KBC FDVA4-DB1-M1T-R-WSC User Manual

FDVA4-DB1-M1T-WSC

FDVA4-DB1-M1R-WSC

User Manual

Table of Contents

1. Overview ...........................................................................3

1.1 Introduction:……………………….……………………………..3

1.2 Technical Specification

1.3 Warranty

Instruction of Disassembly………………...……….…..……...6

1.4

................................................................................5

……………………………...………….3

2. Installation:........................................................................7

2.1 Package Contents .................................................................7

2.2 Transmitter Enclosure ...........................................................7

2.3 Receiver Enclosure ...............................................................10

2.4 Caution ..................................................................................12

2.5 Install Application ...............................................................…13

3. Dimensions .......................................................................14

1. Overview

1.1 Introduction

The FDVA4-DB1-M1T-WSC/FDVA4-DB1-M1R-WSC series is designed using advanced ASIC and high-speed DSP technologies. This series employs multiplexing and de-multiplexing techniques to transmit and receive 4 channels of video, 1 channel of bi-directional RS232/RS422/2 wires RS485/4 wires RS485 data over a multi-mode optical fiber in all digital signaling with no compression; making it ideal for applications where input signal integrity and quality must be maintained and no loss should be induced. Because this series utilizes all-digital, non-compression technology, it is able to transmit signals without distortion; whereas the analog technology inherently noisy, low quality, long term instability and susceptible to electromagnetically and environmental interference. This series accepts a variety of video inputs, such as analog or digital video recorder, DVD/VCD, digital camera, and CCTV. PAL, NTSC and SECAM standards are supported. It can support standard RS232/RS422/2 wires RS485/4 wires RS485 pan-tilt-zoom control signaling. Plug-and-Play design ensures ease of installation and no electrical or optical adjustment is required. LED indicators are provided for showing operating status.

The FDVA4-DB1-M1T-WSC/FDVA4-DB1-M1R-WSC series is fully assembled using SMT components for stability and reliability.

1.2 Technical Specification

VIDEO

Number of Channels 4 Signal Level 1.0VPP typical, 1.5VPP max.,75Ω Differential Gain < 2% Differential Phase < 2º Signal to Noise Ratio (SNR) 62dB typical Connector Type BNC

DATA

Number of Channels 1, bi-directional Interface RS232/RS422/2 wires RS485/4 wires RS485 RS-232 Data Rate DC − 115.2kbps RS-422/485 Data Rate DC − 250kbps RS-422/485 Distance 0 − 1200m

RS-422/485 Signaling

Transparent to all RS422/485 signaling; Compatible to 2 wires RS485/ 4 wires RS485.

Connector Type Terminal

OPTICAL

Number of Fibers 1 Wavelength 1310nm (Transmitter) 1550nm (Receiver) Optical Out Power ≥ -8 dB ≥ -8 dB Optical Sensitivity Fiber power budget Effective Fiber power budget

≤ -20 dB ≤ -20 dB ≤ 12 dB ≤ 12 dB ≤ 12 dB

Fiber Type 62.5/125μm(MM) Connector Type ST/PC Distance 0 ~ 2km

GENERAL

Operating Temperature -40 ~ 70˚C / -40 ~ +158ºF Relative Humidity 0 ~ 95% non-condensing Mean Time Between Failure(MTBF) > 100,000hrs

Power Supply Adaptors

Input: 100~240VAC, 50/60Hz,0.5A Output: +12VDC, 2A

Enclosure Color Silver

Dimensions (L×W×H) 223mm×158mm×36mm/8.78”×6.22”×1.42”

1.3 Warranty

 Repair

 Please contact your local distributors when product is defective. Please apply RA in

advance and prepay shipping cost when returning the defective product to us. We will pay the cost for sending it back to you.

 Please attach a statement clearly describing the problem.

 We will repair defective product under warranty free of charge to our customer.  5 years warranty for product only.  Any unauthorized modification of hardware and software voids the warranty.  Warranty does not cover mishandling and/or abuse of the product.

Products comply with the following Safety Label for International Fiber Communication Equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful Interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense.

Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

+ 9 hidden pages