Electrónica Integral de Sonido, S.A. reserves the right to make changes without prior notice. Electrónica Integral de Sonido, S.A. is not responsible for any errors or omissions
that may appear in this manual.
KBSOUND® STARUser Manual
EN
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. Contains FCC ID: A8TBM62S2.
FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement:
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.
1. Introduction
2. Basic Components & Features
3. Download KBSOUND STAR App
4. Bluetooth pairing and connection (A2DP profile)
between Device and Master
5. Operating KBSOUND STAR App
(Bluetooth Low Energy Connection -BLE)
6. Listen FM
7. Listen DAB
8. Listen Bluetooth Audio Streaming
9. Pair and listen other Bluetooth devices
for Bluetooth Audio Streaming
10. Bluetooth Disconnection
11. Settings
11.1 Auto power on
6
6
8
8
10
11
12
13
14
17
21
21
11.2 Ideal mode
11.3 DA B
11.4 Audio Channels
11.5 Speaker output (MASTER)
11.6 Line output (aux)
11.7 Bluetooth
11.8 Remote Control Accessory
11.9 Languages
12. Multi-Room: Bluetooth ID
13. Multi-Devices
14. Operating Mode
14.1 V olu m e
14.2 Notifications and phone calls
while operating
14.3 Reset to factory default
15. Auxiliar y Amplifier Option
16. Remote Control Accessory
17. Technical Specifications
22
23
24
24
25
25
26
26
27
30
31
31
32
33
34
35
38
5
5
4
2
1
3
1. Introduction
Our KBSOUND STAR combines the best of our iSelect and Select BT in one
product allowing you to choose between using a Remote Control or managing
the system using the STAR App. STAR technology synchronizes the commands
sent by the Remote Control and/or the App.
We have upgraded and enhanced the new App to allow the user to stream
music from other non–iOs or Android Bluetooth devices (A2DP profiles)
such as Computers, Televisions, etc... (See chapter 9).
KBSOUND® STARKBSOUND® STARUser ManualUser Manual
Bluetooth Audio
1
Receiver+FM Radio+DAB
(MASTER)
2
Speakers
3
FM/DAB Antenna
iOS/Android devices
4
5
KBSOUND STAR App
6
ENEN
EQ
External Bluetooth devices
6
(Computer, Amazon Alexa
devices, etc.)
7
2. Basic Components & Features
1
2
4
3
5
Remote Control Accessory
7
(If purchased)
The MASTER (1) is an electronic module that allows you to enjoy three
music channels: Bluetooth audio streaming, FM Radio and DAB Radio.
The device (4) is any smartphone or tablet based on iOS or ANDROID
with Bluetooth Low Energy (BLE) and the following Bluetooth profiles:
A2DP, AVRCP (for sending audio).
The KBSOUND STAR App (5) is the App for managing the MASTER (1).
It can be downloaded from Apple App Store (for iOS devices) or Google
Play Store (for ANDROID devices). The KBSOUND STAR App is
compatible with iOS 10.0 and higher and ANDROID 4.4 and higher.
The external device (6) is any Bluetooth device (A2DP, AVRCP profiles)
from which you wish to stream Audio.
See also chapter 16 for management when using the Remote Control
Accessory if purchased separately.
Warning: The KBSOUND STAR
App runs on different releases
from different operating systems,
using different devices from
different brands.
As a result, its functioning
may present some differences
between devices.
67
KBSOUND® STARKBSOUND® STARUser ManualUser Manual
PIN 4582
KBSOUND STAR
Bluetooth
0001 KBSOUND STAR Connected
MY DEVICES
0
1
GHI
PQRS
4
7
2
ABC
JKL
TUV
5
8
MNO
WXYZ
3
6
9
DEF
JF14 FREEDOM Not Connected
BT 140401 Not Connected
ENEN
3. Download KBSOUND STAR App
3.1 iOS DEVICES
Tap the Apple App Store on the iOS device to
download the KBSOUND STAR App.
4. Bluetooth Pairing and Connection
3.2 ANDROID DEVICES
Tap the Google Play Store on the ANDROID
device to download the KBSOUND STAR App.
1. Open iOS/Android Bluetooth Settings Menu.
2. Select the KBSOUND STAR Bluetooth ID (e.g. 0001 KBSOUND STAR).
3. Introduce the password (e.g. 4582). Needed only when pairing, not in future connections.
4. Check that the MASTER (e.g. 0001 KBSOUND STAR) is correctly connected.
iOS:
KBSOUND STAR
Bluetooth
DEVICES
0001 KBSOUND STAR
PIN 4582
1
4
GHI
7
PQRS
Bluetooth
MY DEVICES
3
2
ABC
DEF
6
5
MNO
JKL
9
8
WXYZ
TUV
0
JF14 FREEDOM Not Connected
0001 KBSOUND STAR Connected
BT 140401 Not Connected
ANDROID:
(A2DP profile) between Device and Master
The first time the Device is paired with the Master,
the KBSOUND STAR Bluetooth identifier and
password will be the factory default. This data can
be found on the label provided with the “Quick
reference guide” and on the Master. Each Master
BLUETOOTH ID:
0001 KBSOUND STAR
PASSWORD:
4582
MAC address:
00 : 00 : 00 : 00 : 00 : 00
0001 KBSOUND STAR
Bluetooth pairing request
0001 KBSOUND STAR
4582
has a UNIQUE Bluetooth identifier and password.
Please make sure you keep a copy of the label
in a safe place.
Master
89
0001 KBSOUND STAR
Connected
Note: the above
process is just
an example
(GOOGLE NEXUS 5 /
ANDROID 5.0.1) since
different devices have
different configurations
for different brands,
models and versions.
KBSOUND® STARKBSOUND® STARUser ManualUser Manual
Cancel
Pair
ENEN
5. Operating KBSOUND STAR App
(Bluetooth Low Energy Connection–BLE)
To control the system it is necessary to pair the App with the MASTER as follows:
1. The first time the App is launched the list of
devices is empty. Tap the “Pair a new device” button
to search the available MASTERS within range.
2. All the MASTERS within range will appear in the
screen. Select the MASTER with which you wish to
connect the App.
3. The first time the App is connected with the
MASTER the KBSOUND STAR Bluetooth ID and
password will be the factory default. (See chapter 4).
4. Introduce the password.
Enter PASSWORD
1234 KBSOUND STAR
PASSWORD
1
4
GHI
7
PQRS
3
2
ABC
DEF
6
5
MNO
JKL
9
8
WXYZ
TUV
0
KBSOUND
Select a previously paired devide
1234 KBSOUND STAR
Pair a new device
Forget
5. Now the device has been added to the list of paired
devices. Tap on the KBSOUND STAR identification
to connect.
6. Tap the MASTER (ON) button to switch ON/OFF
the system.
7. If you wish to add further KBSOUND STAR units
press the name of the MASTER at the bottom of
the screen and follow the same process from the
beginning. Only one device can be connected at
any time one.
MasterAux
KBSOUND
1234 KBSOUND STAR
KBSOUND
1234 KBSOUND STAR
6. Listen FM
Turn on the MASTER and select the FM audio channel.
Current FM
tuner station
frequency
jump to the
FM FAVORITES
SCREEN
RDS information
about current FM
tuner station
FM sensitivity
for scan
jump to the
EQ SCREEN
volume
Tap on the number
if you wish to jump
in the screen to directly
key in the FM station
frequency.
KBSOUND
DAB
FM
95.8
ESRADIO
Scan level
Ideal
1234 KBSOUND STAR
KBSOUND
DAB
FM
95.8
ESRADIO
23
1
456
789
.0
cancel
FM MONO
intro
MasterAux
ON / OFF
audio channels buttons
add/remove FM favorites
(long press 4” to remove)
manual dialing
scan
FM forced mono
SettingsBass
MasterAux
jump to the SETTINGS SCREEN
set ideal mode
(long press 4” save ideal mode)
Bluetooth ID. Tap to open
the window which will show
the devices available and allows
you to connect with another one
if you wish.
Warning: some ANDROID’s, after clearing
the pairing, do not clear all of their internal data and
to pair again will require resetting the MASTER to
factory default (see chapter 14.3), which means that
Tested with:
SAMSUNG GALAXY J3 (ANDROID 9)
ASUS X008D (ANDROID 7)
all the devices paired will be deleted and they will
have to be paired again.
1011
KBSOUND® STARKBSOUND® STARUser ManualUser Manual
Go and play your music whether it is streaming
Internet music services or music from your own library
ENEN
7. Listen DAB
Turn on the MASTER and select the DAB audio channel.
jump to the
DAB FAVORITES
SCREEN
information about
current DAB station
jump to the
EQ SCREEN
volume
KBSOUND
FM
BBC5 RADIO LIVE
BBC WORLD SERVICEUCB UK RADIO
INFORMATION RECEIVED DAB RADIO
1234 KBSOUND STAR
MasterAux
DAB
Ideal
SettingsBass
The App in each Bluetooth device (iOS/Android) allows you to store its own
list of FM favorites and its own list of DAB favorites. These lists are managed
only by the App in each device, never using the Remote Control Accessory.
Moreover, the MASTER unit can store a (unique) list of 10 FM memories
and a (unique) list of 10 DAB memories. They are managed only
by the Remote Control Accessory. (See chapter 16).
ON / OFF
audio channels buttons
add/remove DAB favorites
(long press 4” to remove)
next/previous station
jump to the SETTINGS SCREEN
set ideal mode
(long press 4” save ideal mode)
Bluetooth ID. Tap to open
the window which will show
the devices available and allows
you to connect with another one
if you wish.
8. Listen Bluetooth Audio Streaming
Select the Bluetooth audio channel if you wish to stream music from your
smartphone. The details of your device will appear on the screen as you have
previously paired the device (see chapter 4).
BT Key status:
KBSOUND
DAB
FM
iPhone 8
Bluetooth Audio Streaming
Hope of deliverance
Paul McCartney
The very best
Ideal
1234 KBSOUND STAR
MasterAux
SettingsBass
ON / OFF
disconnect BT
Audio device
(A2DP)
name of the
device which
is connected
information
about the current
streaming
Any App sending Bluetooth audio streaming can be used as
source of audio: Music Player, Spotify, Tune In Radio…
Take note that some Apps pause the audio when they are in the
background and only play audio when they are in the foreground
(for example YouTube in iOS).
No BT audio device connected (A2DP)
BT audio device connected (A2DP)
(ashing) Waiting for pairing and connecting
with BT audio device (A2DP)
BT audio device streaming (A2DP)
1213
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.