KBC FTL1-S2-MSC User Manual

FTL1-S2-MSC

User Manual

Manual-FTL1-Rev1009.pdf Page 2 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd.

Table of Contents

1. Overview ...........................................................................3

1.1 Introduction:……………………….……………………………..3

1.2 Technical Specification……………………………...………….3

1.3 Warranty .…………………...……………………….…..……...4

1.4 Instruction of Disassembly………………...……….…..……...5

2. Installation ........................................................................6

2.1 Package Contents ………………………………………..…....6

2.2 Transceiver Enclosure ..........................................................6

2.3 Caution ..............................................................................…7

2.4 Install Application ..............................................................…8

3. Dimensions .......................................................................9

Manual-FTL1-Rev1009.pdf Page 3 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd.

1. Overview

1.1 Introduction

The FTL1-S2-MSC Series 10/100M Auto-Sensing Ethernet Multi-mode Fiber Optic
Transceiver is designed using advanced fiber optic technology. This series transmit and
receive 10/100 Mbps (no adjustment is required) data over two single-mode optical fibers,
extending the Ethernet transmission distance from its normal few hundred meters to 25
kilometers. By using optical fiber as transmission media, this series continue to perform its
secured, high-speed and long-distance communication even under the adverse condition
such as lighting, power surge and electromagnetic interference; substantial saving on
lighting and power surge protection equipments if copper wires were used.

The FTL1-S2-MSC Series is fully assembled using SMT components for stability and
reliability.

1.2 Technical Specification

ETHERNET

Supporting standards IEEE802.3 10Base-T, 100Base-T
Data Rate 10/100Mbps auto-sensing, Full Duplex or Half

Duplex

Physical Interface RJ45, DCE interface

OPTICAL

Number of Fibers 2
Wavelength 1310nm
Fiber Type 9/125μm(SM)
Distance 0~25km
Connector Type ST/PC