KEENCUT Javelin, Practik, Max Instructions Manual

CUTTER BARS

INSTRUCTIONS

Thankyou for choosing the Keencut Javelin, Practik
or Max. Every effort has been made to bring you a
superbly built product with the promise of many years
of good service.

Keencut – the world’s finest cutting machines

Keencut Limited, Tyson Courtyard, weldon South Industrial Estate,

Corby, Northants, ENGLAND NN18 8AZ.

Telephone: [phone] Facsimile: 01536 204227

E-mail: [e-mail] Website: www.keencut.co.uk

LARGE FORMAT CUTTER

1 Setting Up 1

Fitting the Wall Brackets

Space the brackets so that the Javelin, Practik or Max is evenly supported and does not
sag, ensure they are securely fixed to the wall.

Inserting and setting the blade

 The blade is inserted from the back of the blade holder, push it fully forward and

tighten the wingbolt.

 To set the blade for a repeatable cutting depth unclamp the blade and turn the knob

at the front of the cutter, clockwise to increase blade depth & counter clockwise to
decrease.

It is essential that the Javelin, Practik or Max is used on a flat surface to cut

accurately. A warped or bowed table top can induce a twist in the Javelin,

Practik or Max resulting in a bowed cut.

Only lift or move the Javelin, Practik or Max using the grip on the
top edge of the cutter bar. If there is a need to handle the cutter
in any other way or to move it away from its cutting bench, the
blade must be removed first.

➠







SAFETY

WARNING