KC HiLiTES KC 7425 Instructions

Installation Instructions for

Light Bar KC 7424, 74241 & 7425

2008 -11 Ford Super Duty F250/350

Thanks for choosing a KC HiLiTES product. We take pride in building the highest
quality, best engineered systems possible. Your satisfaction with our product is
important, so if you have any questions, please call our customer service line at 800­528-0950.

Removing the Bumper...

Before installing the KC light bar you

must remove the bumper bolts.

1. There are four bolts, two on either
side of the tow hooks located
through the gap in front of the
bumper (see photo A). Remove
them with an 18mm socket.

2. Let the bumper drop down. It will
only drop about 2 inches.

3. Retain the factory hardware (bolts
and nut plates), they will be
needed to secure the light bar.

Bumper

Bolts

Photo A

Installing the Light Bar...

23 Year Warranty

See details on our website at

www.kchilites.com

1. Hold the KC Light Bar up and align
the holes in the light bar, bumper
and frame, then start threading
the factory bolts in the nut plates
by hand.

2. Once all of the bolts are started,

align the bumper and tighten the
four bolts.

3. Install the KC Lights of your choice
and enjoy.

IF YOU HAVE ANY PROBLEMS

OR QUESTIONS, PLEASE CALL

CUSTOMER SERVICE AT 800-528-0950

KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3266E - 051010