KD Scientific EZFLOW 2020 User Manual

KDS EZFlow 2020/2021

Syringe Driver Pump

User’s Manual

Publication 5616-004-REV-A

KDS EZFlow 2020/2021

Contents

General Information ..............................................................................................................2

General Safety Summary......................................................................................................2

Specifications..........................................................................................................................3

Parts and Accessories............................................................................................................3

Keypad Function:

Control Panel ............................................................................................................4

Keypad Description..................................................................................................5

Alarm Indicators ........................................................................................................5

Operation Instructions............................................................................................................6

Storage....................................................................................................................................6

Limited Warranty....................................................................................................................7

1

KDS EZFlow 2020/2021

General Information

This high-volume syringe pump is a conventional device for research and development labs
and universities. This syringe pump offers a reliable alternative for fluid control, especially
suitable for short-term, high speed thick fluid and precise injections.

CAUTION

Important: User should read this entire manual before operating this micro-infusion syringe
pump.

Keep this manual for future reference!

General Safety Summary

WARNINGS:

1) Do not use a pump, syringe, or accessories that show any sign of damage.

2) Manufacturer assumes no responsibility for incidents that occur if the pump is not

repaired according to manufacturer-authorized procedures.

3) Prime the syringe and extension tube to prevent air prior to using the pump.

4) To clean the pump, use a damp (not wet) cloth or sponge. Do not immerse pump

or power cable into water or other cleaning solution.

CAUTION

Refer to Manual

Protective Ground
Terminal

2