KBC FDVA4-S4R-WSC User Manual

FDVA4-S4R-WSC

User Manual

Table of Contents

1. Overview ...........................................................................3

1.1 Introduction:……………………….……………………………..3

1.2 Technical Specification……………………………...………….3

1.3 Warranty .…………………...……………………….…..……...4

1.4

Instruction of Disassembly………………...……….…..……...5

2. Installation:......................................... ...............................6

2.1 Package Contents ………………………………………..…....6

2.2 Receiver Enclosure ..............................................................6

2.3 Caution..................................................................................7

2.4 Install Application

..................................................................8

3. Dimensions .......................................................................9

Manual-FDVA4-Rev1008.pdf Page 2 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd.

1. Overview

1.1 Introduction

The FDVA4-S4R-WSC series is designed using advanced ASIC and high-speed DSP
technologies. This series employs multiplexing and de-multiplexing techniques to receive 4
channels of video over 4 multi-mode optical fibers in all digital signaling with no
compression; making it ideal for applications where input signal integrity and quality must
be maintained and no loss should be induced. Because it utilizes all-digital,
non-compression technology, it is able to transmit signals without distortion; whereas the
analog technology inherently noisy, low quality, long term instability and susceptible to
electromagnetically and environmental interference. This series accepts a variety of video
inputs, such as analog or digital video recorder, DVD/VCD, digital camera, and CCTV. PAL,
NTSC and SECAM standards are supported. Plug-and-Play design ensures ease of
installation and no electrical or optical adjustment is required. LED indicators are provided
for showing operating status.

This series is fully assembled using SMT components for stability and reliability.

1.2 Technical Specification

VIDEO

Number of Channels 4
Signal Level 1.0VPP typical, 1.5VPP max.,75Ω
Differential Gain < 2%
Differential Phase < 2º
Signal to Noise Ratio (SNR) 62dB typical
Connector Type BNC

OPTICAL

Number of Fibers 4
Wavelength 1310nm
Fiber power budget ≤ 15dB
Fiber Type 9/125μm(SM)
Distance 0 ~ 25km
Connector Type ST/PC

Manual-FDVA4-Rev1008.pdf Page 3 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd.