KEC LSM64 Operating Instructions Manual

6 . 4"TFT LCD TELEVISIO

N

OPERATING INSTRUCTIONS

PROFESSIONAL INSTALLATION ONLY

MODEL : LSM64

FOR RV-SPECIFIC DC-ONLY OPERATION

PLEASE READ THIS ENTIRE OWNER’S
MANUAL BEFORE USING THIS LCD TV.

IMPORTANT NOTE :
WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR A VIDEO

CASSETTE PLAYER, VIDEO GAME, OR CAMERA.
TELEVISION BROADCAST RECEPTION WILL BE ADVERSELY AFFECTED BY CONDITIONS SUCH AS
MOTION, CHANGE OF DIRECTION, ATMOSPHERIC ACTIVITY, AND LOCAL SURROUNDINGS.
IT IS THEREFORE LIKELY THAT BROADCAST PICTURE QUALITY WILL BE MARGINAL WHEN THIS
SYSTEM IS USED IN A MOBILE ENVIRONMENT.

MOBILE
APPLICATIONS

Ⓡ

"THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED

AND INSPECTED IN COMPLIANCE WITH THE ISO9001 QUALI-

TY ASSURANCE SYSTEM."

1 . Read Instructions-All the safety and operating instructions should be read before the appliance

is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future refer­e n c e .

3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered
t o .

4. Follow Instructions-All operating and use instructions should be followed.

5 . C l e a n i n g -Unplug this product from power cable connector before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. A t t a c h m e n t s -Do not use attachments not recommended by the product manufacturer as they
may cause hazards.

7 . Water and Moisture-Do not install this product near water-for example, near a bath tub, wash-

bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8 . A c c e s s o r i e s -Do not place this product on an unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury to a child or adult, and serious damage to the equipment.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should follow the manufacturer’s instructions, and
should use a mounting approved by the manufacturer.

9 . A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the product and cart combination
to overturn.

1 0. V e n t i l a t i o n -Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

1 1 . Power Sources-This product should be operated only from the type of power source indicated on

the marking label. lf you are not sure of the type of power supply to your car, consult your product
d e a l e r .

For products intended to operate from battery power, or other source, refer to the operating
i n s t r u c t i o n s .

1 2 . S e r v i c i n g -Do not attempt to service this product yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service person­n e l .

3

I M P O RTANT SAFEGUARDS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOTOPEN ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL

CAUTION :

·

ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS DEVICE WHICH ARE NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE

WARNINGS :

·TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

·DO NOT OPEN THE CABINET. DANGEROUS HIGH VOLTAGE IS PRESENT. SERVICING

SHOULD ONLY BE PERFORMED BY QUALIFIED PERSONNEL.

·THIS LCD VIDEO SYSTEM SHOULD ONLY BE OPERATED WITH 12V DC.

GRAPHICAL SYMBOLS EXPLANATION

This lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient magni­tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (Servicing) instructions in the
literature accompanying the appliance.

2

CAUTIONS

We strongly recommend that you carefully read all of the descriptions and operation procedures con­tained in this Owner's Manual prior to operating your new LSM64.

CAUTIONS

··························································

2

IMPORTANT SAFEGUARDS

·············································

3

TABLE OF CONTENTS

·················································

5

FEATURES

·························································

6

IDENTIFICATION OF SWITCHES AND JACKS

································

7

ACCESSORIES

·······················································

8

REMOTE CONTROL USE

···············································

9

SIGNAL CONNECTION

················································

1 1

POWER CONNECTION

················································

1 2

DOME LIGHT CONNECTION

············································

1 3

SET UP FOR CAR USE

················································

1 4

TV OPERATION

······················································

1 5

SET UP BUTTON

·····················································

1 6

PICTURE BUTTON

···················································

1 9

STATUS BUTTON

····················································

2 0

MORE USEFUL FUNCTIONS

············································

2 1

RECEPTION DISTURBANCE

············································

2 3

TROUBLESHOOTING GUIDE

············································

2 4

SPECIFICATIONS

····················································

2 5

5

T ABLE OF CONTENTS

service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. lf liquid has been supplied, or objects have fallen into the product.
c. lf the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified techni-

cian to restore the product to its normal operation.
e. lf the product has been dropped, or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.

used replacement parts specified by the manufacturer or that have the same characteristics as
the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.

technician to perform safety checks to determine that the video product is in proper operating
c o n d i t i o n .

ommended by the manufacturer.

stoves, or other products (including amplifiers) that produce heat.

4

I M P O RTANT SAFEGUARDS

6.4 INCH TFT LCD PANEL
12 Volt DC Operation
Frequency Synthesizer Tuning System
Full On-Screen Display of all Switching Functions
Full On-Screen Display of all Picture Functions
Automatic Power Shut-off & Memory Power On Functions
Full Remote Control
High Voltage Protection (Over 18 Volts DC)
Polarity Reversal Protection
Four Input Selections (TV Tuner, VIDEO1, VIDEO2, VIDEO3)
Wireless Remote Control
A/V and External Speaker Out, External Antenna Input, Ready for CAR Set Up
Memory Back Up (10 Years)
Extension Cable for KEC Mobile Application VCP

7

I D E N T I F I C ATION OF SWITCH AND JACKS

1. EXTERNAL ANTENNA IN JACK

2. DC INPUT JACK

3. EXTERNAL SPEAKER OUT JACK

4. AV2 INPUT JACK

5. AV OUTPUT JACK

6. AV1 INPUT JACK

7. AV3 INPUT JACK

8. LCD PANEL DROP-DOWN BUTTON

9. FM ANTENNA

10. LAMP

11. LAMP SWITCH

12. LAMP POWER INPUT

13. TV/VIDEO BUTTON

14. MENU BUTTON

15. CHANNEL DOWN(▼), UP( ▲) BUTTONS

16. POWER BUTTON

17. REMOTE CONTROL SENSOR

18. STAND-BY INDICATOR

N O T E S :
Automatic Power Off Function:

This System will automatically turn off approximately 15 minutes after it last receives a video signal.

Memory Power On Function:

If this System was in power on mode when power was last removed (unplugged or ignition off),
it will automatically turn on when power is reapplied.

6

F E ATURES

1
2

3

4

5

6

7
8

9
1 0
1 1

1 2

1 3
1 4

1 5
1 6

1 7

1 8

1. TV/VIDEO BUTTON

Press repeatedly to cycle program source selection between T

V
A/V1 IN & A/V2 IN & A/V3 IN. This button is duplicated on th
remote control and TV/SET.

2. TV/CATV BUTTON

This model is not supplied TV/CATV button function.

3. DIRECT CHANNEL SELECTION (0 ~ 9) BUTTONS

Used for the direct selection of channels.

4 . MENU BUTTON

Press to call up an on-screen menu used to set channel program
channel list, FM mode, FM Freg and Language.

5. VOLUME DOWN (▼), UP (▲) B U T T O N S

Press to increase or decrease volume. Also used in conjunction wit
the PICTURE and SET UP operations.

6. CHANNEL DOWN (▼), UP (▲) B U T T O N S

Press to view the next higher or lower channel stored in memory

These buttons are duplicated on the Remote

Control and TV SET.

7. MUTE BUTTON

Press to temporarily reduce sound to minimum level.
Press again to restore sound.

8. STATUS BUTTON

Press repeatedly to cycle between a user-adjustable picture and

different preset picture balances.

9. TV POWER BUTTON

Press to turn the system ON/OFF. This button is duplicated on
the Remote Control and TV SET.

󱇰

Remote Control

10. DISPLAY BUTTON

Press to display the channel number of the program you are viewing and the setting of the SLEEP TIMER.

11. QUICK VIEW BUTTON

Press the QUICK VIEW button to switch between the current and
the previously viewed channel.
The system must be in TV mode for this to function.

12. 100 BUTTON

This model is not supplied 100 button function.

13. PICTURE BUTTON

Press repeatedly to call up the desired on-screen picture
control (Contrast, Brightness, Sharpness, Color, Tint).

14. SLEEP BUTTON

Sets the TV to automatically power off in 15-180 minutes.

15. CONTROL BUTTONS FOR VCP

These 8 buttons will control KEC Mobile Applications Video Cassette Players.

16. BATTERY COVER

9

REMOTE CONTROL USE

9

2

6
5

1 3

1 5

1 4

3

5

8

󱇰

REMOTE CONTROL

󱇰

Extension Cable (Varies with packaging)

󱇰

B A T T E R I ES(AAA ×2 )

󱇰

WARRANTY CARD

󱇰

SAFETY TIPS

󱇰

OWNERS MANUAL

ACCESSORIES

1

1 0

4

6
7

1 1

8

1 2

1 6

󱇰

Install Scrow

󱇰

HOUSING FRAME

1 1

SIGNAL CONNECTION

•

Prior to making any connections to your LVS SYSTEM, be sure to turn POWER off.

•

For a more detailed understanding of each connection, it is recommended that you read the instruc­tion manual supplied with each connected cornponent.

•

The following shows one possible example of connections for external equipment.

•

To view connected A/V1

select VIDEO 1 by pressing the TV/VIDEO button on the Remote Control or button on the TV set.

•

To view connected A/V2,3

select VIDEO 2,3 by pressing the TV/VIDEO button on the Remote Control or button on the TV set.

1 0

REMOTE CONTROL USE

CAUTION : Avoid dropping the remote control.

NOTES :

󱅴

Remote control should be directed at the remote control sensor on the TV.

󱅴

The maximum operating distance of the remote control is about 10 feet from the front of TV set.

󱅴

The remote control should be kept away from UV exposure which may disrupt its operation.

󱅴

It may be difficult to receive remote control signal when UV is present. In this case, operate it closer
to the remote control sensor.

It is time to replace the batteries when the remote control is not working properly.

Replace with new batteries ( Alkaline batteries usually last for 6 months to 1 year. )

󱅴

Press and push the battery compartment cover in the direction of the arrow and lift off.

󱅴

Correctly install new batteries, noting the correct (+ / -) polarity shown in the compartment.

󱅴

Use only new AAA batteries of the same type.

󱅴

If batteries become exhausted, remove them immediately to avoid leakage.

󱅴

Should battery leakage occur, clean the battery compartment with a soft cloth and replace with new
b a t t e r i e s .

REMOTE CONTROL BATTERY INSTALLATION

Remote control

Sensor

•

Connect the antenna lead to the
ANTENNA Input terminal of the TV set.

VHF/UHF
ANTENNA

75-ohm

Coaxial Cable

EXT.Speaker

(4 ohm)

VIDEO GAME

or VCP or

DVD etc.

KEC

Mobile

Applications

VCP

<A/V 1 INPUTS>

<A/V 2 INPUTS>

Extension Cable

≒15 foot

VIDEO GAME or

CAMCORDER,

DVD etc.

<A/V 3 INPUTS>

<A/V OUTS>

1 3

DOME LIGHT CONNECTION

(1) “NEGATIVE” Type Door Circuit

Red wire - 12 volt constant power.
Brown wire - Chassis ground.

This wire provides a ground to the dome light circuit when the three (3) position switch is
in the “on” position. If this wire is not connected the dome light will not operate when the
switch is in the “on” position.

White wire - Negative door switch.

This wire connects to the negative door switch. This wire should be locate in the head
liner where the factory dome light was removed. When one of the doors are opened on
the vehicle this wire will have continuity (shorted) to ground.

(2) “POSITIVE” Type Door Circuit

Red wire - Chassis ground.
Brown wire - 12 Volt constant power.

A constant power lead may have to be run up to the head liner area for this connection.
Check all wires for constant power that were attached to the factory dome light.

White wire - Positive door switch.

This wire attaches to the positive door switch wire. This wire should be located in the
head liner area where the factory dome light was removed. When one of the doors are
opened on the vehicle this wire will have 12 volt power on it.

•Audio output is Monophonic when receiving on-air broadcast signals.

•Audio output is Stereo when a stereo audio signal is fed from external audio equipment that is con-

nected to the [selected] A/V1 or A/V2, A/V3 Input terminals.

•The SPEAKER JACK teminal is a high level output whose sound level is Variable up to 0.7W max­imun when connected to a 4-ohm speaker.

•This model incorporates 3sets of AUDIO/VIDEO INPUTS (A/V1 & A/V2, A/V3 for direct connection
of 3 external program sources (Video Game, Camcorder, Video Player, etc.).

•Direct connection results in superior video quality from the connected program sources.

•Refer to the instruction manual supplied with each external instrument for details.

1 2

SIGNAL CONNECTION

POWER CONNECTION

CONNECTING TO CAR POWER

NOTE : The cable assembly used to connect the L,M64 to the 12-Volt power supply varies

depending on product packaging.

NOTE

MANUFACTURER : TEASUNG ELECTRIC CO.,LTD. TYPE# : AWM STYLE 1015

W A R N I N G

The DC Battery Cord is ONLY for use with this model.
Do not use it to power any other product

F R O M RED : DC12V
CAR BATTERY BLACK : GROUND

RED : +12V DC

Red, Brown, White and Leads

These leads provide power for the dome light circuit. The LSM64 is configured to be
used with vehicles that use a “negative” type door dircuit. However, the LSM64 can be
reconfigured for vehicles that use a “positive” type door circuit. Most import and
domestic vehicles utilize a “negative” circuit. Ford and Lincoln/Mercury vehicles are
usually “positive” type circuits. Check your specific vehicle for the type of circuit it uti­lizes before proceeding with the installation.

•

Insert batteries into the Remote Control unit by following the "REMOTE CONTROL USE"

section in this manual.

•

Connect the DC Cord to 12-Volt Power by following the "POWER CONNECTION"

section in this manual.

(1) Press POWER button on the TV or on the remote control.

(2) Press TV/VIDEO button

On the TV or on the remote control to select the
desired mode.(TV, VIDEO 1, VIDEO 2, VIDEO 3).

(3) Select desired channel

Using the CHANNEL ▼/▲ buttons on the TV or on the
remote control.
Pressing the ▲ buttons advances to higher channels, ▼ button to lower channels.

Channels can be selected directly by using the 10-digit Keypad on the Remote Control.

Examples : To select Channel 5, press "0" first, than press "5". (Be sure to press "0" first).

(4) Press VOLUME (▲/▼) button

On either the Remote Control or on the TV SET to adjust volume
to your desired listening lever.

The volume level is indicated on the screen
by reference number (0-63) and by bar scale as shown.

•Install LCD A ssembly with 4 screws.

1 5

TV OPERATION

INITIAL PREPARATIONS

BASIC OPERATION PROCEDURE

NOTE : The volume level can be muted instantly by pressing MUTE button on the Remote

Control. See “MUTE Button” on page 22.

( 1 )

( 3 )

( 4 )

1 4

SET UP FOR CAR USE

W A R N I N G

UNDER NO CONDITION SHOULD THE LCD DISPLAY BE MOUNTED IN ANY POSITION
WHERE A PICTURE MIGHT BE VISIBLE TO HE DRIVER. EVEN IN THOSE CASES
WHERE SUCH AN INSTALLATION IS NOT PROHIBITED BY LAW, DOING SO MIGHT
INCREASE THE LIKELIHOOD OF A SERIOUS ACCIDENT.

N O T E S :

The DC Power plug should not be accessible to
the consumer.
When the components are mounted with screws,
be certain that the thickness of the mounting mate­rial is as follows:
Wood : 10mm or more.
Metal : 3mm or more.
Plastic : 4mm or more.

( 4 )
( 3 )

In case of TV SET.

Press the “MENU” button and select “VOLUME”
option, then press the CHANNEL ▲/▼ button.

VOLUME 3 3

( 2 )

(1) AUTO PROGRAM

This function allows automatic memorization of all the active TV or Cable channels in your viewing
area. Once memorized, channels viewing CHANNEL LIST.
To activate AUTO PROGRAMMING, press the SET UP Button until "AUTO PROGRAM" is select­ed, then press the VOLUME (▲) button.The following display will appear and the program set-up
procedure will begin automatically.

All possible channels will be rapidly scanned and all active channels will be memorized.

•

Note that very weak broadcast signals will not be memorized.

•

If you wish to stop the Auto Programming procedure before it is finished, press the VOLUME (

▲

)

b u t t o n .

(2) CHANNEL LIST

1. To delete a channel from memory

•

Activate CHANNEL LIST by pressing the SET UP Button
until "CHANNEL LIST " is selected, then press the
VOLUME (▲) button. The following display will appear.

•

Press the CHANNEL(▲/▼) buttons or the 10-digit keypad buttons to select.
want to erase.

AUTO PROGRAMMING

5

+ E X I T

󱍷

1 7

SET UP BUTTON

The MENU function allows you to perform basic settings for TV and Monitor status.

•

Press the MENU button on the Remote Control.

The first time it is pressed, the following display appears on the screen.

•

Press the MENU button repeatedly to select the desired item for adjustment. Each time the button
is pressed, the magenta-colored portion shifts in the order shown below to indicate that the col­ored item in the list can be adjusted.

(1) AUTO PROGRAM Mode

(2) CHANNEL LIST Mode

(5) NO DISPLAY

(3) FM Mode

(4) LANGUAGE Mode

•

After selecting the desired mode, press VOLUME (▲) button on the Remote Control.

•

When the on-screen display appears on the screen, it will disappear after several seconds.

•

The On-screen display may be unclear, shaky, or blurred when the System is in TV Mode and

tuned to a channel where no program is being broadcast.

•

The On-screen display may be shown with or without a black background (except for Channel

number).

On-Screen Display

󱈊
󱈊
󱈊

⇒

1 6

SET UP BUTT O N

CHANNEL LIST
5 7 8 10 15

▼

PREW ▲N E X T

CHANNEL LIST
5 7 8 10 15

18 20

▼

PREW ▲N E X T

( 2 )

( 2 )

( 1 )

M E N U

AUTO PROGRAM
CHANNEL LIST
FM MODE : OFF
LANGUAGE ENGLISH

S E L + E N T E R

•

The PICTURE button on the Remote Control selects the modes for picture adjustment.

•

Press the PICTURE button on the Remote Control

•

Press the PICTURE button repeatedly to select the desired item for adjustment.
Each time it is pressed, the magenta-colored portion shifts in the order shown below to show that
the colored item in the list can be adjusted.

(1) CONTRAST adjustment mode
(2) BRIGHT adjustment mode
(3) SHARP adjustment mode
(4) COLOR adjustment mode

(6) NO DISPLAY

(5) TINT adjustment mode

•

After selecting the desired mode, press VOLUME (▼/▲) buttons on the Remote Control
(or on the TV SET) to adjust it to your preference according to the chart below.

Example - Adjusting CONTRAST :

1. Press the PICTURE button on the remote control. The PICTURE menu will be displayed.

2. If the arrow cursor is not already pointing to CONTRAST, use “PICTURE” button to select it

1 9

PICTURE BUTTO N

L I G H T
D A R K
S O F T
S U B D U E D
R E D D I S H

VOL

▼

C O N T R A S T
B R I G H T
SHARP
C O L O R
T I N T

S T R O N G
B R I G H T
S H A R P
V I V I D
G R E E N I S H

ITEM V O L U M E

▲

󱈊

󱈊

󱈊
󱈊

NOTE ON THE PICTURE FUNCTIONS:

Color LCD screens operate differently then conventional color picture tubes. As you operate the pic­ture adjustments you will notice less dramatic changes in picture appearance then would occur with a
conventional picture tube. This is especially true of the CONTRAST control.
Also note that as the BRIGHT control is adjusted, the contrast of the picture automatically varies

1 8

SET UP BUTTON

•

Fuction to be able to listen to audio signal captured by TV set with car radio through FM antenna

P r o c e d u r e

1. Press the MENU button repeatedly to select the “FM MODE” item

2. Press the VOLUME (▲) button to cycle the on-screen menu between
“OFF” “MODE1” and “MODE2”.

3. If FM MODE1 selected, “FM FREQ” can select 4 signal areas.
(88.3MHZ, 88.7MHZ, 89.1MHZ, 90.3MHZ)

4. If FM MODE2 selected, “FM FREQ” cam select signal area from 88.3MHZ to 95.0MHZ by
100KHZ unit.

5. Set the signal you want in TV Set. Then IF you set the CAR Radio signal same as TV Set sig­nal, you can listen to the broadcasting of TV Set through Car Radio.
Example - Receiving Audio through FM 88.7MHZ

The on-screen displays can appear in your choice of 4 languages - English, Spanish, Portuguese or

F r e n c h .

Procedure :

1. Press the MENU button

2. Press the VOLUME+ button to cycle te on-screen menus between “ENGLISH”, “EspaÑOL”,
“PortuguÊS” and “FRANÇAIS”.

󱍷

8 8 . 7 M H z

S C A N

F M

S P E A K E R

<CAR RADIO>

󱍷

CONTRAST 7 5

󱍷

󱍷

NOTE

Please install the antenna cable position to the same direction with installed CAR antenna direc­tion. Do not adjust “LA01” coil for option FM frequency setting.
It was adjusted in the factory for best condition.

M E N U

AUTO PROGRAM
CHANNEL LIST
FM MODE MODE 1
FM FREQ. 88.7MHz
LANGUAGE ENGLISH

S E L + A D J

M E N U

AUTO PROGRAM
CHANNEL LIST
FM MODE OFF
LANGUAGE ENGLISH

S E L + A D J

M E N U

BUSQUEDA AUTOMATICA
CHANNEL LIST
FM MODE : NO
IDIOMA ESPAÑOL

E L I + F I J A R

P I C T U R E

75 CONTRAST
50 BRIGHTNESS
50 SHARPNESS
50 COLOR
00 TINT

SEL. ± A D J .

(1) QUICK VIEW Button

Press the Q. VIEW button
on the Remote Control.

The previously viewed channel will appear on the screen.
Press Q. VIEW again to switch back to the original channel.
Repeatedly pressing Q. VIEW switches between these two channels.

(2) DISPLAY Button

Press the DISPLAY button
on the Remote Control.

The channel number of the program you are now viewing and
the setting of the SLEEP TIMER are displayed as shown

(3) SLEEP Button

You can select a time period between 15 and 180 minutes after which the
television will automatically switch to power-off mode.
Repeatedly pressing the SLEEP button on the Remote Control cycles the SLEEP time as
shown below.

NOTE :

To cancel the sleep timer function, press the SLEEP button repeatedly until the word "SLEEP
OFF" is displayed.

Q. VIEW

D I S P L A Y

2 1

MORE USEFUL FUNCTIONS

4 5

SLEEP 3 0

•

As this button is repeatedly pressed, the mode will be changed as follows.

(1) USER mode

(2) STANDARD mode

(3) DYNAMIC mode

(5) NO DISPLAY

(4) MILD mode

󱈊
󱈊
󱈊

P I C T U R E

M O D E

•

Select this mode to view a picture that you
adjust to your own personal taste.

•

Select this mode to restore picture
adjustments to the normal factory-preset
m o d e .

•

Select this mode to view a powerful and
clear picture. Intended especially for view­ing in brighter(daylight)environments.

•

Select this mode to view a milder picture.
Intended especially for viewing in darker
(nighttime) environments or to lessen eye
f a t i g u e .

S T A N D A R D

U S E R

D Y N A M I C

M I L D

2 0

S TATUS BUTTON

󱎀

O F F󱎀1 5󱎀3 0󱎀4 5󱎀6 0󱎀9 0󱎀1 2 0󱎀1 5 0󱎀1 8 0

The most common types of television interference are as follows :

IGNITION NOISE:

Black spots or horizontal lines may appear, picture may
flutter or drift. Usually caused by interference from
automobile ignition systems, neon lamps, electric drills
and other electric appliances.

GHOSTS :

Ghosts are caused by the television signals following two
paths. One is a direct path and the other is reflected from
tall buildings, hills or other objects.
Changing the direction or position of the antenna may
improve the reception.

SNOW :

If you are located on the fringes of a television reception
area, the signal will be weak, and your picture may contain
many small dots.
When the signal is extremely weak, it may be necessary to
install an external sensitive antenna to improve the picture.

RADIO FREQUENCY INTERFERENCE :

This interference produces moving ripples or diagonal
streaks, and in some cases causes loss of contrast in the
p i c t u r e .

IMPORTANT NOTE :

WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR A
VIDEO CASSETTE PLAYER, VIDEO GAME, OR CAMERA.
TELEVISION BROADCAST RECEPTION WILL BE ADVERSELY AFFECTED BY CONDITIONS
SUCH AS MOTION, CHANGE OF DIRECTION, ATMOSPHERIC ACTIVITY, AND LOCAL SUR­R O U N D I N G S .
IT IS THEREFORE LIKELY THAT BROADCAST PICTURE QUALITY WILL BE MARGINAL WHEN
THIS SYSTEM IS USED IN A MOBILE ENVIRONMENT.

2 3

RECEPTION DISTURBANCE

(4) MUTE Button

Press the MUTE button on the Remote Control.

The audio from the program being viewed will be reduced almost to zero

and "VOLUME 0" will appear on the screen.

Pressing the MUTE button again will restore the audio to its original level.

(5) NOISE TIME Mode(Automatic power shut-off)

If the system is not switched off when the TV Station stops broadcasting, (or a videotape
program ends), it will automatically go to power off mode after approximately 15 minutes.

M U T E

󱍷 󱍷

2 2

MORE USEFUL FUNCTIONS

VOLUME 3 3

VOLUME 0

MODEL NO LSM64
TELEVISION SYSTEM NTSC-M

RECEIVING CHANNELS VHF 2~13CH, UHF 14~69CH,
ANTENNA IMPEDANCE 75 Ohm

DISPLAY SCREEN

DISPLAY SIZE 6.4 INCH (H 130.6mm×V 97.3mm)
DRIVE METHOD TFT ACTIVE MATRIX
DISPLAY FORMAT 960 Horizontal by 234 Vert. PIXELS

RGB STRIPE ARRANGEMENT

COLOR DEPTH FULL COLOR

POWER SOURCE DC 12 VOLT (CAR BATTERY)
POWER CONSUMPTION 11W APPROX (at DC 12 VOLT)

VIDEO 1,2,3 INPUT LEVEL 1.0±0.2Vp-p (75Ω UNBALANCED)
VIDEO OUTPUT LEVEL 1.0±0.2Vp-p (75Ω UNBALANCED)
AUDIO 1,2,3 INPUT LEVEL 400±50mVrms

SOUND OUTPUT LEVEL

-AUDIO (R/L) 400±50mVrms, 600Ω (Fix)

-EXT SPEAKER(MONO) 0.7WATT, 4Ω(Variable)

STORAGE TEMPERATURE －30℃ ~ 80℃
OPERATING TEMPERATURE －10℃ ~ 60℃
OPERATING HUMIDITY 35% ~ 80%
DIMENSION (W)208.0×(H)42.0×(D)295.0
BOX DIMENSION (W)455.0×(H)138.0×(D)358.0
NET WEIGHT 2.0Kg

ACCESSORIES

REMOTE CONTROL TRANSMITTER (TV + VCP)

EXTENSION CABLE Length=4.5Meter
BATTERY (1.5V AAA TYPE × 2)
CABLE ASS’Y
OWNER'S MANUAL
WARRANTY CARD
SAFETY TIPS

2 5

S P E C I F I C AT I O N S

N O T E: THE DEVICE DOES NOT FULLY COMPLY WITH THE FEDERAL COMMUNICATIONS

STANDARDS FOR CABLE READY CONSUMER ELECTRONICS EQUIPMENT.

S Y M P T O M

No image, no sound

•

The cigar plug or power plug is connected properly? (page 12)

•

A 24V car is connected? (page 12)

•

TV/VIDEO is selected properly? (page 15)

•

Any connection with other equipment is proper? (page 12)

Sound but no image

•

Contrast or brightness is adjusted properly? (page 19)

•

The connection with other equipments and cord are normal? (page 12)

Unstable screen and noise

•

Antenna cable is connected properly? (page 11)

•

Antenna is located properly? (page 11)

Spots on the screen

•

Is there any interfering frequency from car, sub-train,

high voltage wire?

Ripple on the screen

•

Is there any interfering frequency from FM radio or wireless telephone?

P o w e r - O F F

•

It is in no-signal condition for 15 min or more? (page 6)

•

Power plug has a faulty connection? (page 13)

Two layered image on a
CH

•

Antenna is located properly? (page 11)

•

Is there any affect by reflected frequency from a mountain or a building?

Remocon not operating
w e l l

•

Remote control is directed to the remote control sensor

on the TV? (page 10)

•

Is there any obstacle between remote control and remote

control sensor (page 10)

•

Remote control is in working distance? (page 10)

•

Battery is consumed or inserted properly? (page 10)

Image with big noise•Antenna cable is connected properly? (page 11)

No sound

•

Volume level is at minimum? (page 15)

•

Is it in MUTE mode? (page 22)

•

The connection with other equipments and cord are normal? (page 12)

Unclean color

•

COLOR & TINT are adjusted properly? (page 19)

CHECKING POINTS

N OTICE :If you need any information, please contact KEC/KTV directly at:

Outside New Jersey : [phone] From New Jersey : [phone]

2 4

TROUBLESHOOTING GUIDE

No broadcast reception
above channel 13

•

Make sure TV/CATV mode is set to TV.

•

If using antenna, check UHF antenna connections.