KC HiLiTES KC 7409 Instructions

Installation Instructions for

Hood Mount Bar KC 7409

For 2007-08 Jeep JK

Thanks for choosing a KC HiLiTES product. We take pride in building the
highest quality, best engineered systems possible. Your satisfaction with
our product is important, so if you have any questions, please call our
customer service line at 800-528-0950.

Installing the Bar

1. The hood must be closed
and latched during
installation.

2. Remove the 4 Torx head
bolts from the hood
hinges and discard.

3. Place the light bar over
the hood hinges with the
light tabs towards the rear
of the vehicle.

4. Insert each of the 4 supplied hex bolts with washer through the
light bar brackets and mating holes in the hood hinges.

5. Loosely thread each bolt with washer by hand until all 4 bolts are
started. Note: The light bar brackets may need to be flexed in or
out to start the bolts correctly.

6. After the bar is aligned, tighten all hardware.

You’re DONE! - - - - - - - Enjoy your new KC product.

23 Year Warranty

See details on our website at

www.kchilites.com

KC HiLiTES, Inc. 2843 West Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC3266C - rev 012108

IF YOU HAVE ANY PROBLEMS

OR QUESTIONS, PLEASE CALL

CUSTOMER SERVICE AT 800-528-0950