Keating 14CM Service Manual

www.keatingofchicago.com 1-800-KEATING

SERVICE INSTRUCTIONS

019017

BASKET LIFT HOUSING 14ZS & 14CM ASSEMBLY

120V MOTORS

Part #019017

Installation Instructions

1. Open control panel and detach it from fryer cabinet.

2. Install the relay assembly with provided hardware to matching holes on control panel back.

3. Attach control panel to fryer cabinet.

4. Cut wire #26 from connector on common prong of high limit test switch and remove it. Reconnect wire #56
from over heat light to ready cook light. Cut wire #23 from connector on left side prong of Melt-Idle-Fry switch
and remove it with wire #53 together.

5. Connect wires drawn with thicker lines on the diagram as shown using attached connectors.
NOTE: Pink connectors go to the relay as shown below

6. Close control panel.

7. Test fryer.

Part No. 019017