Keba KeContact KC-P30 Series, KeContact KC-P30 e Series, KeContact KC-P30 b Series, KeContact KC-P30 c Series, KeContact KC-P30 x Series Operating Instructions Manual
KeContact
KC-P30
Charging Station
Operating instructions V 3.26
Translation of the original instructions
Document:V 3.26
Document No.: 96166
Pages: 22
© KEBA
Specifications are subject to change due to further technical developments. Details presented may be
subject to correction.
All rights reserved.
KEBA AG Headquarters:
Gewerbepark Urfahr, 4041 Linz, Austria, Phone: +43 732 7090-0,
Fax: +43 732 7309-10, keba@keba.com
For information about our subsidiaries please look at www.keba.com.
KC-P30 Table of contents
Table of contents
1 Introduction ................................................................................................................
1.1 Representation of safety instructions...............................................................
1.2 Purpose of the document.................................................................................
1.3 Requirements...................................................................................................
1.4 Intended use ....................................................................................................
1.5 Guarantee ........................................................................................................
1.6 Notes on this document ...................................................................................
1.7 Further documentation.....................................................................................
2 Safety notes ................................................................................................................
3 Description of the charging station..........................................................................
3.1 Front view ........................................................................................................
3.2 Type plate ........................................................................................................
3.3 Overview of variants ........................................................................................
3.4 Options.............................................................................................................
4 Displays and operating elements .............................................................................
4.1 LED bar............................................................................................................
4.2 Display (optional) .............................................................................................
4
4
4
5
5
5
5
6
7
9
9
10
10
12
13
13
14
5 Authorization ..............................................................................................................
5.1 Displays and signals ........................................................................................
5.2 Authorization via RFID .....................................................................................
5.3 Authorization via key switch.............................................................................
6 Charging process.......................................................................................................
6.1 Starting the charging process ..........................................................................
6.2 Ending the charging process ...........................................................................
7 Error diagnosis...........................................................................................................
8 Maintenance................................................................................................................
16
16
16
19
20
20
20
21
22
Operating instructions V3.26
© KEBA
3
1 Introduction
This manual is valid for KC-P30 e-series, b-series, c-series and x-series.
The pictured devices used in this manual are visual examples. The figures
and explanations contained in this manual refer to a typical device design.
The devices used by you may differ in their appearance.
1.1 Representation of safety instructions
At various points in this manual, you will see notes and precautionary warnings regarding possible hazards. The symbols used have the following
meaning:
DANGER!
indicates an imminently hazardous situation, which will result in death or serious bodily injury if the corresponding precautions are not taken.
KC-P30Introduction
WARNING!
indicates a potentially hazardous situation, which can result in death or serious bodily injury if the corresponding precautions are not taken.
CAUTION!
means that if the corresponding safety measures are not taken, a potentially
hazardous situation can occur that may result in slight bodily injury.
Caution
means that damage to property can occur if the corresponding safety measures are not taken.
ESD
This symbol reminds you of the possible consequences of touching electrostatically sensitive components.
Information
Identifies practical tips and useful information. No information that warns
about potentially dangerous or harmful functions is contained.
1.2 Purpose of the document
This document describes the operation of KC-P30.
4
Operating instructions V3.26
© KEBA
KC-P30 Introduction
1.3 Requirements
This document contains information for people who want to operate a charging station.
1.4 Intended use
The charging station is intended for charging electric vehicles (such as electric cars). The connection of other devices (such as power tools) is not allowed.
The charging station is suitable for indoor and outdoor use. The charging
station has to be installed vertically on a wall or on a floor-mounted column.
The surface for the installation must be flat and suitably stable (e.g. brick
wall, concrete wall). The respective national regulations must be observed
with regard to the installation and connection of the charging station.
The intended use of the device always includes the compliance with the environmental conditions for which this device was developed.
The charging station has been developed, manufactured, tested and documented in accordance with the appropriate safety standards. If the instructions and safety instructions described for the intended use are observed,
the product will normally not pose a risk to the health of persons or damage
to property.
Not observing the safety instructions can result in risk of death, injuries and damage to the device!
The device manufacturer assumes no liability for resulting claims!
1.5 Guarantee
Only the maintenance work expressly permitted by KEBA may be performed.
Any other manipulations to the device will also result in loss of warranty.
A device with broken warranty seals or removed lead seals may no longer
be put into operation. The necessary steps for replacement or repair of the
charging station by the specialist dealer or service partner must be initiated.
1.6 Notes on this document
The manual is part of the product. It is to be retained over the entire life cycle
of the product and should be forwarded to any subsequent owners or users
of the product.
The instructions contained in this manual must be followed precisely. Failure
to do so could result in the creation of potential sources of danger or the disabling of safety devices. Apart from the safety instructions given in this manual, the safety precautions and accident prevention measures appropriate to
the situation in question must also be observed.
Operating instructions V3.26
© KEBA
5
1.6.1 Contents of the document
● Description of the charging station
● Operating behavior of the charging station
● Operation of the charging station
1.6.2 Not contained in this document
● Assembly/disassembly of the charging station
● Commissioning of the charging station
● Troubleshooting
1.7 Further documentation
Manuals and additional information are available on our website:
www.keba.com/emobility-downloads
KC-P30Introduction
6
Operating instructions V3.26
© KEBA
KC-P30 Safety notes
2 Safety notes
WARNING!
Risk of electric shock and fire hazard!
● Installation, commissioning, maintenance or retrofitting of the charging
station must be performed by correctly trained, qualified and authorized
electricians1) who are fully responsible for the compliance with existing
standards and installation regulations. For details, see the "installation
manual".
● The charging station does not have its own power switch. The line circuit
breaker of the supply line serves as a mains disconnector.
● The charging station may only be operated in a perfect condition.
● A damaged charging station must be taken out of commission and repaired or replaced by a qualified and authorized electrician.
● A repair of the charging station is not permitted and may only be carried
out by the manufacturer.
● No unauthorized conversions and modifications may be made to the
charging station.
● No markings (such as safety signs, warnings, wire markings...) may be
removed from the charging station.
● Never use faulty, worn-out or dirty charging connectors.
● The use of cable extension sets is prohibited.
● The use of adapters of any kind is prohibited.
● The charging station must be checked regularly for damage to the housing as well as for defects, wear and soiling of the charging socket or the
charging connector including the charging cable.
● Observe the information and instructions for your vehicle carefully before
you charge the vehicle using the charging station.
1)
Persons who, due to their special training, expertise and experience as
well as knowledge of current standards, are able to assess the work performed and the possible hazards.
Operating instructions V3.26
© KEBA
7
Loading...