KEBA 0006 Users Manual

RFID-Module Introduction

Kemro K2

XE 020/C RFID-Module

Internal Technical Documentation V 1.0

Introduction XE 020/C

Version

changed

from / to

Date

Description

Modified

by

1.0

10-2015

Created (derived from XE 020/A)

dbg

List of changes

RFID-Module Introduction

Contents

1 Introduction ................................................................................................................... 5

1.1 Purpose of the document ..................................................................................... 5

1.2 Audience and prerequisites ................................................................................. 5

1.3 Intended use ........................................................................................................ 5

1.4 Notes on this document ....................................................................................... 6

1.4.1 Contents of document .............................................................................. 6

1.4.2 Not contained in this document ................................................................ 6

1.5 Documentation for further reading ....................................................................... 7

2 Safety notes .................................................................................................................. 8

2.1 Representation .................................................................................................... 8

3 Product overview .......................................................................................................... 9

3.1 Summary ............................................................................................................. 9

3.1.1 Range and detection .............................................................................. 10

3.2 RFID module before installation ......................................................................... 10

3.3 RFID module after installation ............................................................................ 11

4 Assembly and installation notes ................................................................................ 12

4.1 Space requirements ........................................................................................... 12

4.2 Installing the RFID module ................................................................................. 12

5 Connections and wiring ............................................................................................. 14

5.1 EMC and wiring guidelines ................................................................................ 14

5.1.1 Personal safety ...................................................................................... 14

5.1.2 Why EMC-aware wiring? ........................................................................ 14

5.1.3 Which EMC measures must be taken? ................................................... 14

5.2 Power supply ..................................................................................................... 14

5.3 XE 020/C module interfaces .............................................................................. 15

5.3.1 Internal Connector for coaxial antenna cable.......................................... 15

5.3.2 Internal Connector for status LED .......................................................... 15

5.3.3 XE 020/C module RJ45 socket ............................................................... 15

5.4 Cables ............................................................................................................... 16

5.4.1 Coaxial antenna cable ............................................................................ 16

5.4.2 Connector cable for RFID status LED..................................................... 16

5.4.3 Connector cable for RFID module / OP 3xx ............................................ 16

6 Configuration .............................................................................................................. 17

6.1 RFID module DIP switch .................................................................................... 17

7 Status display.............................................................................................................. 18

7.1 RFID status LED ................................................................................................ 18

7.1.1 Boot-time behaviour ............................................................................... 18

8 Maintenance and repair notes .................................................................................... 19

Introduction XE 020/C

8.1 Maintenance ...................................................................................................... 19

8.2 Repair ................................................................................................................ 19

8.2.1 Packaging and shipping ......................................................................... 19

8.3 Waste disposal .................................................................................................. 19

9 Accessories and spares ............................................................................................. 20

10 Technical specification ............................................................................................... 21

11 Relevant EC directives and applicable standards .................................................... 22

11.1 EC directives ..................................................................................................... 22

11.2 Standards .......................................................................................................... 22

11.2.1 Validating conformance to the R&TTE directive .................................... 22

11.2.2 Other standards .................................................................................... 22

11.2.3 USA standards ..................................................................................... 22

RFID-Module Introduction

1 Introduction

1.1 Purpose of the document

This planning manual describes the structure, installation and connection of

the XE 020/C RFID (Radio Frequency Identification) module.
The XE 020/C is only intended for use in conjunction with an operating
panel from KEBA. The application and functionality of the RFID module is

the same for each operating panel.

1.2 Audience and prerequisites

The planning manual is geared towards those who are using or intend to
deploy an operating panel with RFID module.

Only electrical technicians who are qualified to the VDE 1000-10 standard
are permitted to install and maintain the operating panel.

This means personnel who:

 can evaluate the work to be carried out and recognise the possible

hazards based on their technical training, knowledge and experience
plus their expertise in the applicable standards.

 have a level of knowledge equivalent to that obtained through

professional training as a result of several years experience working in
a similar field.

1.3 Intended use

The intended use of the XE 020/C module includes deployment in KEBA
operating panels.

The XE 020/C module is used in conjunction with an RFID card for
contactless logon and logoff (as per ISO 15693) and is employed for user
identification. This replaces the login of a user with username and
password.

The RFID module may not be used to fulfill protection requirements in the
area of personal safety to prevent a malfunction compromising personal
safety.

Introduction XE 020/C

1.4 Notes on this document

1.4.1 Contents of document

 RFID module description
 Assembly and installation notes
 Description of the connections and wiring including EMC measures
 Description of the configuration
 Description of the status display
 Maintenance notes
 Accessories
 Technical specification

1.4.2 Not contained in this document

 Operating panel description

(see “XE 020/C – RFID module – Project engineering manual V 1.00”)

RFID-Module Introduction

Description

Target group

Project engineering manual of the KEBA
operating panel

● Project engineer

● Electrician

● Programmers

● Start-up operator

● Service technician

1.5 Documentation for further reading