Installation Instructions for
Front Light Bar KC 7453 & 7454
2007 Toyota FJ
Thanks for choosing a KC HiLiTES product. We take pride in building the highest
quality, best engineered systems possible. Your satisfaction with our product is
important, so if you have any questions, please call our customer service line at 800528-0950.
Hardware Included
2 -12mm -1.75 x 70 bolts
2 -12mm lock washer
2 - Spacers
Installing the Bar
1. Locate the 3 studs on the front of each frame rail, behind the bumper cover.
NOTE - These are the 3 studs pointing forwards towards the outside.
2. Remove the nuts from each of the three studs. NOTE - Do not discard the
nuts, as they will be reused.
3. Position the light bar brackets over the 3 studs on each side that you removed
the nuts from.
4. Loosely install the upper nut on the left and right studs on the front of the
frame rails.
5. Locate the hole towards the rear of each light bar bracket.
6. Place the supplied spacer between the light bar bracket and the frame. Line
up with the rearward hole in each light bar bracket.
7. Insert and start the supplied bolt with lock washer, through the light bar
bracket, the spacer and the threaded hole of the frame.
8. Install the remaining nuts and tighten all on the 3 studs on each side of the
frame.
9. Tighten the supplied 12 mm bolts into the frame.
10. Your DONE! ---- Install your KC lights and enjoy.
23 Year Warranty
See details on our website at
www.kchilites.com
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3263X - rev 061406
IF YOU HAVE ANY PROBLEMS
OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950