KDDI HI-VISION CAM WOOO User Manual

Download

Illustrationsand Screenshots inThisManual

Noteson CellPhoneUse

Contents

GettingReady

Makingand AnsweringCalls

GlobalFunctions

BasicManual

rea d thi s ma nua l to ma ste r

the cellular phone

CharacterInput

AddressBook

PairFunction

Mail

Movie/Camera

EZweb

EZNewsFlash/ auoneGadget

EZNavi

TV(1Seg)

InCaseofLossofYour MobileHi-VisionCAMWooo

Troubleshooting

Index

Introduction

Thank you for purchasing the Mobile Hi-Vision CAM Wooo. Before using your cell phone, be sure to read the cell phone Basic Manual (this PDF manual) to ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe places so you can retrieve them whenever you need them.

Manuals for the cell phone

The cell phone comes with the Instruction Manual.

● For learning the basics:

Read the cell phone Basic Manual (this manual).

● For learning details on using each function:

Read the supplied cell phone Instruction Manual (Japanese). Be sure to read the Safety Precautions “安全上のご注意” to ensure proper usage of the cell phone.

The keyword searchable au Online Manual is also available on the au homepage: http://www.au.kddi.com/manual/index.html

To access from EZweb: R

•

⇒ au one Top ⇒

オンラインマニュアル

auお客さまサポート

(Online Manual)

(au Customer Support) ⇒

Scan this QR code to access the au Online Manual.

▶

Illustrations and Screenshots in This Manual

Note on Illustrations

■

The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key illustrations are also simplified as shown below.

Key Illustration Key Illustration

⑯

① & ⑨ F

⑤

①

① ②

② ③

③

④

⑩

Note on Screenshots

■

⑥

⑥ ⑦

⑦ ⑧

⑧ ⑨

⑨

⑫

⑫ ⑬

⑬ ⑭

⑪

⑭

The screenshots in this manual are simplified and may look different from the actual cell phone screens.

•

The display design themes of the cell phone vary by model color. The screenshots for the Rays Blue models are used in this manual.

② L ⑩ w

⑮

③ N ⑪ x

123 456

④

789

⑫ (

*0#

⑤ cjsa ⑬ o ⑥ % ⑭ f ⑦ R ⑮ z ⑧ C ⑯ b

Illustrations and Screenshots in This Manual

Notes on Cell Phone Use

Cell Phone Etiquette

The cell phone always emits weak radio waves when power is on. Use the cell phone in an enjoyable and safe manner without forgetting to be considerate of others around you.

●

Use of cell phones is not allowed in some places.

•

Do not use the cell phone while you are driving. Doing so is both dangerous and prohibited by law.

•

Using a cell phone in an aircraft is prohibited by law. Set Airplane Mode to ON and turn the cell phone power off.

●

Radio waves from cell phones may interfere with medical electrical equipment.

•

Some people close to you in crowded places such as packed trains may be using a cardiac pacemaker. Turn the cell phone off in such places.

•

Abide by the rules of hospitals and other medical institutions where it is forbidden to use or carry cell phones.

●

Be considerate of where you use the cell phone and how loudly you talk.

•

Do not make calls in theaters, museums, libraries, and other similar places. Turn power off or turn on manner mode not to disturb others around you by ring tones. Do not use the cell phone on a street where you might

• interrupt the flow of pedestrians. Move to areas where you will not inconvenience others

• on trains or in hotel lobbies. Refrain from talking in a loud voice.

•

Obtain the permission of other people before you take

• their photos with the cell phone's camera. Do not record information with the cell phone's camera

• in bookstores and other locations where taking photos is not permitted.

Do Not Use the Cell Phone While Driving!

Turn off your cell phone or put it in Drive Mode while driving.

Do not use the cell phone while driving a car/motorcycle or riding a bicycle. It may result in a traffic accident. Using a cell phone while driving is prohibited by law. Using a cell phone while riding a bicycle may also be punishable by law.

Prohibited!

Looking at a cell phone display

• Talking on a cell phone while holding it

•

Drive Mode

In Drive Mode, a Japanese message meaning "I'm driving now, so I can't answer your call." is played when a call is received, and asks the caller to leave a message on the answer memo. When the standby screen is displayed, press

to select Drive, and then press (Set).

, use

Disaster Message Board Service

When a large scale disaster occurs, you can register your safety information from EZweb. The registered information can be referred from anywhere in Japan from EZweb or Internet.

When a large scale disaster occurs,

Registering

safety

information

Inquiring

for safety

information

Access

• from an au phone, you can register your safety information (i.e. your condition and comments) to the 災害用伝言板 (Disaster Message Board) created on the EZweb. After registration of your safety

• information, e-mail is sent to your family or acquaintances you have previously designated to notify that your safety information has been uploaded to the 災害用伝言板 (Disaster Message Board).

You can inquire for safety information

• of a person by entering his/her phone number from EZweb or Internet.* * To inquire from other carriers' cell

phone, a PHS or PC, access "http://dengon.ezweb.ne.jp/

⇒ au one Top ⇒

R Message Board)

http://dengon.ezweb.ne.jp/

災害用伝言板

(Disaster

•

The maximum storage period of the registered information is 72 hours.

•

The maximum available number of registrations is 10 per phone number. When the number of registrations exceeds 10, the oldest one is overwritten. The demonstration of this service can be referred to

• anytime by pressing

サポート

⇒ (Demo Version)).

•

To view the Disaster Message Board in English, select English from the top menu of the Disaster Message Board.

(au Customer Support) ⇒

災害用伝言板（デモ版）

⇒ au one Top ⇒

(Disaster Message Board

auお客さま

調べる

(Search )

Notes on Cell Phone Use

Introduction

Illustrations and Screenshots in This Manual

Contents

Notes on Cell Phone Use 2

Cell Phone Etiquette …………………………………… 2 Do Not Use the Cell Phone While Driving! …………… 2 Disaster Message Board Service …………………… 3

Contents 4

Getting Ready 6

Checking the Contents of the Box …………………… 6 Names of Parts ………………………………………… 7 Position of Mobile Hi-Vision CAM Wooo ……………… 8 Charging the Battery Pack …………………………… 9 Learning the Basics …………………………………… 10 Turning On Power ……………………………………… 11 Switching the Display Language to English ………… 11 Initial Setup of E-mail and EZweb …………………… 11 Checking Your Phone Number and E-mail Address … 11 Display Indicators ……………………………………… 12 Using Main Menu ……………………………………… 13 Using Wide Open Menu ……………………………… 15 Changing Your E-mail Address ……………………… 16 Security Code and Passwords ………………………… 17

Making and Answering Calls 18

Making a Call …………………………………………… 18 Making an International Call …………………………… 18 Answering a Call ……………………………………… 19 Returning a Call (Outgoing History/Incoming History One-ring Calls …………………………………………… 19 Adjusting the Earpiece Volume during a Call ……… 20 Turning On Manner Mode ……………………………… 20 Changing the Incoming Ring Tone …………………… 20 Adjusting the Incoming Ring Tone Volume …………… 21 Turning On the Answer Memo ………………………… 21

) … 19

Global Function 23

Setting Area …………………………………………… 23 Obtaining the Latest PRL (Preferred Roaming List) … 23 Calling Japan from Overseas ………………………… 24

Character Input 25

Character Entry Modes ………………………………… 25 Entering Alphanumeric Characters …………………… 25 Entering E-mail Addresses …………………………… 26 Entering Pictograms …………………………………… 27

Address Book 28

Saving a Address Book Entry ………………………… 28 Dialing from the Address Book ……………………… 28 Editing Address Book Entries ………………………… 28 Saving a Phone Number from the Incoming or Outgoing History …………………………………… 29

Pair Function 30

Registering a Pair Partner …………………………… 30 Making a Call to a Pair Partner ……………………… 30 Sending Mail to a Pair Partner ………………………… 30

Mail 31

Using E-mail …………………………………………… 31 Creating and Sending E-mail Messages …………… 31 Reading Received E-mail Messages ………………… 32 Reading an E-mail Message with an Attached Photo or Movie ……………………… 32 Replying to Received E-mail Messages ……………… 32 Rejecting Spam ………………………………………… 33 Using C-mail …………………………………………… 34 Creating and Sending C-mail Messages …………… 34 Reading Received C-mail Messages ………………… 34

Movie/Camera 35

Using HD Movie ………………………………………… 35 Recording an HD Movie ……………………………… 36 Using Movie/Photo ……………………………………… 38 Recording a Movie ……………………………………… 39 Photo Taking Tips ……………………………………… 40 Taking a Photo ………………………………………… 41

EZweb 42

Accessing Sites ………………………………………… 43 Bookmarking Frequently Accessed Pages ………… 44 Viewing Bookmarked Pages …………………………… 44 Checking Charges ……………………………………… 45 Downloading Chaku-Uta-Full

/Chaku-Uta® ………… 45

EZ News Flash/au one Gadget

Basic Operations ……………………………………… 46 Setting EZ News Flash ………………………………… 46

EZ Navi 48

Passenger Seat Navi for People in the Passenger Seat to Check the Route ………… 48 Security Navi to Check Where Your Kids Are ……… 48 EZ Navi Walk for When You Go Out ………………… 49 Evacuate Navi to Guide You Home or to Nearby Evacuation Areas during Disasters …………………… 50

TV (1Seg)

Initial Setup of au Media Tuner ………………………… 52 Watching TV (1Seg) …………………………………… 52 Basic Operations ……………………………………… 53 Viewing in Wide Open Position ……………………… 53 Exiting the au Media Tuner …………………………… 53

In Case of Loss of Your Mobile Hi-Vision CAM Wooo

Setting Conditions for Activating the Remote Ctrl Lock Remotely Activating the Remote Ctrl Lock on Your cell phone ……………………………………… 54 Activating the Remote Ctrl Lock by the Security Lock Service ………………………… 55

…… 54

Troubleshooting 56

Index 58

Contents

Getting Ready

Checking the Contents of the Box

The box contains the cell phone and accessories.

Cell phone• Battery pack• USB Cable (sample)

Getting Ready

•

The following accessories are not included.

- Desktop holder - AC adapter - Earphone jack conversion adapter

- Stereo earphone Purchase a specified AC adapter (sold separately). The USB cable (a sample) and the microSD memory card (a sample) are not guaranteed against failure.

•

microSD™ memory card (sample)

•

CD-ROM

•

CD-ROM Booklet (Japanese)

•

Instruction Manual (Japanese)

•

Warranty (Japanese)

•

Safety Precautions (Japanese)

•

Global Passport CDMA Owner’s Guide (Japanese)

•

Osaifu-Keitai

•

JIBUN BANK Launcher Operation Guide (Japanese)

Guide (Japanese)

Names of Parts

From the Front■

Earpiece

Display

Center key

Center key Cursor key

Cursor key

Optical sensor

Optical sensor Address book

Address book

key

Mail key

Answer/Pair

key

Number keys

Multi key

Built-in

antenna

Application key

Application key EZ key

EZ key Clear/Memo

Clear/Memo key

key End/Power key

End/Power key

Microphone

Microphone 1-Second Quick

1-Second Quick Start indicator

Start indicator (LED)

(LED) HD/1-Second

HD/1-Second Quick Start key

Quick Start key

From the Back■ From the Sides■

Built-in

antenna

Movie

microphone

Incoming

Incoming indicator

Photo light/

Pocket light

Camera start

indicator

Speaker

Infrared

port

Battery pack/

cover

* Do not remove this card unnecessarily

as your phone number is recorded on it.

indicator (LED)

(LED)

Camera

Camera lens

lens

FeliCa

FeliCa mark

mark

au IC-Card*

External connection jack cover

TV antenna

Lock Knob

External

connection

jack

microSD

memory

card slot

microSD memory

microSD memory card slot cover

card slot cover

HDMI

Strap eyelet

Mini Connector jack cover

Charging terminals

Manner key

Charge

Charge indicator

indicator

Up/Down key (side)

Zoom key

Record key

HDMITM Mini

HDMITM Mini Connector jack

Connector jack

Getting Ready

Position of Mobile Hi-Vision CAM Wooo

Cell phone can be used in the Regular Open Position (with the display vertically open), in the Wide Open Position (with the display horizontally open) and in the Movie Open Position (suitable for HD movie shooting).

Regular Open Position/ Wide Open

■

Getting Ready

Position

Lock Knob

Slide the lock knob in the direction of the arrow and open/close the display.

Movie Open Position

■

Make sure the display is firmly closed, then open it 90 degrees and be sure it clicks.

Open the display in the direction of the arrow with it firmly closed.

Regular open position

Wide open position

•

When re-opening from Regular open position to Wide open position, or from Wide open position to Regular open position, always close your cell phone before re-opening. If you force power when your cell phone is not closed, it may cause damage. In Regular open position and Wide open position,

• do not force to close your cell phone except to the direction it closes. It may cause damage. When changing the position, take care not to touch the

• key with your fingers. It may cause malfunction. If the lock knob unlocks and the display moves with

• the cell phone in the Regular Open Position or Movie Open Position, slide the lock knob and move the display to the original position. You can not make call in Wide open position. If you

• receive a call in Wide open position, re-open cell phone in Regular open position before answering. In Wide open position, you can make or answer a call only when flat-type switched earphone microphone (sold separately) or flat-type stereo earphone microphone (sold separately) is attached, when a Bluetooth When carrying cell phone, close the main unit.

•

device is connected by handsfree call.

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase. Be sure to charge the battery pack before using the cell phone for the first time.

An AC adapter is not included. Purchase a specified AC

• adapter (sold separately).

1-2

1-1

Connect a specified AC adapter to the cell

➡

phone with the battery pack attached.

Open the cover of the external connection jack. Check

• the shape of the connector of the AC adapter, and plug it straight into the external connection jack.

Unfold the power plug of the AC adapter and

➡

plug it into a 100 V AC power outlet.

Confirm that the charge indicator lights.

➡

Charging: A charge beginning sounds and the charge

• indicator lights. Charging finished: A charge completion sounds and

• the charge indicator goes out.

Be sure to close the cover of the external connection

• jack when charging is finished. Do not pull or twist the cover of the external

• connection jack forcibly. Be sure to use the common AC adapter 02 (sold

• separately) when charging overseas.

Getting Ready

Learning the Basics

Key Assignments

■

: Display Incoming History.

: Display Main menu.

Getting Ready

: Display Notification

window/Shortcut menu.

: Use Address Book.

: Display E-mail/C-mail menu.

: Make/answer calls.

Use the Pair function.

: Set/cancel Answer memo.

Delete characters.

Cancel operation.

: Display multi play window.

Side Key Assignments

■

o: Activate Pocket light.

Set/cancel manner mode.

: Display the ticker field, info pane and

gadget (setting icon).

: Display Outgoing History.

: Display EZapps menu.

: Display EZ Service menu.

: Turn power on/off.

End call/communication.

Cancel operation.on.

0〜9*#

Input phone numbers and characters.

: Activate HD Movie.

If you press HD/1-Second Quick Start

Key when the movie monitor screen is

Key when the movie monitor screen is displayed, the 1SecQuickStart mode

displayed, the 1SecQuickStart mode will be on.

will be on.

z: Zooming in or out

during movie or

during movie or photo shooting.

photo shooting.

Activate au Media Tuner.

b: Activate Movie.

If you lose track of where you are or if you make a mistake, press to return to the previous screen. Return to the

• standby screen by holding down

for at least one second.

Hiding/Redisplaying the

■

Notification windowNotification window

Notification Window

When the Notification window is displayed on the standby screen, you can temporarily hide it by pressing & (Back) and then display the Main menu by pressing c. To redisplay the hidden Notification window, press d when the standby screen is displayed.

Turning On Power

Hold down F for at least a few seconds.

You cannot receive or make calls if (out of range

• indicator) is displayed.

Turning Off Power

■

When the standby screen is displayed, hold down F for at least one second.

Switching the Display Language to English

You can switch the display language for function names and other items to English.

When the standby screen is displayed, press c.

Use a to select

➡

press c (選択 [Select]).

機能

(Function) and then

Use j to select

➡

画面表示

(Screen Display) and

then press c (選択 [Select]). Use j to select Set Language and then press

➡

c (選択 [Select]). Use j to select English and then press

➡

c (Set).

Initial Setup of E-mail and EZweb

To use e-mail and EZweb, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, you need to configure initial settings. Your e-mail address is assigned automatically in the initial setup.

When the standby screen is displayed, press L.

➡

Press c (OK).

After a short while, your e-mail address is displayed.

➡

Press c (OK).

The initial settings are complete.

You can also configure initial settings by pressing

• or

Checking Your Phone Number and E-mail Address

When the standby screen is displayed, press c and then 0.

Getting Ready

Display Indicators

Display indicators inform you of mail arrival, current settings, etc.

Display

■

①

② ③ ④⑤

Getting Ready

⑫

⑭

⑯⑰⑱

⑥⑧⑦⑨⑩

⑪

⑬

⑮

Indicator Description

① ② ③

④

⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱

Signal strength

Battery level

A microSD memory card (sample) inserted

During a call

au Media Tuner activated

EZapps activated

Connecting to EZweb

Receiving EZ News Flash information

Missed calls

New or unread e-mail/C-mail

Current date and time

Ticker field

Search window

Info pane

Notification icon

Shortcut menu

Auto Lock/Side key disable feature on

Manner mode set

Answer memo or manner mode set

Using Main Menu

You can access various functions from the Main menu. The Main menu patterns vary by model color. The screenshots for the Rays Blue models are used in this manual.

Model Color Main Menu Pattern

Rays Blue Hologram

Mica Black Neo-Black

Cassis Red Mosaic

Getting Ready

Each Main menu pattern has a different set of items.

Hologram Neo-Black Mosaic Simple

Getting Ready

HD Movie LISMO Player LISMO Player Movie/Photo

Wooo Link Data Folder Data Folder TV

Camera microSD

TV Function Function Data Folder

LISMO Player TV TV microSD

Function HD Movie HD movie JIBUN BANK

Data Folder Wooo Link Wooo Link Settings

microSD JIBUN BANK Watch/Calendar Accessories

Infrared Comm Camera Camera

EZ FeliCa Infrared Comm Infrared Comm

Watch/Calendar EZ FeliCa EZ FeliCa

Accessories Accessories Accessories

microSD LISMO Player

Using Wide Open Menu

The menu only for Wide open position is prepared in cell phone.

Wide Open Menu

View PC Documents

Watch Video

View Photos

Play List

Watch Movie

Wooo Link

Open User Folder

TV(1Seg)

PC Site Viewer

Getting Ready

Changing Your E-mail Address

You can change the account name of your e-mail address.

Getting Ready

When the standby screen is displayed, press L.

Use j to select E-mail Setup and then press

➡

c (Select). Use j to select Other and then press

➡

c (Select).

The cell phone connects to the server.

Use j to select

➡

E-mail Address) and then press c (Select). Use j to select the entry box, press c (Input),

➡

enter your security code, and then press c (OK).

Your security code is the four-digit number you wrote

• on your subscription form. If the security code is incorrectly entered three times

• consecutively during a single day, the e-mail address change operation will be disabled until the next day.

Use j to select 送信 (Send) and then press

➡

c (Select).

Eメールアドレスの変更

E-mail address

△△△@ezweb.ne.jp

Account name Domain name

(Change

Use j to select

➡

承諾する

(Accept) and then

press c (Select). Use j to select the entry box, press c (Input),

➡

enter an e-mail address using single-byte alphanumeric characters, and then press c (OK).

For details on entering e-mail addresses, see page 26.

•

Use j to select 送信 (Send) and then press

➡

c (Select). Use j to select OK, press c (Select) and then

➡

c (OK).

Check that the e-mail address has been updated

•

before pressing c (OK).

Your e-mail address cannot be changed if the new

• address you enter in the above procedure is already being used. In this case, enter a different e-mail address.

Security Code and Passwords

You can use a security code and other passwords described below. Take care not to forget your security code and passwords, because they are required for performing various operations and using subscription services.

Security Code

■

①Using the Answering Service (Voice

Mail) and Call Transfer remotely from a fixed-line phone

Usage Example

Initial Setting

Lock No.

■

Usage Example

Initial Setting

②Making inquiries, applications, and

changes while using au Customer Service Center voice guidance, au web pages, and EZweb

③Changing the settings of Mail Filter or

Other under E-mail Setup

The four-digit number you wrote on your subscription form

Changing various settings of the cell phone

1234

EZ Password

■

Usage Example

Initial Setting

■

Premium EZ Password

Usage Example

Initial Setting

Subscribing or canceling subscriptions to EZweb fee-based contents

The four-digit number you wrote on your subscription form

①Subscribing or canceling subscriptions

to EZweb fee-based contents paid by

まとめて

Payment Service)

②Purchasing products from EZweb sites

using

まとめて

Payment Service)

The four-digit number you wrote on your subscription form

支払い

Getting Ready

(au Collective

Making and Answering Calls

Making a Call

When the standby screen is displayed, use 0 to 9 to enter a phone number.

•

When calling to a fixed-line phone, you also need to enter the area code.

Making and Answering Calls

Press N.

➡

To end the call, press F.

•

After you enter a phone number, you can add 184 or

• 186 to the phone number as follows:

Press

➡

Use

➡

Use

➡

184: When you do not want to inform the other party of

186: When you want to inform the other party of your

You can not make call in Wide open position.

•

(Call).

to select Add Special No. and then press

(OK).

to select 184 or 186 and then press (Add).

your phone number.

phone number.

Making an International Call

001 International Call Service

■

Available without any additional application Example: To call 212-123-△△△△ in the USA

Enter the access code, a country code, area code and phone number, and then press N.

001

↑

KDDIinternational

accesscode

International call charges are billed together with

• monthly local call charges. For more information on 001 International Call Service,

• dial either of the following numbers: From au cell phones (toll-free): 157 (area code not required) From fixed-line phones (toll-free): 0077-7-111 (Open 9:00 to 20:00 everyday)

010 212 123-XXXX1001

010 212 123-XXXX1

Country

code

(USA)

↑

Areacode↑Phonenumber

Answering a Call

To answer a call, press N.

•

To end the call, press F.

•

You can not make call in Wide open position.

Display When a Call is Received

■

The phone number of the caller appears. If the caller's phone number and name are in the Address book, the name is also displayed. When the phone number of the caller is not displayed, one of the following indicators may appear.

Indicator Meaning

ID Unsent

Payphone

Not Support

Missed Call Notification

■

If you did not answer a call, displayed to let you know that you missed a call. To check the caller's phone number, use s to select Missed Call and then press c (Select). You can then return the call (see the procedure on the right).

The caller did not send a Caller ID.

The call is from a pay phone.

The call is from a phone that does not support Caller ID.

and Missed Call are

Returning a Call (Outgoing History/ Incoming History)

Example: Returning a call to a phone number in the

When the standby screen is displayed, press l.

•

➡

•

incoming history

Press r while the standby screen is displayed to display the Outgoing History screen.

Use j to select the phone number you want to call and then press c (Detail).

Press r to display the Outgoing History screen.

•

Press N.

The cell phone can store up to 50 phone numbers in each of the incoming and outgoing history.

One-ring Calls

What is a One-ring Call?

■

A one-ring call is a call from an unknown caller that only rings once, causing it to be stored in the incoming history. One-ring calls are often used to get you to return the call, which will connect you to a dating service or some other service that charges you at high rates.

Making and Answering Calls

One-ring Indicator

■

indicator on the Incoming History screen indicates you have received a one-ring call (a call rang for three seconds or shorter). Be careful when you return a call to an unknown caller.

Even in manner mode, the cell phone still emits a

• sound when autofocusing, a shutter sound when you take a photo.

Changing the Incoming Ring Tone

Adjusting the Earpiece Volume during a Call

Making and Answering Calls

During a call, use j.

u: Increases the volume.

•

d: Decreases the volume.

•

Press c (OK).

➡

Turning On Manner Mode

When the standby screen is displayed, hold down ( for at least one second.

This turns on manner mode, and displays , , and

on the standby screen. This also turns on Answer

memo, which is indicated by

Turning Off Manner Mode

■

When the standby screen is displayed, hold down ( for at least one second. Turning off manner mode causes disappear from the standby screen. Answer memo is also turned off, which is indicated by standby screen.

on the standby screen.

, , and to

disappearing from the

When the standby screen is displayed, press c.

Use a to select Function and then press

➡

c (Select). Use j to select Sound/Vib/Lamp and then

➡

press c (Select). Use j to select Incoming Setup and then press

➡

c (Select). Use j to select Incoming Call and then press

➡

c (Select). Use j to select

➡

(Ringtone) and then press

c (Select).

➡

Use j to select Original and then press c (Select).

➡

Use j to select a ring tone and then press c (Set).

The incoming ring tone is set.

If you press & (Play), the tone plays.

•

Press % (OK).

➡

Adjusting the Incoming Ring Tone Volume

When the standby screen is displayed, press c.

Use a to select Function and then press

➡

c (Select).

➡

Use j to select Sound/Vib/Lamp and then press c (Select).

➡

Use j to select Incoming Setup and then press c (Select).

➡

Use j to select Incoming Call and then press c (Select).

➡

Use j to select then press c (Select).

➡

Use j to adjust the volume and then press c (Set).

Each press of j changes the volume one step.

•

STEP ↑ STEP↓

Level5 󱽘 Level1

OFF

Press % (OK).

➡

The ring tone volume gradually increases.

The ring tone volume gradually decreases.

The ring tone sounds at the set volume.

The ring tone does not sound.

(Ringtone Volume) and

Turning On the Answer Memo

When the standby screen is displayed, hold down C for at least one second.

is displayed on the standby screen.

Turning Off the Answer Memo

■

When the standby screen is displayed, hold down C for at least one second. The answer memo is turned off and disappears from the standby screen.

The cell phone can record a maximum of ten

• messages, each up to 60 seconds long. Answer memo is a function that automatically answers

• calls and allows callers to record messages. Use the Answering Service (Voice Mail) when your phone is turned off or when you are in a location where a signal cannot be received.

Playing a Message

■

If a message is recorded, Answer Memo appears on the standby screen.

Use s to select Answer Memo and then press

➡

c (Select). Use j to select the message you want to play

➡

and then press c (Play).

To stop playing the message, press c (Stop).

•

Making and Answering Calls

Deleting a Message

■

When the standby screen is displayed, press C.

Use j to select Answer Memo and then press

➡

c (Select).

➡

Use j to select Answer Memo List and then press c (Select).

Making and Answering Calls

➡

Use j to select the message you want to delete and then press % (SubMenu).

➡

Use j to select Delete and then press c (OK).

➡

Use j to select Delete One and then press c (OK).

➡

Use j to select YES and then press c (OK).

Global Function

The cell phone supports Global Passport CDMA services. You can use your cell phone overseas without any additional application.

Setting Area

When the standby screen is displayed, press c.

Use a to select Accessories and then press

➡

c (Select). Use j to select GLOBAL Function, press

➡

c (Select).

Precautions are displayed.

•

Use j to select Area Setting and then press

➡

c (Select). Use j to select Overseas and then press

➡

c (Select).

Some functions are not available when Area Setting is

• not set to Japan.

Obtaining the Latest PRL (Preferred Roaming List)

Manually update and set the PRL (preferred roaming list) before traveling abroad.

When the standby screen is displayed, press c.

Use a to select Accessories and then press

➡

c (Select). Use j to select GLOBAL Function and then

➡

press c (Select).

Precautions are displayed.

•

Check the precautions and then press

➡

c (OK). Use j to select PRL Setting and then press

➡

c (Select). Use j to select PRL Manual Update and then

➡

press c (Select).

The cell phone connects to the server.

•

Use j to select PRL

➡

PRL) and then press c (ダウンロード [Download]).

The latest PRL is downloaded.

•

ダウンロード

(Download

Global Functions

•

The PRL (preferred roaming list) is the area information of overseas carriers offering international roaming service in partnership with KDDI (au).

•

To obtain (download) the PRL, you need to subscribe to EZweb and make initial settings (see page 11) while in Japan.

Calling Japan from Overseas

Global Functions

When the standby screen is displayed, use 0 to 9 to enter a phone number.

Press c (Call).

➡

Use j to select Voice Call and then press

➡

c (OK). Use j to select Call to Japan and then press

➡

c (OK). Press c (Call).

➡

When you make an international call from Japan to a

• Global Passport CDMA-compatible cell phone, you can do it in the same way as making domestic calls within Japan.

Character Input

Character Entry Modes

When a character entry screen is displayed, you can select a character entry mode if you press & (Char.Type).

Menu Items

■

: Kanji conversion mode : Double-byte katakana mode : Single-byte katakana mode : Double-byte alphanumeric mode : Single-byte alphanumeric mode : Double-byte number mode : Single-byte number mode

Use a to select a character entry mode and then press c (OK).

Entering Alphanumeric Characters

You can use the keys 1 to 0 to enter characters. More than one character is assigned to each key. The following table shows the key assignment for entering characters.

Number of Times to Press the Key

Key123456789101112

．

2 ａｂｃA B C 2

3 ｄｅｆD E F 3

4 ｇｈｉG H I 4

5 ｊｋｌJKL5

6 ｍｎｏMN O 6

7 ｐｑｒｓP Q R S 7

8 ｔｕｖT U V 8

9 ｗｘｙｚWX Y Z 9

0 0

When you change your e-mail address, you cannot use the characters in address to the left of @).

＠−＿／：

Inputs symbols (switches an unconfirmed character between uppercase and lowercase).

Adds a line break and displays characters in the opposite order.

■

for the account name (part of the

〜

Inputs symbols

Character Input

Entering Two or More Characters

■

Assigned to the Same Key

After you enter the first character, press r and then enter the next character.

■

Deleting Characters

To delete one character at a time, move the cursor to the character you want to delete and then press C. To delete all characters to the right of the cursor, hold down C for at least one second. If there are no characters to the right of the cursor, holding down C will delete all the

Character Input

characters.

■

Starting a New Line

Press #.

Certain functions such as C-mail do not support

• entering new lines.

Entering E-mail Addresses

E-mail Address Compatible Characters

■

Before you enter an e-mail address, switch to the

• lowercase alphanumeric (single-byte) mode. When changing your e-mail address, you can enter up

• to 30 single-byte alphanumeric and symbol characters for the account name (part to the left of @). Note the following:

- Uppercase characters cannot be used.

- Period (.) or zero (0) cannot be used as the first character.

How to Enter E-mail Addresses

■

Example: Entering "taro.23@kddi.co.jp"

Enter "taro.23".

t : Press 8 once. a : Press 2 once. r : Press 7 three times. o : Press 6 three times. . : Press 1 once. 2 : Press 2 once and then #. 3 : Press 3 once and then #.

Enter "@".

➡

@: Press 1 twice.

➡

Enter "kddi".

k : Press 5 twice. d : Press 3 once and then r. d : Press 3 once. i : Press 4 three times.

Press % (SubMenu).

➡

Use j to select Phrase and then press

➡

c (OK).

➡

Use % (Category) to select Internet.

➡

Use j to select .co.jp and then press c (Select).

".co.jp" is entered.

Entering Pictograms

When a character entry screen is displayed, press R.

➡

Use a to select the pictogram you want to enter and then press c (Select).

You can enter pictograms consecutively if you press

•

& (Repeat) instead of c (Select).

Character Input

Address Book

Saving a Address Book Entry

When the standby screen is displayed, hold down & for at least one second.

➡

Use j to select c (Select).

➡

Enter a name and then press c (OK).

The [Reading] for the name is entered automatically.

➡

Use j to select [Phone No.1] and then

Address Book

press c (Select).

➡

Enter a phone number and then press c (OK).

If the phone number is for a fixed-line phone, enter the

• phone number starting with the area code.

Use j to select a phone number type and

➡

then press c (Select).

Follow the next step to enter an e-mail address. If

• you do not want to enter an e-mail address, press % (Reg).

Use j to select [E-mail Address1] and then

➡

press c (Select).

Enter an e-mail address and then press

➡

c (OK). Use j to select an e-mail address type and

➡

then press c (Select). Press % (Reg).

➡

[Name] and then press

The Address book can store up to 1,000 entries.

• The cell phone automatically saves an entry to the

• lowest available memory number from 000 to 999. You can save three phone numbers and three e-mail

• addresses for each Address book entry. You can also assign a group No., and enter birthday,

• address, and other information.

Dialing from the Address Book

When the standby screen is displayed, press &.

Use a to select the entry containing the

➡

phone number you want to dial and then press c (Detail).

Use j to select the phone number and then

➡

press c (Select). Use j to select Voice Call and then press

➡

c (OK).

Editing Address Book Entries

When the standby screen is displayed, press &.

Select an entry and press c (Detail).

➡

Press & (Edit).

➡

Edit the contents and then press % (Reg).

➡

Use j to select Overwrite and then press

➡

c (OK).

Saving a Phone Number from the Incoming or Outgoing History

Example: Saving a phone number from the incoming history

When the standby screen is displayed, press l and use j to select the phone number you want to save.

➡ ➡

➡

to the Address book

Press % (SubMenu). Use j to select Reg to Adrs Book and then

press c (OK). Use j to select Register New and then press

c (Select). Use j to select a phone number type and

then press c (Select).

For details on saving a Address book entry, see page

•

28.

Address Book

Pair Function

You can register a maximum of five pair partners you contact often to easily call or send mail.

Registering a Pair Partner

Making a Call to a Pair Partner

When the standby screen is displayed, press N.

Use s to select the person you want to call.

➡

Use j to select Call and then press c (Select).

➡

When the standby screen is displayed, press N.

Use s to select a blank screen and then

➡

press c (Select). Use j to select YES and then press c (OK).

➡

Use a to select a pair partner, press c (Detail)

➡

and then c (Select).

When registering a Address book entry with multiple

Pair Function

• phone numbers and e-mail addresses as pair partner, select the phone number and e-mail address to use with the Pair function.

When you delete a Address book entry registered

• in the pair partner, the Address book entry is also deleted from the Pair function.

Sending Mail to a Pair Partner

When the standby screen is displayed, press N.

➡

Use s to select the person you want to send mail.

➡

Use j to select E-mail or C-mail and then press c (Select).

To create an e-mail message, see "Creating and

• Sending E-mail Messages" on page 31. To create a C-mail message, see "Creating and Sending C-mail Messages" on page 34.

Mail

Using E-mail

To use e-mail, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, you need to configure initial settings. You can send and receive e-mail with other cell phones that support e-mail, and with PCs. In addition to text messages of up to 5,000 double-byte (or 10,000 singlebyte) characters, you can also send photos and movies by e-mail.

•

The packet communication charge for sending and receiving e-mail applies to the amount of data sent and received.

•

You can send an e-mail message to up to 30 different addresses at one time. You can send up to 1,000 e-mail messages per day (a

• message with multiple recipients is counted as more than one message). Sending and receiving e-mail messages that include

• attachment data may take a while.

Creating and Sending E-mail Messages

When the standby screen is displayed, press L.

Use j to select Create New and then press

➡

c (Select).

➡

Use j to select Address and then press c (Select) twice.

➡

Use j to select Address Book and then press c (Select).

➡

Use a to select a Address book entry and then press c (Detail).

➡

Use j to select an address and then press c (Select).

➡

Press & (OK).

➡

Use j to select Subject and then press c (Select).

➡

Enter a subject and then press c (OK).

You cannot enter single-byte katakana characters or a

• new line in a subject.

Use j to select Text and then press

➡

c (Select). Enter text and then press c (OK).

➡

You cannot enter single-byte katakana characters.

•

Press & ( Send).

➡

Mail

Reading Received E-mail Messages

When you receive an e-mail message, E-mail appears on the standby screen.

Use s to select E-mail and then press

➡

c (Select). Press c (Select).

➡

: Indicates a read message.

•

: Indicates an unread message.

Use j to select the new message and then

➡

press c (Select).

Reading an E-mail Message from the E-mail Menu

■

When the standby screen is displayed, press L to display the E-mail menu, use j to select Inbox and then press

Mail

c (Select). For subsequent operations, see "Reading Received E-mail Messages" above.

Reading an E-mail Message with an Attached Photo or Movie

Example: Viewing an attached photo

Display the e-mail message that has an attached photo (above).

Use j to select the file name and then press

➡

c (Select).

Use j to select the file name and then press

➡

c (Receive). Press c (Play).

➡

Selecting the file name or pressing (Receive)

• may be unnecessary for some files to be displayed, depending on the file size.

Replying to Received E-mail Messages

When the standby screen is displayed, press L.

Use j to select Inbox and then press

➡

c (Select). Press c (Select).

➡

Use j to select the message you want to

➡

reply to and then press c (Select). Press & (Reply).

➡

"Re:" is prefixed to the subject, and the text of the message is quoted.

➡

Refer to "Creating and Sending E-mail Messages" (page 31) for subsequent operations.

Rejecting Spam

Setting mail filters to reject spam is recommended. The

サポート設定

mail filters easily by answering questions that appear on the screen.

Setting Mail Filters

■

Example: Connecting to

When the standby screen is displayed, press L.

Use j to select E-mail Setup and then press

➡

c (Select). Use j to select Mail Filter and then press

➡

c (Select). Use j to select

➡

c (Select).

➡

Use j to select the input box and then press c (Input).

➡

Enter your security code and then press c (OK).

➡

Use j to select c (Select).

➡

Use j to select Settings) and then press c (Select).

(Supportive Settings) helps you to set

サポート設定

(Next) and then press

送信

(Send) and then press

サポート設定

(Supportive Settings)

(Supportive

カンタン設定 (Simple Settings)

■

Set the filter by answering

サポート設定

(Supportive Settings)

フィルターレベル（高）

Filter Level (High)

フィルターレベル（中）

Filter Level (Medium)

フィルターレベル（低）

Filter Level (Low)

You can also prevent spam by changing your e-mail

• address. For details on changing your e-mail address, see page 16.

questions

This is recommended for users who want to configure settings while confirming conditions.

Shut out all mail from PCs

This is recommended for users who only want to send mail to and receive mail from cell phones.

Block unsolicited advertisement, spoof e-mail and mail from specific addresses

This is recommended for users bothered by certain senders or spam mail.

Block unsolicited advertisement and spoof e-mail

This is the minimum level recommended for all users.

Mail

Using C-mail

C-mail is a service that uses phone numbers as addresses to exchange messages between au cell phones that support C-mail. A C-mail message can contain up to 50 double-byte (or 100 single-byte) characters.

The C-mail send charge applies when sending C-mail.

•

C-mail Safety Block

■

C-mail safety block is a function that allows you to reject C-mails that include URLs (http://△△△, https://△△△) or phone numbers in the C-mail message text. C-mail safety block is valid by default. Cancel the setting if you want to receive C-mails that include URLs and phone numbers in the message text.

Mail

Creating and Sending C-mail Messages

When the standby screen is displayed, hold down L for at least one second.

Use j to select Create New and then press

➡

c (Select). Enter text and then press c (OK).

➡

Use j to select

➡

c (Edit).

➡

Use j to select Quote Adrs Book and then press c (OK).

[Address] and then press

Use a to select a Address book entry and

➡

then press c (Detail). Use j to select a phone number and then

➡

press c (Select). Press & (Send).

➡

Reading Received C-mail Messages

When you receive a C-mail message, C-mail appears on the standby screen.

➡

Use s to select C-mail and then press c (Select).

➡

Press c (Select).

: Indicates a read message.

•

: Indicates an unread message.

Use j to select the new message and then

➡

press c (View).

Reading a C-mail Message from the C-mail Menu

■

When the standby screen is displayed, hold down L for at least one second to display the C-mail menu, use j to select Inbox and then press c (Select). For subsequent operations, see "Reading Received C-mail Messages" above.

Movie/Camera

Cell phone is equipped with a CMOS camera that enables approximately 5.00 million effective pixel shooting. HD movie shooting for Hi-Vision and movie/photo shooting can be used. "Macro" enables clear photo shooting and movie recording even when the object is close to the camera. You can send photos and movies by e-mail.

Using HD Movie

HD movie recording is a recording mode for Hi-vision.

•

HD movie recording can continue until its size reaches up to approximately 2GB. The maximum size varies depending on how much data space the cell phone has.

•

The speed class of the most highly recommended microSDHC memory card is Class 4 or above. A lowerperformance card may cause abnormal recording, or audio and visual failure during HD movie playback.

•

You cannot charge the battery during HD movie shooting using the USB Charge Cable 01 (sold separately) or the Common DC adapter 01 (sold separately). HD movie recording increases battery power

• consumption.

What You Can Do With HD Movie

■

You can select a recording mode as you like. You can resize an HD movie and send it by e-mail.

Recording

Mode

HQ(high qual.)

HM(mdl qual.) Up to approx. 45 min.*

HL(long time) Up to approx. 60 min.*

* The maximum time that you can continue to record a

HD movie using a commercially available microSD or microSDHC memory card (2 to 8GB). The total recording time using a microSDHC memory card (8GB): up to approximately 2 hours in HG (high qual.), up to 3 hours in HM (mdl qual.) or up to 4 hours in HL (long time). However, the recording time varies depending on the recording conditions or the capacity of the microSD memory card you are using. The recording time shortens if the battery charge is low.

Recording Size:

Width x Height

(dot)

1,280×720

Recording Time

Up to approx. 30 min.*

Movie/Camera

The Recording Time

■

The continuous recording time of HD movie is approximately 100 minutes when the battery is fully charged. * The value is one that the manufacturer obtained in the

following conditions. Note that the continuous recording time varies depending on the actual recording conditions or environment.

Using a new battery; at room temperature; strong signal

• ; display brightness "Level3"; photo light "OFF"; not

using zoom; focus fixed.

How to Shoot in the Movie Open

■

Position

Cell phone has the HD movie recording function that enables you to record a movie with a suitable size and quality for Hi-vision.

Movie/Camera

Movie Open Position

•

Hold the cell phone securely when shooting in the Movie Open Position.

Recording an HD Movie

When the standby screen is displayed, press x.

Press b / c.

➡

The recording screen is displayed.

➡

Recording aborts by pressing b / c, or when the maximum recording time press.

The preview screen is not displayed. An HD movie is saved to the microSD memory card or to the HD Folder in the Data Folder of the cell phone, and returns to the monitor screen.

HD movie is activated if you press

• activated by the following procedure: When the standby screen is displayed, press use

to select Camera, HD Movie and then press (Select). The camera function exits when you close the cell

• phone with the HD movie monitor screen displayed. Recording ends if you close the cell phone during

• recording. An incoming call, an alarm and some others interrupt

• recording. In that case, the data of an HD movie recorded before interruption will be saved to the Data Folder or the microSD memory card. If HD movie is on and

• it is recommended to exit the function immediately and charge the battery. Note that HD movie requires a large amount of power.

is displayed on the screen,

. Also, it is

The Folder that HD Movie Files are saved to

Recording

Mode

HD Movie

* When the microSD memory card is inserted, HD movie

files are automatically saved to the HD Folder in the Data Folder of the microSD memory card. However, they are automatically saved to the Data Folder of the cell phone if the microSD memory card does not have enough capacity left.

Using the 1Sec Quick Start mode

■

If you press x on the monitor screen of HD movie/movie, the mode changes into the 1Sec Quick Start mode, which interrupts the monitor screen for about 10 minutes. The monitor screen returns in about 1 second if the 1Sec Quick Start mode is on and you press x/C. When the cell phone is in the 1Sec Quick Start mode, the screen showing the mode is on is displayed. However, you can use another function if you press w.

Storage Folder

Data Folder of the Cell Phone

HD Folder

microSD Memory

Card

HD Folder in the microSD Data Folder

•

The cell phone does not operate in any of the following occasions, even if you press some other occasions where the cell phone does not operate.

- Key operation is invalid

- The cell phone is being updated

- Displayed is the screen where you enter your lock

No. to unlock a function

- Data is being transmitted

- During resetting

- During movie recording

- My Voice Memo is being recorded You cannot change the mode into the 1Sec Quick

• Start mode if you have activated HD movie/movie from another function. The 1Sec Quick Start mode is deactivated if it operates

• for about 10 minutes, or if you press 1-Second Quick Start indicator (LED) turns off and HD movie/movie exits.

•

Using the 1Sec Quick Start mode repeatedly shortens battery available time.

•

If the 1Sec Quick Start mode is on and you are using another function in the Multi Play Window, it takes several seconds before you press screen of HD movie/movie returns. The lock operates again if the 1Sec Quick Start mode

• is on, you unlock Auto Lock (M411) temporarily, and there is no operation within the setting time. Less battery power is consumed when the cell phone

• is in the 1Sec Quick Start mode than when the HD movie/movie monitor is on.

. Note that there are

. And then, the

and the monitor

Movie/Camera

•

When the cell phone is in the 1Sec Quick Start mode, the camera start indicator turns off and the 1-Second Quick Start indicator (LED) light turns on blue. The 1-Second Quick Start indicator (LED) blinks if you are using another function in the Multi Play Window.

Using Movie/Photo

What You Can Do With Movie

■

You can select the size of a movie by changing recording modes.

○：Attachable to an e-mail △：Attachable to an e-mail after the size is changed

Recording

Mode

QCIF 176×144

Movie/Camera

QVGA 320×240

VGA 640×480

* The maximum time that you can continue to record

a movie using a commercially available microSD or microSDHC memory card (512MB to 8GB). However, the recording time varies depending on the recording conditions or the capacity of the microSD memory card you are using. The recording time shortens if the battery charge is low.

Photo Size:

Width x

Height (dot)

Recording

Time

Up to 15 seconds

Up to approx. 120 minutes*

Up to approx. 90 minutes*

E-mail

Attachment

○

△

■

What You Can Do With Photo

You can select a size and quality as you like.

Photo Size:

Width x Height

(dot)

W.paper (Normal): 240×320

W.paper(FW): 480×854

0.3M:640×480

1M:1,280×960

2M: 1,600×1,200

3M: 2,048×1,536

4M(FW): 2,560×1,440

5M: 2,560×1,920

The quality "Fine" is for clear printout.

•

Quality

Only Normal

Fine 130KB 3,500

Normal 70KB 5,000

Fine 500KB 1,000

Normal 280KB 1,700

Fine 800KB 600

Normal 420KB 1,100

Fine 1,300KB 350

Normal 650KB 750

Fine 1,500KB 300

Normal 750KB 650

Fine 2,000KB 250

Normal 1,000KB 500

Capacity

(Approx.)

30KB 5,000

140KB 3,500

Maximum

Number

of Photos

(Approx.)

About Photo Modes

■

The following modes are available for taking photos. W.paper (Wide) is set for W.paper mode and 5M is set for DSC mode at the time of purchase.

Mode Photo Size Storage Location

W.paper Mode

DSC Mode

* When a microSD memory card (commercially available) is

not inserted, the files are saved to the Data Folder of the cell phone.

•

W.paper (Normal)

W.paper (FW)

0.3M

4M (FullWide)

Take care not to cover the lens and optical sensor with a strap or finger.

The Photo Folder in the Data Folder of the cell phone

The DSC Folder in the Data Folder of a microSD memory card*

Recording a Movie

When the standby screen is displayed, press c.

Use a to select Camera and then press

➡

c (Select).

➡

Use j to select Movie and then press c (Select).

The movie monitor screen is displayed.

•

Press b / c (Record).

➡

The recording screen is displayed.

•

Recording aborts by pressing b / c, or

➡

when the maximum recording time press.

If you record a movie in "QCIF" mode, the movie preview

• screen is displayed and you can do the following: You can check the movie before storing by the following procedure: press % (Sub-menu), use j to select Play, and then press c (OK).

If the recording mode is "QCIF"

c(Save)

➡

The file is saved to the Data Folder of the cell phone.

•

You can also activate movie by pressing . The

• mode is the same as the one you were using last. The recording stops when you close the cell phone

• during recording. An incoming call, an alarm and some others interrupts

• recording. In that case, the data of a movie recorded before interruption will be saved to the Data Folder or the microSD memory card, and also the preview screen is displayed if the recording mode is "QCIF".

Movie/Camera

The Folder that Movies are Saved to

•

Storage folders for movies are different according to recording mode.

Recording

Mode

QCIF

QVGA

VGA

* When you record a movie in "QVGA" or "VGA" mode

and the microSD memory card is inserted, the file is automatically saved to the Movie Folder in the Data Folder of the microSD memory card. However, it is automatically saved to the Data Folder of the cell phone if the microSD memory card does not have enough capacity left.

Storage Folder

Data Folder of the Cell Phone

Date Sub-folder in the Movie

Folder

microSD memory

Movie Folder in the microSD Data Folder

Movie/Camera

card

Photo Taking Tips

When taking photos, frame the subject within the display and hold the cell phone steady with both hands to avoid shaking.

Regular Open Position■

Camera lens

Camera start indicator

Photo light/

Photo light/ Pocket light

Pocket light

Camera start indicator

Taking a Photo

When the standby screen is displayed, press c.

Use a to select Camera and then press

➡

c (Select).

➡

Use j to select Photo (W.paper Mode) and then press c (Select).

➡

Press c (Shoot).

The preview screen is displayed.

Saving a Photo

■

Press c (Save) on the preview screen.

If you do not want to save the photo, press

• preview screen.

in the

Movie/Camera

EZweb

EZweb is an information service that allows you to enjoy browsing the Internet on your cell phone. You can also download Chaku-Uta-Full contents from web pages. To use EZweb, you need to apply for an EZweb subscription. If you did not apply for an EZweb subscription at the time of purchase, contact an au shop or the au Customer Service Center. Also, before use, you need to configure initial settings.

•

The packet communication charge for EZweb connection applies to the amount of data sent and received, not to the length of time connected.

•

In addition to communication charges, some sites charge for providing information.

, Chaku-Uta®, news, and other

EZweb

EZweb Subscription RequiredEZweb Subscription Required

Accessing Sites

Viewing the au one Top

■

You can access EZweb from the au one Top. A variety of useful and fun sites are available on EZweb. When the standby screen is displayed, press R, use j to select au one Top and then press c (Select).

au one Topau one Top

キーワード検索機能 (Search by Keyword)

Provides a search function for searching for information by keyword.

カテゴリ（メニューリスト） (Category (Menu List))

Provides a list of various content provider sites.

トップニュース (Top News)

Provides automatic updates of the latest news.

最新オススメ情報 (Latest News)

Introduces up-to-date information concerning entertainment, daily life, etc.

天気・乗換・占い・テレビ・銀行 (Weather, Transportation, Horoscope, TV & Bank)

Provides direct access to these au one services.

買う (Shopping & Auctions)

Provides a list of shopping and auction sites available from your cell phone.

知る (Tips & Tools)

Provides information on sports and stock prices, as well as useful tools such as maps and dictionaries.

楽しむ (Hobbies & Culture)

Provides the latest information, such as games, music, books, hobbies and entertainment.

暮らす (Lifestyle)

Provides travel, restaurant and other lifestyle-oriented information.

集まる (Community)

Provides interesting and useful information that you can use for SNS or blogs.

メール (Mail)

Provides an extra e-mail address that can be used on your PC.

マイページ (My Page)

Provides useful information and tools tailored to your cell phone usage and a large data storage area.

austyle

Introduces information and sites that au recommends.

とくする情報 (Valuable Information)

Presents gifts and push information to the EZweb subscriber for free.

auお客さまサポート (au Customer Support)

Provides information about charges, various applications, au online manual and notices from au.

auワンちゃんの部屋 (au Doggy’s Room)

Introduces au Doggy.

カンタンアクセス・オープンサイト (Simple Access & Open Site)

Provides easy access and introduces open sites.

災害用伝言板 (Disaster Message Board)

ENGLISH

Introduces English sites.

EZweb

Basic Operations

■

Use j to select the site you want to access and then press c (OK). Press L or C to return to the previous screen. Hold down either key for at least one second to return to the au one Top.

The following describes the basic operations that are available while accessing sites.

EZweb

Key

Operation

L、C

Exits EZweb.

Moves the cursor up and down. When there is data available above or below the current screen, scrolls up and down the screen one line at a time.

When there is data available above or below the current screen, scrolls the screen page by page.

l：Scrolls one page up. r：Scrolls one page down.

Returns to the previous screen.

Description

Bookmarking Frequently Accessed Pages

When the page you want to bookmark is displayed, press % (BrowserMenu).

Use j to select New bookmark and then press

➡

c (OK).

Some pages cannot be bookmarked.

•

Press % (Reg).

➡

The displayed page is bookmarked, and its title and URL are added to the Bookmark.

The Bookmark can contain up to 100 titles and URLs.

•

Viewing Bookmarked Pages

When the standby screen is displayed, press R and then use s to select EZweb.

Use j to select Bookmark(s) and then press

➡

c (Select). Use j to select the bookmark for the page

➡

you want to view and then press c (Connect).

The cell phone connects to the site.

Checking Charges

When the standby screen is displayed, press c.

Use a to select Function and then press

➡

c (Select).

➡

Use j to select Time/Toll/Sub and then press c (Select).

➡

Use j to select Inquire Toll and then press c (Select).

➡

Use j to select YES and then press c (OK).

Select the item you want to check and then follow the

• on-screen instructions.

Downloading Chaku-Uta-Full®/ Chaku-Uta

When the standby screen is displayed, press R and then use s to select EZweb.

Use j to select au one Top and then press

➡

c (Select). Use j to select

➡

(Category (Menu List)) and then press c (OK).

➡

Use j to select (Chaku-Uta-Full (Chaku-Uta

カテゴリ（メニューリスト）

着うたフル・ビデオクリップ

･Video Clip) or

) and then press c (Select).

着うた

Use j to select the site you want to access

➡

and then press c (Select).

The download instructions appear.

Fee-based information sites require entry of EZ

• password or Premium EZ password. Follow the onscreen instructions to enter either password. See page 17 for details.

Follow the on-screen instructions.

➡

Download is completed.

Downloaded data is saved automatically to the Data Folder.

•

Press & (Play).

➡

The downloaded Chaku-Uta-Full® or Chaku-Uta® plays.

•

This procedure is only an example for the purpose of explanation and may differ from actual procedures. Follow the instructions on the site from which you want to download the data.

EZweb

EZ News Flash/au one Gadget

Use the EZ News Flash/au one Gadget to display flash news, or activate the set gadget on the standby screen. You can check the news details and other information by selecting the ticker field.

EZ News Flash/au one Gadget

You can use the EZ News Flash and au one Gadget by making a few simple settings following the EZweb initial setup.

Basic Operations

Select the ticker field.

Check the news.

Select the info pane.

Press u on

Press u on the standby

the standby screen.

screen.

•

The EZ News Flash information is automatically received at no charge. Note, however, that packet communication charges may be incurred for manual updates and connecting to EZweb sites. In this case, a confirmation screen for network connection is displayed.

Select the info pane.

Select the gadget

Select the gadget setting icon.

setting icon.

Check the

Check the weather forecast.

weather forecast.

Set

Set au one Gadget.

au one Gadget.

EZweb Subscription RequiredEZweb Subscription Required

•

Packet communication charges are incurred for using au one Gadget applications that require network connection for information updates. The EZ News Flash information is updated at regular

• time intervals.

appears while receiving information.

Setting EZ News Flash

The EZ News Flash is available free of charge. You have only to make a few simple settings. After following the procedure in “Initial Setup of E-mail and EZweb” on page 11, configure EZ News Flash settings. If you did not configure the EZ News Flash settings at the time of the initial setup, follow the steps below.

When the standby screen is displayed, select the ticker field and then press c (OK).

Follow the on-screen instructions.

➡

The setup procedure is completed.

When the standby screen returns, a message asking

• you to wait for a while until the next update takes place appears in the ticker field.

Canceling EZ News Flash

■

When the standby screen is displayed, select the ticker field and then press c (News).

Press % (メニュー[Menu]), use j to select

➡

サービス設定解除

(Service Cancellation) and

then press c (選択[Select]).

Follow the on-screen instructions.

➡

Changing the Reception Settings for

■

EZ News Flash Information

You can change the ring tone, vibrator and LED settings under M216 NewsFlash Receive for reception of EZ News Flash information. If you do not want the ring tone to sound when receiving EZ News Flash information, set the volume to OFF.

You can configure the au one Gadget settings from the

• gadget setting icon on the standby screen.

EZ News Flash/au one Gadget

EZ Navi

Using GPS (Global Positioning System), EZ Navi provides useful positional information services.

EZweb Subscription RequiredEZweb Subscription Required

When the standby screen is displayed, press R and then use s to select the EZnavi.

•

The packet communication charges for using EZ Navi services apply to the amount of data sent and received. Some services may require a separate information fee. Before using EZ Navi, you must configure initial

• settings of EZweb (page 11).

Passenger Seat Navi for People in the Passenger Seat to Check the Route

Passenger Seat Navi guides the passengers to the

EZ Navi

destination with the best route using voice and map.

Drivers are not allowed to use Passenger Seat Navi.

Security Navi to Check Where Your Kids Are

The Security Navi application is made up of the following three functions:

いつでも位置確認 (Auto Position Search [monthly charge]), エリア通知 (Area Message [no monthly charge]), 位置確認メール (Position Search Mail [no monthly charge])

Using these functions, you can check the position of an au cell phone that supports Security Navi; and automatically send a notification to the specified au cell phones when you enter (or are in) or leave (or are no longer in) the set area within a predetermined period of time.

EZ Navi Walk for When You Go Out

フルモード(Full mode)

■

Function Explanation

トータルナビ／地図

(Total Navigation/Map)

乗換／時刻表(Connection/Timetable) お店／施設／イベント

(Shop/Facility/Event)

ドライブ／渋滞情報

(Road/Traffic Information)

オススメ便利メニュー

(Useful Menu) 設定／会員登録／インフォ(Setting/

Membership Registration/Information)

■

シンプルモード(Simple mode)

Function Explanation

ナビをする(Navigation)

現在地の地図

(Map of Your Current Location)

乗換案内(Connection Information) 渋滞／交通情報

(Traffic/Transit Information)

会員登録・インフォ

(Membership Registration/Information) フルモードとは(About Full Mode)

Navigate optimum route from various transportation means such as train/aircraft/bus/taxi. See current position and map of wherever you like.

Search for train connections, timetables and railway information.

Search for shops, facilities and event information.

See road and traffic information nationwide in real time.

Provides PC cooperative service and functions enabling you to enjoy EZ Navi Walk more.

Configure settings/membership registration/campaign information.

Navigate optimum route from various transportation means such as train/aircraft/bus/taxi.

See map around of your current location.

Confirm train connections from the departure to the arrival station.

See road and traffic information nationwide in real time.

Configure settings/membership registration/campaign information.

Introduces functions available in Full mode.

EZ Navi

3D Navi

■

Shows a 3D view at guidance points and around the destination area.

EZ Navi

Evacuate Navi to Guide You Home or to Nearby Evacuation Areas during Disasters

Nearby public evacuation areas or the direction to your home can be determined using the map data pre-installed on the cell phone ( Other useful contents can be downloaded from the

ナビ

(Evacuate Navi) section of the EZweb site.

•

Some contents require a monthly charge.

•

Use the information on the screen as a reference and always follow the instructions of police, fire and other municipal authorities.

•

When using Evacuate Navi, checking your current position may take more time than usual depending on the status of the GPS satellites.

避難所マップ

[Evacuate Area Map] ).

災害時

TV (1Seg)

"1Seg", a mobile terrestrial digital television service in Japan, is available on the cell phone.

Using the TV Antenna

■

When watching TV (1Seg), fully extend the TV antenna to ensure good reception.

EZweb Subscription RequiredEZweb Subscription Required

212

Before using TV, you must configure initial settings of

• EZweb (page 11). If you are watching TV indoors, you may be able to

• improve the reception by moving closer to a window.

follows. The figures vary according to the usage of data broadcasts.

DBEX ON: Using earphones

Continuous viewing time

Using the speaker

For information about the "1Seg" service, refer to the

• following homepage.

The Association for Promotion of Digital Broadcasting

From a PC http://www.dpa.or.jp/

From a cell phone http://www.dpa.or.jp/1seg/k/

Approx. 3 hrs 10 min. DBEX OFF: Approx. 3 hrs 20 min.

DBEX ON: Approx. 3 hrs 10 min. DBEX OFF: Approx. 3 hrs 20 min.

The continuous viewing times of TV (1Seg) are as

•

TV (1Seg)

Initial Setup of au Media Tuner

To watch TV (1Seg) using the au Media Tuner, you need to configure initial settings.

When the standby screen is displayed, hold down f for at least one second.

Disclaimer notes are displayed.

Use j to check the disclaimer notes, use j

➡

to select OK, and then press c (選択 [Select]).

The initial setting screen for using the au Media Tuner is displayed.

Follow the on-screen instructions to configure each

• setting. Then, the screen for setting TV (1Seg) channels appears.

Use j to select

➡

(Broadcasting wave)) and then press c (選択 [Select]).

TV (1Seg)

Automatic channel scanning begins. When receivable channels are found, the channel setup is completed.

•

Select

マニュアル設定

manually.

オート設定（放送波）

(Manual) to set the channel

(Auto

Watching TV (1Seg)

When the standby screen is displayed, hold down f for at least one second.

To Change Channels

■

Use s/LR to change channels. You can select TV (1Seg) and EZ Channel-Plus/EZ Channel programs.

TV (1Seg)

Change channels one by one.

1ch 2ch

EZ Channel-Plus/EZ Channel

Program 16 Program 2 Program 1

Before using this feature, you must configure au Media

• Tuner initial settings (see the procedure on the left). Channels cannot be changed with

• operation screen is displayed.

…

12ch

…

when the data

Basic Operations

Launch TV (1Seg) to start receiving data broadcasts. The data operation screen appears when a data broadcast is received. Press & (Vol/Ch) on the data operation screen to switch to the TV operation screen. On the TV operation screen, pressing N switches the display.

Data operation screen

(Vol/Ch)

TV operation screen

When the Wide open menu is displayed, use j to select TV (1Seg) and then press c.

Use p to adjust the volume.

➡

Wide Open Start

■

When Wide Open Start is set to TV (1Seg), you can start Television (1Seg) just by opening your cell phone in Wide open position when the standby screen is displayed.

When the standby screen is displayed, open your cell phone in Wide open position.

Television (1Seg) starts.

(戻る[Return])

On the TV operation screen, use

• volume.

to adjust the

Viewing in Wide Open Position

After making initial settings for au Media Tuner, you can enjoy it in Wide open position. Refer to "Position of Mobile HiVision CAM Wooo" (page 8) and set your cell phone in Wide open position before moving to the next step.

Exiting the au Media Tuner

Press F, use j to select はい (YES) and then press c (OK).

TV (1Seg)

In Case of Loss of Your Mobile Hi-Vision CAM Wooo

The Remote Ctrl Lock allows you to remotely activate the Auto Lock, FeliCa Lock, and Address Book Lock, preventing others from using your cell phone.

In Case of Loss of Your Mobile Hi-Vision CAM Wooo

Setting Conditions for Activating the Remote Ctrl Lock

You can activate the Remote Ctrl Lock by calling your cell phone a set number of times from a registered phone number within a specified period of time.

When the standby screen is displayed, press c.

➡

Use a to select Function and then press c (Select).

➡

Use j to select Privacy/Rstr and then press c (Select).

➡

Use j to select Security Lock and then press c (Select).

➡

Use j to select Rem. Ctrl Lock and then press c (Select).

➡

Enter Lock No., and then press c (OK).

➡

Use j to select Valid No. and then press c (Select).

➡

Use j to select [Register New] and then press c (Select).

Use j to select Direct Input, press c (OK),

➡

enter a phone number, and then press c (OK). Press % (Comp).

➡

Use j to select Duration (min) and then press

➡

c (Select). Enter a time and then press c (Set).

➡

This sets the time limit for receiving the set number of

• calls after the first call is received. You can set a time from one to ten minutes.

•

Use j to select No. of Incm, and then press

➡

c (Select).

Enter a number of calls, and then press

➡

c (Set).

This sets the number of calls to receive to activate the

• Remote Ctrl Lock. You can set a number of calls from three to ten.

•

Press % (Save).

➡

Use j to select YES and then press c (OK).

➡

Remotely Activating the Remote Ctrl Lock on Your cell phone

Call the cell phone from the registered phone number repeatedly within the set time limit.

When the specified number of calls are received, the

• Remote Ctrl Lock is activated and a message plays telling you that the cell phone is locked.

Activating the Remote Ctrl Lock by the Security Lock Service

Even if the Remote Ctrl Lock is not set in advance, the Remote Ctrl Lock can be activated by calling au Customer Service Center or completing the application process on au Customer Support from a PC. The Security Lock Service is available free of charge.

Calling au Customer Service Center for

■

Activating/Canceling the Remote Ctrl Lock

From an au cell phone: 113 without a prefix (toll free) From any other cell phone or fixed-line phone:

0077-7-113 (toll free)

Open 24 hours

Follow the voice guidance to complete the application process.

Activating/Canceling the Remote Ctrl

■

Lock from a PC

Login to au Customer Support (https://cs.kddi.com/) and complete the application process by following the onscreen instructions.

The Remote Ctrl Lock cannot be activated when the

• cell phone is turned off or out of the service area, or Emission OFF is set to ON.

•

You must fill out an application to use au Customer Support (the application can be filled out even after your cell phone is lost).

In Case of Loss of Your Mobile Hi-Vision CAM Wooo

Troubleshooting

Symptom Possible Cause Remedy Page

Cannot turn on power.

Cannot make calls.

Troubleshooting

Cannot receive calls.

No response when a key is pressed.

A warning tone sounds and power turns off.

Calls are answered automatically.

●Is the battery pack charged?

●Did you hold down F for at least a

few seconds?

●Is power turned on? Hold down F for at least a few seconds.

(out of range indicator) displayed?

●Is

●Is your hand or a metal object covering

the area around the built-in antenna?

● Did you enter the phone number starting

with the area code?

●Is (out of range indicator) displayed?

●Is power turned on? Hold down F for at least a few seconds.

●Is there enough power left in the battery

pack?

●Is Answer memo turned on?

Charge the battery pack. 9

Hold down F for at least a few seconds.

Move to a location where indicator) is no longer displayed, and try again. Also check the Area Setting.

Make sure your hand or any other metal object is not covering the area around the built-in antenna.

When making a call to a phone other than a cell phone, you need to enter the area code even if you are inside the same area.

Move to a location where indicator) is no longer displayed.Also check the Area Setting.

Charge the battery pack. 9

Hold down C for at least one second to turn off Answer memo.

(out of range

11,23

Symptom Possible Cause Remedy Page

Cannot hear the other party.

When making a call, a beeping sound is heard from the earpiece and a connection cannot be established.

The LED display flashes but the ring tone does not play.

Cannot charge the battery pack.

When the camera is activated, no subject is displayed.

•

For more detailed information, visit the following au troubleshooting sites:

- From an au cell phone: R ⇒ au one Top ⇒

オンラインマニュアル

- From a PC: http://www.kddi.com/customer/service/au/trouble/kosho/index.html

●Is the earpiece volume too low?

●Is

●Is the wireless line busy or is the phone

●Is manner mode turned on?

●Is

●Are the plug and connector of the AC

●Is the battery pack installed correctly?

●Is a finger or other object covering the

(out of range indicator) displayed? Or are you in a location where the signal is too weak?

you are calling on another line?

(ring tone off indicator) displayed?

adapter inserted properly?

camera lens?

auお客さまサポート

(Online Manual) ⇒

故障診断Q&A

(Troubleshooting FAQ)

Press u during a call to increase the earpiece volume.

Move to a location where indicator) is no longer displayed.Also check the Area Setting.

End the call and try again later. 18

Hold down ( for at least one second to turn off manner mode.

Increase the volume of the incoming call ring tone.

Insert the plug and connector firmly.

Install the battery pack properly.

Check the position of the camera lens and remove the obstacle.

(au Customer Support) ⇒

(out of range

Troubleshooting

Index

Numeric

1Sec Quick Start mode …………………………………… 37 1Seg ………………………………………………………… 51

Accessories …………………………………………………… 6 Address book ……………………………………………… 28

Dialing……………………………………………………… 28 Editing……………………………………………………… 28 Saving……………………………………………………… 28 Saving a phone number from the incoming or outgoing history

Answer memo ……………………………………………… 21

Playback…………………………………………………… 21 Turning off ………………………………………………… 21 Turning on ………………………………………………… 21

au one Gadget……………………………………………… 46

Gadget setting icon ……………………………………… 46

Battery level ………………………………………………… 12 Battery pack………………………………………………… 6,9 Battery pack/cover …………………………………………… 7

Index

Camera……………………………………………………… 35

Photo taking tips ………………………………………… 40 Taking a photo …………………………………………… 41

… 29

Cell phone etiquette…………………………………………… 2 Character input……………………………………………… 25

Character entry modes…………………………………… 25 Deleting characters ……………………………………… 26 Entering characters from the same key………………… 26 Starting a new line………………………………………… 26

Charging the battery pack …………………………………… 9 Checking charges…………………………………………… 45 C-mail………………………………………………………… 34

C-mail safety block ……………………………………… 34 Creating and sending …………………………………… 34 Reading …………………………………………………… 34 Received mail …………………………………………… 34

Contents………………………………………………………… 4

Disaster Message Board Service…………………………… 3 Display …………………………………………………… 7,12 Domain ……………………………………………………… 16 Downloading Chaku-Uta Downloading Chaku-Uta-Full

 ………………………………… 45

 …………………………… 45

Earpiece volume …………………………………………… 20 E-mail………………………………………………………… 31

Creating and sending …………………………………… 31 Initial settings……………………………………………… 11 Reading received mail…………………………………… 32 Replying…………………………………………………… 32 Viewing attached images………………………………… 32

E-mail address……………………………………………… 11

Available characters……………………………………… 25 Changing ………………………………………………… 16 Entering …………………………………………………… 26

Entering pictograms………………………………………… 27 Evacuate Navi ……………………………………………… 50 EZ Navi……………………………………………………… 48 EZ Navi Walk………………………………………………… 49 EZ News Flash……………………………………………… 46

Canceling ………………………………………………… 47 Changing the Reception Settings ……………………… 47 Info pane…………………………………………………… 46 Setting……………………………………………………… 46 Ticker field………………………………………………… 46

EZ password………………………………………………… 17 EZweb ……………………………………………………… 42

Accessing sites…………………………………………… 43 au one Top………………………………………………… 43 Basic operations ………………………………………… 44 Initial settings……………………………………………… 11

Incoming history …………………………………………… 19 Indicators …………………………………………………… 12 Initial settings …………………………………………… 11,52

au Media Tuner…………………………………………… 52 E-mail・EZweb…………………………………………… 11 TV (1Seg) ………………………………………………… 52

International Call …………………………………………… 18 Internet ……………………………………………………… 42

Sites……………………………………………………… 43,44

Key assignments…………………………………………… 10

Language …………………………………………………… 11 Learning the basics………………………………………… 10 Lock No.……………………………………………………… 17

Global Functions …………………………………………… 23

Calling Japan from Overseas…………………………… 24 Obtaining the Latest PRL (Preferred Roaming List)…23 Setting Area ……………………………………………… 23

HD Movie

Recording ………………………………………………… 36 Recording mode ………………………………………… 35

Mail…………………………………………………………… 31

C-mail……………………………………………………… 34 E-mail ……………………………………………………… 31

Mail filters …………………………………………………… 33

Simple settings …………………………………………… 33

Main menu…………………………………………………… 13 Manner mode ……………………………………………… 20 Movie

Recording ………………………………………………… 39 Recording mode ………………………………………… 38

Index

Names of parts………………………………………………… 7 Notification window………………………………………… 11

One-ring calls ……………………………………………… 19 Outgoing history …………………………………………… 19

Pair Function………………………………………………… 30

Making a call to a pair partner ………………………… 30 Registering a pair partner ……………………………… 30 Sending mail to a pair partner…………………………… 30

Passenger Seat Navi ……………………………………… 48 Passwords…………………………………………………… 17 Phone (call) ………………………………………………… 18

184/186 …………………………………………………… 18 Answering ………………………………………………… 19 International Call ………………………………………… 18 Making……………………………………………………… 18 Returning ………………………………………………… 19

Phone number……………………………………………… 11 Photos ……………………………………………………… 40

Photo modes……………………………………………… 39 Taking……………………………………………………… 41

Index

Playback

Answer memo …………………………………………… 21

Position of Mobile Hi-Vision CAM Wooo …………………… 8 Premium EZ password …………………………………… 17

Remote Ctrl Lock…………………………………………… 54 Ring tones

Changing the type………………………………………… 20 Changing the volume …………………………………… 21

Security code ……………………………………………… 17 Security Lock Service……………………………………… 55 Security Navi………………………………………………… 48 Signal strength……………………………………………… 12 Simple menu………………………………………………… 14 Sites ………………………………………………………… 43

Bookmarking……………………………………………… 44 Viewing from bookmarks………………………………… 44

Spam………………………………………………………… 33

Troubleshooting …………………………………………… 56 Turning on/off power ……………………………………… 11 TV (1Seg)…………………………………………………… 51

Antenna …………………………………………………… 51 Basic operations ………………………………………… 53 Changing channels ……………………………………… 52 Exiting……………………………………………………… 53 Initial settings……………………………………………… 52

Wide open menu…………………………………………… 15

Forinquiries,call:auC ustome rServi ceCente r

Forgeneralinformationandcharges(tollfre e)

Fromﬁxed-linephones:

PRESSINGZE ROWILLCONNEC TYOUTOANOPERATOR

AFTERCALLING157ONYOURauCELLPHONE

Forloss,theftordamageandoperationinformation

(tollfr ee)

Fromﬁxed-linephones:

FromEZweb:

AccessMethod

Fromaucellphones:

areacoden otrequire d

Fromaucellphones:

areacoden otrequire d

EZ▶auoneTop▶auお客さまサポート

(Inquiries)

▶お問い合わせ ・Menusaresubjecttochangewithoutpriornotice.

(auCustomerSupport)

Cellphonea ndPHSoperato rscollectandr ecycleunuse d telephon es,batteriesa ndbatteryc hargersatsto res bearingthel ogoregardle ssofbrandandma nufacture r toprotecttheenvironmentandreusevaluableresources.

なるほど!au

みんなでつくる、auQ&Aサイト

AccessMethod

Readthiscodeforaneasy accesstoみんなでQ&A｢なるほど!au｣(auUsersForum). ・Thepacketcommunication

chargeapplies.

EZ▶auoneTop▶auお客さまサポート ▶みんなでQ&A｢なるほど!au｣

(auCustomerSupport)

(auUsersForum)

▶

Readthiscodefor aneasyaccessto auOnlineManual.

BMN6490YAA-1 July20 09,1stEditi on

Sales:KD DICORP ORATION  OKIN AWACELLULA RTELEPHO NECOMPANY Manufacturedby:HitachiConsumerElectronicsCo.,Ltd.

•

KDDI HI-VISION CAM WOOO User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

Illustrations and Screenshots in This Manual

Notes on Cell Phone Use

Cell Phone Etiquette

Do Not Use the Cell Phone While Driving!

Disaster Message Board Service

Contents

Getting Ready

Checking the Contents of the Box

Names of Parts

Position of Mobile Hi-Vision CAM Wooo

Charging the Battery Pack

Learning the Basics

Turning On Power

Switching the Display Language to English

Initial Setup of E-mail and EZweb

Checking Your Phone Number and E-mail Address

Display Indicators

Using Main Menu

Using Wide Open Menu

Changing Your E-mail Address

Security Code and Passwords

Making and Answering Calls

Making a Call

Making an International Call

Answering a Call

Returning a Call (Outgoing History/ Incoming History)

One-ring Calls

Changing the Incoming Ring Tone

Adjusting the Earpiece Volume during a Call

Turning On Manner Mode

Adjusting the Incoming Ring Tone Volume

Turning On the Answer Memo

Global Function

Setting Area

Obtaining the Latest PRL (Preferred Roaming List)

Calling Japan from Overseas

Character Input

Character Entry Modes

Entering Alphanumeric Characters

Entering E-mail Addresses

Entering Pictograms

Address Book

Saving a Address Book Entry

Dialing from the Address Book

Editing Address Book Entries

Saving a Phone Number from the Incoming or Outgoing History

Pair Function

Registering a Pair Partner

Making a Call to a Pair Partner

Sending Mail to a Pair Partner

Mail

Using E-mail

Creating and Sending E-mail Messages

Reading Received E-mail Messages

Reading an E-mail Message with an Attached Photo or Movie

Replying to Received E-mail Messages

Rejecting Spam

Using C-mail

Creating and Sending C-mail Messages

Reading Received C-mail Messages

Movie/Camera

Using HD Movie

Recording an HD Movie

Using Movie/Photo

Recording a Movie

Photo Taking Tips

Taking a Photo

EZweb

Accessing Sites

Bookmarking Frequently Accessed Pages

Viewing Bookmarked Pages

Checking Charges

EZ News Flash/au one Gadget

Basic Operations

Setting EZ News Flash