KBSOUND BT User And Installation Manual

BT

1. Components

2. Hardware installation

3. App installation

IOS
ANDROID

4. Bluetooth pairing and connection

IOS

5. Listen FM

6. Listen Bluetooth streaming audio

7. Annex: Settings and Bluetooth naming

ANDROID

Bluetooth

KBSOUND

user and installation manual

1/12

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

BT

1. Components

(A) Master electronic module
(B) mains cable
(C) FM antenna
(D) and (E) speakers and audio cable

B

C

D E

2/12

A

120/230Vac

L

L

R

R

62

65

66

4

FM antenna
(75cm)

2. Hardware installation

1. connect the speakers (D) and (E) to terminals L+, L- R+, R- (

2. connect the FM antenna (C) to the FM connector

3. connect to the mains (120/230Vac)

note: terminals 65,66,4,62 unconnected)

the cable (B)

D

E

C

B

Master

factory defaults

BT

3/12

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

F N

3.1. App installation (IOS)

1. open iTunes in the computer

2. in iTunes: if the App KBSOUND is already in iTunes library, delete it

3. in iTunes: add the App file (KBSOUND-IOS-V0.XX .ipa) to iTunes library

BT

4/12

4.
connect the smartphone to the computer

6. in iTunes: select the smartphone

7. in iTunes: select Aplications

8. in iTunes: select the App KBSOUND to be installed to the smartphone

9. in iTunes: apply changes

10. when finish, be sure that the app KBSOUND has been installed in the smartphone

11.

in the smartphone: if the App is already installed in the smartphone, uninstall it

5.

IMPORTANT: disconnect the smartphone from the computer

BT

5/12

3.2. App installation (ANDROID)

the following process is just an example (Google Nexus 5 / Android 5.0.1) since different smartphones have different configurations
for different brands, models and versions

1. connect the smartphone to the PC

2. in the PC: upload the the App file (KBSOUND-ANDROID-V0.XX .apk) to the folder DOWNLOADS in the smartphone

3. disconnect the smartphone from the computer

BT

6/12

4. in the smartphone: go to any file explorer and run the App file recently downloaded

5. when finish, be sure that the app KBSOUND has been installed in the smartphone

(note: if any issue, desinstall previous version of the App from the settings menu)

BT

7/12

4.1. Bluetooth pairing and connection (IOS)

before operating the KBSOUND App it is necessary to be correctly paired and connected with the Master

1. go to IOS Bluetooth settings menu

2. select the Master Bluetooth ID (e.g. )

3. introduce the password (e.g. )

4. check that the Master is correctly
connected

0001 KBSOUND BT

1234

(e.g. )0001 KBSOUND BT

1234

BT

8/12

0001 KBSOUND BT

0001 KBSOUND BT

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

Master

4.2. Bluetooth pairing and connection (ANDROID)

before operating the KBSOUND App it is necessary to be correctly paired and connected with the Master

1. go to ANDROID Bluetooth settings menu

2. select the Master Bluetooth ID

3. introduce the password (e.g. )

4. check that the Master is correctly connected

the following process is just an example (Google Nexus 5 / Android 5.0.1) since different smartphones have different configurations
for different brands, models and versions

(e.g. )

(e.g. )

0001 KBSOUND BT

0001 KBSOUND BT

1234

BT

9/12

1234

0001 KBSOUND BT

0001 KBSOUND BT

0001 KBSOUND BT

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

Master

5. Listen FM

1. open the App KBSOUND

2. FM Screen permits to enjoy FM and save favorites FM station in the favorites list

ON / OFF

ideal mode

volume

jump to Settings Screen

(see annex)

FM Favorites Screen

Master Bluetooth ID

and jump to Bluetooth Naming Screen

add to favorites

manually dial

scan

FM sensitivity
for scan

FM Screen FM Favorites Screen

information about FM tuner station

(frequency and RDS)

BT

choose Bluetooth Streaming Audio
and jump to Bluetooth Streaming
Audio Screen

10/12

delete from favorites

6. Listen Bluetooth streaming audio

1. Bluetooth Streaming Audio Screen permitis to enjoy Bluetooth streaming audio from Music Player

2. Go to Music Player in the smartphone, choose the music to be listened and play it

3. Go back to the KBSOUND App and control the volume and equalization mode

Bluetooth Streaming ScreenAudio Music Player

ON / OFF

ideal mode

volume

Equalization

Screen

Equalization Screen

jump to Settings Screen

(see annex)

Master Bluetooth ID

and jump to

Bluetooth Naming Screen

BT

choose FM and
jump to FM Screen

11/12

7. Annex: Settings and Bluetooth Naming

These two screens are for some settings available in the Master electronic module

jump to the previous screen

when this switch is enabled, the ON/OFF button
will activate the Master Module

when this switch is enabled, the ON/OFF button
will activate the Slaves Modules

when this switch is enabled, the Master Module will
turn ON when fed from the mains (230/120Vac)

when this switch is enabled, the Slaves Modules will
turn ON when fed from the mains (230/120Vac)

save current audio settings as "ideal mode"
(volume, equalization, FM/BT and, if FM,
the station tuned at this moment)

jump to About Screen

Keep the FM ON

OUT OF RANGE

Keep the FM ON or turn OFF automatically
when Master loses the Bluetooth connection

audio settings for auto-power-on start-up mode

when the connection between Master and the smartphone is
lost, the Master/Slaves can be kept ON or turn OFF automatically

Settings Screen

95.5MHz Vol+10 Eq:Loudness

Bluetooth Naming Screen

IMPORTANT NOTE: Take care when change

the Bluetooth ID and/or the Password since you will need it to

connect again with the Master. If you forget it, reset the Master to the

factory defaults

hold the button pressed for 4" to reset to factory defaults

BT

1234

edit the Master Bluetooth ID

edit the password

factory defaults

BLUETOOTH ID:

0001 KBSOUND BT

PASSWORD:

1234

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void
the user's authority to operate the equipment.

FCC Statement:
"This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help."

RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour
un environnement non contrôlé.

iPod and iPhone is trademark of Apple Inc. registered in teh U.S. and other countries. "Made for
iPod" and "Made for iPhone" means that an electronic accessory has been designed to connect
specifically to iPod and iPhone and has been certified by Electrónica Integral de Sonido S.A. to meet
Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accesory with
iPhone may affect wireless performance.

Electrónica Integral de Sonido S.A. is not responsible for any error or omissions that may appear in
this manual, and reserves the right to make changes without prior notice.

CC-1196-00.3
64460111

AENOR

Registrada

Empresa

ER-0634/1998

[e-mail]

Polígono Malpica Calle F Oeste
Grupo Gregorio Quejido, 87-88
50016 Zaragoza (SPAIN)
Tel.: [phone]
Fax: [phone]

www.eissound.com

1:1

FC-036-05

Material

Material

Denominación

Denomination

Escala

Scale

Código Documento

Document Code

Edición

Edition

Aprobado

Approved

Proyectado

Projected

Dibujado

Drawn

Nombre

Fecha

Date

Name

Código Pieza

Part Code

Din A4

CC-1196ENG

KBSOUND BT

USER AND INSTALLATION

MANUAL

02/02/2015

L.ABOS

SOPORTE:

TINTA:

64460111

this page is not included in the manual

00.3

L.ABOS

30/04/2015

FORMATO PDF

L.ABOS