KC HiLiTES KC 7413 Instructions
Installation Instructions for KC 7413
2-Tab Rear Tube Bumper
Jeep JK 2007 - 08
Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality,
best engineered systems possible. Your satisfaction with our product is important, so if you
have any questions, please call our customer service line at 800-528-0950.
Parts Included:
2 - Nut plate brackets 4 - 5/8 X 2 bolts
4 - 5/8 Flat washer 4 - 5/8 lock washer
Installing the Bumper
1. Remove the stock rear bumper.
2. Insert the nut plate brackets
provided into the inside of each
frame rail from the rear. NOTE They should be positioned to sit in
the bottom of the frame with the
nuts of the bracket aligning with
the large holes on the outside of
the frame.
3. Place the bumper on the frame
and loosely attach using the four
5/8 bolts each with a lock and flat
washer. NOTE - The 5/8 bolt with
lock and flat washer will insert through the bumper bracket, frame and
then into the nut plate brackets installed in step two.
4. Align the bumper and tighten all hardware.
5.The two light tabs near the center of the bumper will allow mounting of
small backup lights such as the KC #517 kit. (as pictured above)
You’re DONE! - - - - - - - Install your KC lights and enjoy.
23 Year Warranty
See details on our website at
www.kchilites.com
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3266N - rev 110308
IF YOU HAVE ANY PROBLEMS
OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950
Loading...