen the b utton，tooltip “Send photo”will appear
then choose“Yes”, the taken pic will be sent.
3. After finishi ng MMS nad SM TP set tings, file w ill be produc ed named“NET.CFG”.
Copy this file to SD card, then inser t into camera, you wil l see“SET ”in screen, which
means camera have read this file.
Attentions：
1. When be in main menu，press“ESC”in the keyboard can exit and shut the software.
2. Before sending pic, check and confirm on-state of Wireless.
Software in PC (Wireless Function)
9
KEEPTIME
1. Cl ick MMS,e nter submenu,w hen in“Auto”,cho ose“co untr y”and “o perator ”,
when confirm,GPRS Setting and Server Setting have been set defaultly.
2. If in“Auto”mode，you can not find correspoding country and operator, please turn
it into“Manual”mode.
3. When in“Manual”mode，please input GPRS Setting and Server Setting manually，
Any questions，please inquiry operator for specific parameters.
4. Aft er f in ishing sett ings ,cli ck“G en er ate” to s av e se ttin gs and g ener at e fi le
“NET.CFG”. Click“Exit”to exit submenu, back to main menu and not saving settings.
4. Input phone n umber an d email address , phot os can be sen t to mo bile p hone a nd
email, which need consume number s of MMS. Af ter all set tings are re ady, pr ess th e
button of “...”, you can choose the path to save file.
Attentions：
1. In GPRS Setting, APN is required. Due to different operators, sometimes Account
and Password are required，sometimes not.
Software in PC (Wireless Function)
Operation Manual
10
KEEPTIME
1. Cli ck SM TP,en ter su bmenu ,when in“Auto”,cho ose“cou ntry”and “ope rator”,
when confirm,GPRS Setting and Server Setting have been set defaultly.
2. If in“Auto”mode，you can not find correspoding country and operator, please turn
it into“Manual”mode.
3. When in“Manual”mode，please input GPRS Setting and Server Setting manually，
Any questions，please inquiry operator for specific parameters.
4. Aft er f in ishing sett ings ,cli ck“G en er ate” to s av e se ttin gs and g ener at e fi le
“NET.CFG”. Click“Exit”to exit submenu, back to main menu and not saving settings.
4. Input phone n umber an d email address , phot os can be sen t to mo bile p hone a nd
email, which need consume data. After all settings are ready, press the button of “...”,
you can choose the path to save file.
Attentions：
1. In GPRS Setting, APN is required. Due to different operators, sometimes Account
and Password are required，sometimes not.
Software in PC (Wireless Function)
Operation Manual
11
Operational Modes
12
The cam has three basic operational modes: 「OFF」, 「ON」 and 「SETUP」
●「OFF 」Mode
When cam in OFF mode, you can do the following:
• replacing the SD card or batteries
• connecting cam with other device by USB port
●「ON」Mode
Once in ON mode no manual controls are needed or possible (the control keys have no effect). The cam will take photos or videos
automatically (according to its current parameter settings) when it is triggered by the PIR sensor′s detection of activity in the area it covers.
●「SETUP」Mode
In the SETUP mode you can check and change the settings of the cam with the help of built-in LCD. Moving the power switch to the
SETUP position will turn on the LCD display and you will see an information screen.
Image Resolution
Camera Mode
Time Stamp ON
Video Resolution
720P
T
3M
Signal
of Photos Taken
0000/0888
Audio Rec ON
Video Mode
T
Time Scan ON
SD Card
Battery Level
Available Video
Recording Time
KEEPTIME
Clock
Mode
Image Size
Set
Exit
Set Clock
OK
Set
MENU
Set
Exit
Mode
OK
Video
MENU
Press OK and use UP/DOWN keys ( to change the setting )
and LEFT/RIGHT keys ( to move to the next field ) to set the
hour ( 24-hr f ormat o nly, “00”=mi dnight,“12”=n oon )
and minute, and then (on the lo wer row ),the year,month
and date. Once all settings are made, press OK to save.
Dual
Camera
Selects whether still photos or video clips are captured when
the camera is triggered. “Dual”=Camera+Video
Set
Exit
Image Size
OK
8M
MENU
16M
3M
Selects resolution for still photos from 3 to 16 megapixels.
Higher resolution produces better quality photos, but creates
larger files that take up more of the SD card capacity.
KEEPTIME
Settings
13
14
Settings
Capture Number
Video Size
Video Length
Capture Number
1
OK
MENU
Video Size
640*360
1280*720
MENU
10s
MENU
Set
OK
Set
OK
Video Length
Set
Selects how many photos are taken in sequence per trigger
in Ca mera mode. This setti ng affects photos taken in Field
Scan mode as well.
Exit
Selects video resolution (in pixels per frame). Higher
resolution produces better quality videos, but creates larger
files that take up more of the SD card capacity (fills up faster).
Exit
Sets length per captured video clip. Settings begin with 10
second default when parameter is first selected. After
stepping down to 5s, video length settings start over at 60s.
Exit
KEEPTIME
15
Settings
Camera Name
Interval
Coordinate Input
Camera Name
Input
Set
OK
Interval
Set
OK
Coordinate Input
ON
OFF
Set
OK
MENU
10s
MENU
MENU
Allows the user to set a custom name for the camera. Useful
for ID purposes when multiple cameras are setup, since each
camera will imprint its name on all photos (but not videos) it
Exit
Exit
captures.
Selects the length of time that the camera will “wait”until
it responds to any additional triggers from the PIR after an
animal is first detected and remains within the sensor's range.
During this user set“ignore triggers”interval, the camera
will not capture photos/videos.This prevents the card from
filling up with too many redundant images.
Using the Setup Menu Input Screens"Allows user to input
latitude and longitude coordinates for camera's location.This
data will be embedded in files saved on camera’s SD card.
Exit
KEEPTIME
Time Period Set
Time Scan
Set
Exit
Time Period Set
OK
MENU
Set
Exit
Time Scan
OK
MENU
Press OK and use UP/DOWN keys ( to change the setting ) and
LEFT/RIGHT keys ( to move to the next field ) to set time. Once
all settings are made, press OK to save.
Note: two time blocks can not appear overla p section, or you will not set
it successfully.
For example: A 8:00-12:00 B 13:00-23:00, this is OK for set.
Time Scan (Time Lapse) recording mode on/off. When activated,
Time Scan forces the camera to take photos or videos even
when it is not triggered by an nearby live animal,useful for
constant monitoring of an area that might be far away from the
camera. The user can set start and stop times for up to two in
dependent “blocks”of Time Scan recording,as well as the
interval time between each photo/video
OFF
ON
OFF
ON
KEEPTIME
Time Scan
Set
Exit
Wirless
OK
MENU
Means wireless function ON/OFF, if you want to send photo
tou you mobile phone or email, please turn it on.
OFF
ON
Settings
16
17
Settings
Language
Format SD Card
Default Settings
Language
Set
OK
Format SD Card
Set
OK
Default Settings
Set
OK
English
MENU
Execute
MENU
Execute
MENU
Exit
Exit
Exit
Selects user's preferred language from all nine languages.
Deletes (erases) all files stored on a card to prepare it for
reuse. Always format a card that has been previously used in
other devices. Caution! Make sure you have downloaded and
backed up any files you want to preserve first! Press OK to
execute, press MENU (or select NO then press OK) to exit
without formatting.
Select“Execute”and press OK to restore all parameters to
the original factory default settings.
KEEPTIME
Settings
18
Version
Version
KG890 170320A
Set
OK
MENU
Exit
KEEPTIME
Mounting
Optimum height：5-6.5 inch（1.5-2 m）
Optimum distance：60inch（9m）- 10inch（3m）
There are two ways to mount cam: using the provided adjustable web belt, or the tripod socket.
•Using the adjustable web belt: Push one end of the belt through the two brackets on the back of cam. Thread the end of the strap through the
buckle. Fasten the belt securely around the tree trunk by pulling the end of the strap firmly so there is no slack left.
•Using the tripod socket:The camera is equipped with a socket at the bottom end.
Sensing Angle and Distance Test
To test whether cam can effectively monitor the area you choose, this test is recommended to check the sensing angle and monitoring distance
of cam. To perform the test:
•Switch cam to SETUP mode.
• Make movements in front of the camera at several positions within the area. Try different distances and angles from camera.
• If indicator LED light flash, it indicates that position can be sensed.
The results of your testing will help you find the best place where mounting and aiming the cam. The height from the ground for placing the
device should vary with animal size appropriately. In general,3 to 6 feet is preferred. You can avoid potential false triggers due to temperature
and motion disturbances in front of the camera by not aiming it at a heat source or nearby tree branches or brush (especially on windy days).
KEEPTIME
MOUNTING and POSITIONING
19
Model
Lens
Trigger Time
Mode
Image Size
Capture Number
Video Size
Video Length
Camera Name
Interval
Coordinate Input
Time Stamp
Time Period
Timed Scan
Video Sound
Format
Default Set
Language
Specification
2020
KG891
f=7.36mm F/NO:3.2 FOV=55°; Auto IR-Cut-Remove (at night)；Support micro lens: 450mm
<0.3s
Camera; Video; Dual
3MP;8MP;16MP
1-9
640x360; 1280x720
5s-60s
Input
1s-60m
ON; OFF
On
ON; OFF
2X
On
Execute
Execute
English, Français, Español, Deutsch, Italiano,Pусский, Subcontinental, 繁體中文, 简体中文
KEEPTIME
Warranty Card
21
Model
Serial No
Date of Purchase
Your Name
Your Add
Your Tel
Warranty
Warranty State
During warranty, hardware failure occurring, which
caused by product itself, we will provide free
maintenance service for the customer. Free warranty
is for the first year. If there is a need for repair, you
should offer this warranty card, please take care of
this card.
KEEPTIME
22
户外探险者强烈推荐 ------Keepguard打猎相机 使用说明书
23
这款Keepguard户外相机是目前最畅销的，它为户外探索活动设计了防水和防雪功能。它内置了红外感应器，可以精准地感应到范围内的任何
热量体，拍出高品质的照片和视频。同时这款相机采用的是最新的3G模块，反应灵敏，感应速度快，且传输速度一流。详情请参考本手册下面
的注释和说明。
目录
快速启动 2
使用前注意事项 3
草图预览 4
相机预览 5
标配 6
电池和SD卡SIM卡的安装 7
快捷键 8
电脑配置软件 9-11
操作模式 12
设置 13-18
安装和定位 19
规格参数 20
保修卡 21
适用机型：KG891
KEEPTIME
快速操作流程
24
→ 打开扣柄，打开前壳
→ 打开电池仓并放入十二节锂电池或者碱性干电池
→ 打开电脑配置软件，设置好无线功能参数，并将设置好的文件拷到SD卡里
→ 将SD卡和SIM卡插入相机
→ 将相机切换到SETUP模式，这时屏幕上会显示“设置”，表示相机已经按照你的要求设置好了无线功能
→ 按下菜单按钮, 按上下键选择相应模式
→ 按左右键设置其它参数
→ 按右键，找到无线功能，并将其设置到ON模式
→ 将相机从SETUP切换到ON模式，相机开始工作
KEEPTIME
使用前注意事项
25
1.设置相机参数时，请将相机拨到Setup模式下。
2.不可将相机从ON档位直接拨到Setup档位。
3.更换电池，SD卡和电话卡时，需先将相机拨到OFF档位。
4.指示灯颜色变化
1）更新软件时，指示灯闪绿色。
2）开机或者准备工作时，指示灯闪红色。
3）低电量时，指示灯闪蓝色。
4）长时间待机时，指示灯闪紫色。
5.电池需用干电池，不可以使用充电电池。
6.SD卡插入相机时，需确保SD卡在非保护状态。
7.使用外部电源时，请注意电压是否合适。
8.长时间不用相机时，将电池取下，以免电池漏液，腐蚀相机。
9.相机不可直接浸泡在水中，不可置于强酸强碱的环境下。
10.手指不可按压菲涅尔透镜。
11.保持镜头和电池仓的清洁。
12.不可用尖锐硬物攻击屏幕等。
KEEPTIME
草图预览
26
KEEPTIME
外观及按键说明
27
「显示屏」
「前盖」
「LED灯」
「关敏电阻」
「红外传感器」
「天线」
「镜头」
「LED指示灯」
「扣柄」
「锁眼」
「电池仓」
KEEPTIME
「上键」
「菜单」
ON
SETUP
「开关键」
OFF
SIM
M
OK
「SIM 卡槽」
「右键」
「确认键」
SD
「SD 卡槽」
标配
28
1×绑带 1×USB线 1×包装盒 1×说明书
选配
1× 铁壳 1×适配器 1×微距镜头/广角镜头 1×云台 1×太阳能电池板
KEEPTIME
电池的安装
29
在打开两个扣柄之后，您会在相机的右边看到十二节电池槽。为
了使电池寿命最大化，我们建议使用十二节锂电池或碱性干电池。
放入电池时，请确保电池的正负极放置正确。
SD卡和SIM卡的安装
开始操作相机前请插入SD卡，储存卡最大容量支持64GB。
在插入SD卡和SIM卡前，请确保相机是处于OFF模式。
64GB
SIM
KEEPTIME
快捷键
30
1.切换模式: 从相机模式切换到视频模式，或者从视频模式切换到相机模式。
2.在菜单键界面时，可以选择子菜单里的具体设置参数，在回放照片时，可用于单向循环回放照片。
1.拍照：短按右键可直接拍照，长按住右键超过1秒，相机拍照并且屏幕中间会弹出一个对话框，按上键选择“是“，所拍
照片会发送到你的手机或者邮箱。
2.处于菜单界面时，可向右选择子菜单。
3.发送照片：按OK键回放照片时，然后长按住右键超过1秒，屏幕中间会弹出一个对话框，按上键选择“是”，当前查看的
照片就会发送到你的手机或者邮箱。
OK
M
1.回放: 按OK键，可直接回放图片或视频。
2.设置参数时，可按OK键，确认所选设置。
1.按M键，可进入菜单设置界面。
2.处于菜单界面时，可向左查看子菜单。
3.处于菜单界面时，长按M键超过1秒，可回到主界面。
KEEPTIME
电脑配置软件（无线功能）
31
KG891_SETTING_TOOLS_version01.01.01EXE
操作指南
1. 电脑端双 击软件图标， 打开软件，可看 到供选择的M MS设置和SM TP设置，如 右图。MMS 和
SMTP只能选择其中一个设置。
2.1 单击MMS，进入子菜单，此可将所拍照片通过彩信的形式发送至手机。
2.2 单击SMTP，进入子菜单，此设置可将所拍照片通过邮件的形式发送至邮箱。
3. MMS和S MTP设置完成后 ，生成文件名为“ NET.CFG”。将这个文件拷贝到SD卡 里，插入
相机，把相机拨到SETU P模式，这时，屏幕上弹 出一个提示框“设置”， 这表示相机已经读取
了这个文件。
4. 相机按Menu键，找到”无线设置“并拨到”打开“模式。返回主菜单后，长按右键超过2秒，
松开后，屏幕上弹出一个提示框“发送图片”，选择“是”，便将所拍图片发送出去。
注意：
1. 处于主菜单界面时，按键盘上的“ESC”可直接退出并关闭软件。
2. 发送照片前，检查并确认相机设置里的无线功能是开启的状态。
KEEPTIME
电脑配置软件（无线功能）
32
操作指南
1. 单击MMS，进入子菜单，在”Auto”模式下，选择“国家”及“运营商”，选定后，GPRS
Setting 和 Server Setting已经由后台默认设置。
2. 如果在“Auto”模式下，找不到对应国家的运营商资料，就需用“Manual”模式。
3. “Manual”模式下，需手动填上GPRS S etting 和 Ser ver Setting，如有疑 问，可询问运营
商具体参数。GPRS Setting中，APN为必填项。
4. 输入电话和邮箱地址，即可将图片发送到手机和邮箱，需消耗彩信数。所有参数设置完成后，
点击路径框的省略号按钮，可以选择文件的保存路径。
5. 完成设置后，按“Generate” 保存设置并生成文件“NET.CFG”。按“Exit”退出子菜单，
回到主菜单，且不保存设置。
注意：
1. GPRS Setting中，APN为必填项，Account 和 Password因运营商不同，有些需输入，有
些不需输入。
KEEPTIME
电脑配置软件（无线功能）
33
操作指南
1. 单击SMTP，进入子菜单，在”Auto”模式下，选择“国家”及“运营商”，选定后，GPRS
Setting 和 Server Setting已经由后台默认设置。
2. 如果在“Auto”模式下，找不到对应国家的运营商资料，就需用“Manual”模式。
3. “Manual”模式下，需手动填上GPRS S etting 和 Ser ver Setting，如有疑 问，可询问运营
商具体参数。GPRS Setting中，APN为必填项。
4. 输入邮箱地址，即可将图片发送到邮箱，消 耗流量。所有参数 设置完成后，点击 路径框的省
略号按钮，可以选择文件的保存路径。
5. 完成设置后，按“Generate” 保存设置并生成文件“NET.CFG”。按“Exit”退出子菜单，
回到主菜单，且不保存设置。
注意：
1. GPRS Setting中，APN为必填项，Account 和 Password因运营商不同，有些需输入，有
些不需输入。
2. 如果AUTO设置工作异常，请尝试MANUAL方式。
KEEPTIME
操作模式
34
相机有三个基础操作模式
●OFF模式
当相机在OFF模式下，您可以从事以下操作：
•更换SD卡或者电池
•通过USB插口连接其他设备
●ON模式
一旦ON 模式启动，不可再进行手动设置（控制键没有效果），这款户外无线机可根据您当前的设置要求，红外感应器所覆盖的范围内
感应到有热量体活动时会自动进行拍照或者录像。
●SETUP模式
在SETUP模式下，可以检查或者更改相机设置。将开关键拨到SETUP模式，显示点亮，菜单出现，检查设置及回放的预览。
相机模式
时间戳
图像分辨率
3G信号
3M
T
拍摄照片数量
0000/0888
录音打开
摄像模式
定时扫描
录像分辨率
720P
T
录像时长
SD卡已装载
电池电量
KEEPTIME
设置
35
Set Clock
时间
模式
图片像素
Set
OK
Set
OK
Set
OK
Set
MENU
Mode
Camera
Video
Dual
MENU
Image Size
3M
8M
16M
MENU
按下OK键，使用上下键和左右键（移动到下一个选项）设置小
时（24小时制，“00”=午夜“12”=中午）和分钟，接下来设
置年月日，一旦所有设置完成，按下OK键保存。
Exit
三种选择模式，相机模式，视频模式，“双模式”=相机+录像。
Exit
3百万到1千6百万像素的照片可供选择。高的分辨率会产生高质
量的照片，但是也会占用较大的储存卡空间。
Exit
KEEPTIME
设置
36
Capture Number
抓拍数量
录像尺寸
录像长度
Set
OK
Video Size
1280*720
Set
OK
Video Length
Set
OK
1
MENU
640*360
MENU
10s
MENU
相机模式下每次被触动时，连拍张数
Exit
选择视频的像素（每帧像素）。高像素将会产生高品质的影片，
但是将会占用储存卡的较大空间。
Exit
设置所拍视频的长度。10s是默认参数。视频长度设置5s-60s之
间。
Exit
KEEPTIME
设置
37
Camera Name
相机允许自定义名称。相机名称的目的是为了客户方便区分相
相机名称
间隔
坐标输入
Input
Set
OK
Interval
Set
OK
Coordinate Input
OFF
Set
OK
MENU
10s
MENU
ON
MENU
Exit
Exit
Exit
机。
拍照间隔是设置每张照片的间隔时间，当相机被首次触发后，
需要等待间隔时间，然后在拍第二张。当目标物持续停留在感
应范围内时，设置间隔可以有效的防止储存卡快速满荷。
使用者可以进入设置菜单中的“输入当地的经纬度坐标”，这
个数据将会被嵌入到文件中保存在储存卡中。
KEEPTIME
设置
38
Time Period Set
工作区间设置
定时扫描
无线
Set
OK
Time Scan
Set
OK
Wirless
Set
OK
ON
OFF
MENU
ON
OFF
MENU
ON
OFF
MENU
Exit
Exit
Exit
按下OK键使用上下键（改变设置）和左右键设置时间。一旦所
有设置完成，按下OK键保存。
注意：两个时间不可以重叠，出现重叠时，相机弹 出提示框，所设时间段
无效。
例如: A 8:00-12:00 B 13:00-23:00
定时扫描模式开/关，当开启时，定时扫描的时间区间内，即使
不会被触发，相机也将自动拍照。这个可以防止相机感应不到
远距离的目标物时而导致的错过。用户可以设置开始和结束时
间,以及每张照片/视频之间的间隔时间。
无线功能的开启或者关闭，当想发送图片到手机或者邮箱时，
请开启此选项。
KEEPTIME
设置
39
语言
Language
Set
OK
Format SD Card
English
MENU
从九国语言中选择使用者所需的语言。
Exit
SD卡格式化
默认设置
Execute
Set
Default Settings
Set
MENU
OK
Execute
MENU
OK
Exit
Exit
清除所有储存文件以备循环使用，请将其他机子上使用过的SD
卡格式化，注意保存好所需的文件。
选择执行键，并按下OK键将所有的参数恢复默认设置。
KEEPTIME
设置
40
Version
版本号
KG890 170320A
Set
OK
MENU
Exit
KEEPTIME
安装和定位
41
安装
最佳高度：5-6.5 英尺（1.5-2 米）
最佳距离：60英尺（9米）- 10 英尺（3米）
有两种方法可以安装相机：使用提供的可调节绑带或者三脚架。
•使用可调节的绑带：把带子的一端通过相机外部的两个括口，穿好后用扣系紧，把绑带紧紧地系到树干上，确保其不会脱落 。
•使用三脚架：通过相机底部的三角安装好相机。
感应角度和距离测试
测试相机是否可以有效的感应您所选择的区域，我们建议进行相机的感应角度和距离测试。测试：
•相机开关键处于SETUP模式下。
•在相机感应的范围内做几个您期望的游戏或者主题。尝试从相机的不同角度和距离开始测试。
•如果LED情景指示灯闪烁，表明相机可以感应到。
这项测试的结果可以帮助您更好的选择安装相机的地点，相机的高度应该和所拍摄的动物的高度相适应，总的来说，3到6英尺是最好
的选择。你可以避免由于温度和运动障碍或者附近的树木或者东西擦过时的相机无法对准红外感应器所感应到的热源。
KEEPTIME
参数
镜头
感应速度
模式
图片尺寸
抓拍张数
录像尺寸
录像长度
相机名称
间隔
坐标输入
时间戳记
工作区间
定时扫描
录像声音
格式化
默认设置
语言
42
规格参数
KG891
f=7.36mm F/NO:3.2 FOV=55°; Auto IR-Cut-Remove (at night)；Support micro lens: 450mm
<0.3 秒
相机; 录像; 双模式
3MP;8MP;16MP
1-9
640x360; 1280x720;
5秒-60秒
Input
1秒-60分钟
开; 关
开启
开; 关
2X
开启
执行
执行
英语，法语，德语，俄语，西班牙语，意大利语，芬兰语，繁體中文, 简体中文
KEEPTIME
保修卡
43
Warranty保修卡
型号
机身号
购买日期
客户姓名
客户地址
客户电话
保修说明
在保修期间，硬件发生故障，产品本身造成的，我们将为
客户提供免费的维修服务。免费保修期为一年。如果有需
要修理的，需提供这张保修卡，请保管好此保修卡。
KEEPTIME
Loading...