KC HiLiTES KC 7412 Instructions
Installation Instructions for KC 7412
2-Tab Front Tube Bumper
Jeep JK 2007 - 08
Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality,
best engineered systems possible. Your satisfaction with our product is important, so if you
have any questions, please call our customer service line at 800-528-0950.
Parts Included:
1 - KC Aluminum Skid Plate 8 - 7/16 X 1 Bolt
16 - 7/16 Flat washer 8 - 7/16 Nylock nut
6 - 1/4 X 5/8 Truss head bolt 6 - 1/4 Nylock not
Installing the Bumper
1. Remove the stock bumper, plastic
skid plate and upper filler panel.
NOTE - Unplug driving lights and
remove the harness clips from the
skid plate.
2. Install the supplied 7/16 flat
washer on each of the eight 7/16
X 1 bolts.
3. Hold the bumper in place with the
mounting surfaces of the bumper
mated to the mounting surface of
each frame rail and start each of
the 7/16 X 1 bolts through the bumper and through the frame.
4. Start a 7/16 flat washer and Nylock nut on each of the 7/16 X 1 bolts.
5. Tighten the eight nuts and bolts attaching the bumper to the frame.
6. Place the skid plate on the lower portion of the bumper and insert each of
the 1/4 inch truss head bolts through the skid plate and through each of
the mounting tabs, then start a nut on each of the bolts.
7.Tighten the six nuts and bolts attaching the skid plate to the bumper.
You’re DONE! - - - - - - - Install your KC lights and enjoy.
23 Year Warranty
See details on our website at
www.kchilites.com
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3266M - rev 110308
IF YOU HAVE ANY PROBLEMS
OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950
Loading...