KCodes 502g User Manual

KCodes 502g

2 USB 2.0 Hi-Speed-Port

Wireless Multifunction Router

User’s Manual

Version 1.0

Table of Contents

CHAPTER 1 INTRODUCTION.....................................................................................................3

1.1 HARDWARE SPECIFICATION..........................................................................................................3

1.2 FEATURES.....................................................................................................................................3

CHAPTER 2 PRODUCT OVERVIEW .........................................................................................4

2.1 PACKAGE CONTENTS....................................................................................................................4

2.2 HARDWARE DESCRIPTION ............................................................................................................4

2.2.1 Rear Panel..........................................................................................................................4

2.2.2 Front Panel.........................................................................................................................4

2.2.3 LED Indicators..................................................................................................................4

2.3 TYPICAL USAGE............................................................................................................................5

CHAPTER 3 INSTALLATION.......................................................................................................6

3.1 HARDWARE CONNECTIONS ..........................................................................................................6

3.2 IP SETTING ON WINDOWS ............................................................................................................6

CHAPTER 4 SETTINGS .............................................................................................................15

4.1 QUICK SETUP..............................................................................................................................15

4.1.1 ADSL Dialup (PPPoE)....................................................................................................15

4.1.2 Static IP.............................................................................................................................16

4.1.3 Automatic IP ....................................................................................................................17

4.1.4 Cable Modem (DHCP)....................................................................................................18

4.2 IP CONFIGURATION.....................................................................................................................19

4.2.1 IP Setup............................................................................................................................. 19

4.2.2 DHCP Server....................................................................................................................23

4.2.3 Routing Table..................................................................................................................24

4.3 NAT SETUP.................................................................................................................................26

4.3.1 Port Trigger......................................................................................................................27

4.3.2 Virtual Server...................................................................................................................28

4.3.3 Virtual DMZ......................................................................................................................30

4.4 FIREWALL SETUP........................................................................................................................30

4.4.1 IP Filter..............................................................................................................................31

4.4.2 MAC Filter.........................................................................................................................32

4.5 USB APPLICATION......................................................................................................................34

4.5.1 FTP Server........................................................................................................................34

4.5.2 Print Server......................................................................................................................37

4.6 SYSTEM SETUP...........................................................................................................................46

4.6.1 User Setting.....................................................................................................................46

4.6.2 Time Setup.......................................................................................................................47

4.6.3 Firmware Upgrade..........................................................................................................48

4.6.4 Setting Backup ...............................................................................................................49

4.6.5 Restore Default...............................................................................................................50

4.6.6 Wake on LAN...................................................................................................................50

4.7 STATUS & LOG............................................................................................................................51

4.7.1 Status................................................................................................................................51

4.7.2 DHCP Leases...................................................................................................................53

4.7.3 System Log......................................................................................................................54

4.8 LOGOUT.......................................................................................................................................56

APPENDIX FACTORY DEFAULT VALUES...........................................................................57

2

Chapter 1 Introduction

1.1 Hardware Specification

KCodes 502g is a wireless multifunction router. Besides the basic
functions of router , KCodes 502g has two additional USB host port s
to support FTP file server and print server. The following list shows
the hardware specification for KCodes 502g.

z WAN Port x 1
z LAN Port x 4
z 802.11 b/g Wireless Module
z USB 2.0 Host Port x 2
z LED x 9
z Init Button (factory default and firmware upgrade)
z Power Adaptor Connector (DC 12V/1A)

1.2 Features

KCodes 502g supports the following features:

z IP sharing
z WAN type : static ADSL, PPPoE, automatic IP, cable modem
z Print server (LPR)
z File server (FTP)
z Supports USB storage (USB hard drives, flash disks, memory

sticks)

z FAT 16/32 file systems
z DDNS
z NAT (Network Address Translation): port trigger, virtual server,

virtual DMZ

z Firewall: IP filter, MAC address filter, URL filter
z Easy to upgrade new version of firmware by using Web UI
z Web-based interface configuration and management: OS

independent, easy-to-use

3

Chapter 2 Product Overview

2.1 Package Contents

z KCodes 502g
z Power adaptor
z CD
z Quick Installation Guide

2.2 Hardware Description

2.2.1 Rear Panel

The rear panel includes a Power Inlet, a Init Button, four LAN Ports
and one WAN Port.

Power Inlet: use DC IN 12V/1A adaptor.
Init Button: reset the parameters to the factory default values.
LAN Port: for twisted pair category 5 cable. The 4 LAN ports are for

the connection to internal PCs.
WAN Port: for twisted pair category 5 cable. The WAN port is for
the connection to ADSL modem.

2.2.2 Front Panel

The front panel includes two USB Host Ports and nine LED
Indicators.

USB Host Port: USB 1.1/2.0 low, full, and Hi-Speed compliant

2.2.3 LED Indicators

Indicators Behavior Description

On Power On Power
Off Power off/System error

On Network (WAN) connected Link
Off No physical connection to network

(WAN)

Blinking Activity on network (WAN) Status
Off No activity on network (WAN)

LAN1 On Network Connected (LAN1)

4

USB1

USB2

Off No physical connection to network

(LAN1)

On Network Connected (LAN2) LAN2
Off No physical connection to network

(LAN2)

On Network Connected (LAN3) LAN3
Off No physical connection to network

(LAN3)

On Network Connected (LAN4) LAN4
Off No physical connection to network

(LAN4)
On USB device connected (USB1)
Blinking Connected USB device not

supported (USB1)
Off No physical connection to USB

device (USB1)
On USB device connected (USB2)
Blinking Connected USB device not

supported (USB2)
Off No physical connection to USB

device (USB2)

2.3 Typical Usage

The following diagram shows a typical usage and connection of the
Router and computers. All PCs connected to LAN ports can access
the Internet via ISP’s ADSL or cable modem connected to WAN
port.

ISP’s ADSL or Cable Modem

Router

WAN

LAN1

LAN2

LAN3

LAN4

Switch/HUB

PC3

PC4

PC1

PC2

PC5

5

Chapter 3 Installation

3.1 Hardware Connections

Make sure that your USB devices are powered off and that the
Router’s Power Adapter is disconnected.

Connect your PC to one of the Router’s LAN port with a twisted-pair
category 5 cable, 10baseT or 100baseTX.

Connect the Router’s WAN port to an ADSL modem with a
twisted-pair category 5 cable, 10baseT or 100baseTX.

Connect the Power Adapter to the Router. The power indicator will
light up and USB1 and USB2 indicators will flash in turn. When
USB1 and USB2 indicators stop flashing, the Router starts to work
normally. At this time, the Link indicator must light up.

3.2 IP Setting on Windows

Go to desktop and click Start Æ Control Panel.

6

At control panel, double click Network Connections.

All your connections will be displayed on the window. Go to Local

Area Connection and click mouse right button. A menu will appear,

select Properties.

7

At Local Area Connection Properties window, select the General
tab. Select Internet Protocol (TCP/IP) and then click Properties.

If you use DHCP to get IP automatically, select Obtain an IP

address automatically and then click OK to finish the setting. The

router supports DHCP, therefore any PC connected to LAN port of

8