KC HiLiTES KC 9560A, KC 9560C Instructions

Wiring Instructions for the

KC 9560/9560B 12v or KC 9560A/9560C 24v HID Harness

1. Unplug any power wires that you currently have connected to your existing ballasts. If you do not have any power wires
connected, just plug in the wires coming from the relay on your new harness.

2. Attach the black wire on the relay to chassis ground.

3. Attach the yellow wire to a 12/24V power source (depending on the voltage of your vehicle).

4. Attach the white wire as indicated in drawing.

5. Attach the brown wire to chassis ground.

SWITCH

Light

t

C

s

K

alla

B

Lights and ballast shown above
are not included with this harness.

Light

t

C

s

K

a

ll

a

B

Plug wires from relay

into 1 or 2 KC ballasts.

Chassis
Ground

Earth Supply

Brown wire

87

87

Chassis
Ground

Load

85

86

White wire

Green wire

30

Black wire

RELAY

Yellow wire

3 Amp

Fuse

20 Amp if 12v
10 Amp if 24v

Fuse

12 volt DC
Hi Beam
Low Beam
or Ignition

9 - 32 VDC

Power Source

KC HiLiTES, Inc., Post Office Box 155, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com 3265V - rev 071610