KBC FCHA1-M1T-R-WSB User Manual

Download

Fiber Optical Transceiver

for Up-the-Coax

User Manual

Table of Contents

0. Product Type..............................................................................................1

1. Overview.....................................................................................................1

1.1 Introduction ..........................................................................................................1

1.2 Features ...............................................................................................................1

1.3 Technical Specification ....................................................................................... 2

2. Package Contents ......................................................................................2

3. Product Enclosure.....................................................................................3

3.1 Transmitter ........................................................................................................... 3

3.2 Receiver ............................................................................................................... 4

4. Caution.......................................................................................................6

5. Typical Application....................................................................................6

6. Dimensions.................................................................................................8

7. W arranty....................................................................................................9

8. Instruction of Disassembly .....................................................................10

0. Product Type

Configuration

User Manual

Fiber

SM MM

ST/PC SC/PC FC/PC

1. Overview

1.1 Introduction

The KBC FCHA1 series video and data transmission system is designed for full

compatibility with ‘Up-the-Coax’ video/data systems from major manufactures such as

Bosch Bi-Linx., and others. This series supports simultaneous 10-bit digitally encoded

video and “up the coax” data over one multimode or singlemode fiber. Plug-and-play

design ensures ease of installation requiring no electrical or optical adjustments. This

series features two optional contact closure circuits that allow two additional devices

such as dome tamper switches or alarm inputs to be added. LED indicators are

provided to clearly show the operaional status of the unit.This series is available in

wall mount ,rack mount,or 3U classis card configurations.

1.2 Features

z Transmission of Video and ‘Up-the-Coax’ Data

z 10-Bit Digitally Encoded Video Transmission

z Exceeds RS-250C Short-Haul Transmission

z 2 channel Bi-Directional Contact Closure circuits optional

z BBV , Bosch ,Pelco or Honeywell selectable

z No Electrical or Optical Adjustments Required

z LED indicators are provided quick diagnosis of all system parameters

z Singlemode & Multimode models.

User Manual

z Wall mount ,rack mount and 3U classis card configerations

z Special technique is used to extend Bi-Linx transmission distance, the distance

depends on optical power.

1.3 Technical Specification VIDEO

Signal Level 1.0V

typical, 1.5V

P-P

max.,75Ω

P-P

Sampling Resolution 10 bit Differential Gain < 1% Differential Phase < 1º Signal to Noise Ratio (SNR) 67dB typical Connector Type BNC

CONTACT CLOSURE

Contact Max. voltage/current 25V/0.8A(DC), 110V/0.4A(AC) Connector Type Terminal

OPTICAL SM MM

Wavelength 1310nm 1550nm 1310nm 1550nm Optical Out Power ≥ -10 dB ≥ -10 dB ≥ -11 dB ≥ -11 dB Optical Sensitivity

≤ -30 dB ≤ -30 dB ≤ -26 dB ≤ -23 dB

Effective Fiber power budget ≤ 20 dB ≤ 12 dB Fiber Type 9/125μm 62.5/125μm Distance 0 ~ 30km 0 ~ 4km

GENERAL

Operating Temperature -40 ~ 70˚C / -40 ~ +158ºF Relative Humidity 0 ~ 95% non-condensing

Power Supply Adaptor

Input: 100~240VAC, 50/60Hz,0.5A

Output: +12VDC, 2A Mean Time Between Failure(MTBF) > 100,000hrs Enclosure Color Silver Housing Wall mount

2. Package Contents

One Transmitter One Receiver One User Manual

3. Product Enclosure

3.1 Transmitter

Connectors:

User Manual

C1: Channel 1 Contact Closure input.

C2: Channel 1 Contact Closure output.

C3: Channel 2 Contact Closure input.

C4: Channel 2 Contact Closure output.

Terminal pins assignment:

Channel 1 contact closure input “A”

Channel 1 contact closure input “B”

Channel 1 contact closure output “A”

Channel 1 contact closure output “B”

Channel 2 contact closure input “A”

Channel 2 contact closure input “B”

Channel 2 contact closure output “A”

Channel 2 contact closure output “B”

DIP Switch setup table:

DIP Switch pin name

D1 D2

D3,D4

Bosch or Pelco BBV Honeywell

OFF OFF ON

OFF ON ON

Non functional/Reserved

Connectors:

DC or AC Power Supply between 12V and 24V can be used on this product.

• DC:

＋: +12VDC~+24VDC

－: Power Supply Ground

• AC:

There is no difference between ＋/－; the power supply can be connected into

the device directly.

FIB: Fiber Optic connector.

GND: Ground pin.

LEDs Definition:

User Manual

POW: Power Supply. On if power input is in OK. FIB: Fiber Link. Off if the link is in OK. V: Video. On if video input is in OK. C1: Channel 1 Contact Closure input. On if the contact input is closed. C2: Channel 1 Contact Closure output. On if the contact output is closed. C3: Channel 2 Contact Closure input. On if the contact input is closed. C4: Channel 2 Contact Closure output. On if the contact output is closed.

The other is reserved.

3.2 Receiv er

Connectors:

C1: Channel 1 Contact Closure input.

C2: Channel 1 Contact Closure output.

C3: Channel 2 Contact Closure input.

C4: Channel 2 Contact Closure output.

Terminal pins assignment:

Channel 1 contact closure input “A”

Channel 1 contact closure input “B”

Channel 1 contact closure output “A”

Channel 1 contact closure output “B”

Channel 2 contact closure input “A”

Channel 2 contact closure input “B”

Channel 2 contact closure output “A”

Channel 2 contact closure output “B”

Connectors:

DC or AC Power Supply between 12V and 24V can be used on this product.

• DC:

User Manual

＋: +12VDC~+24VDC

－: Power Supply Ground

• AC:

There is no difference between ＋/－; the power supply can be connected into

the device directly.

FIB: Fiber Optic connector.

GND: Grounded pin.

User Manual

LEDs Definition:

POW: Power Supply. On if power input is in OK. FIB: Fiber Link. Off if the link is in OK.

V: Video. On if video output is in OK. C1: Channel 1 Contact Closure input. On if the contact input is closed. C2: Channel 1 Contact Closure output. On if the contact output is closed. C3: Channel 2 Contact Closure input. On if the contact input is closed.

C4: Channel 2 Contact Closure output. On if the contact output is closed.

The other is reserved.

4. Caution

• Switch off all power supply before installation.

• Ensure fiber is properly aligned to the Fiber connector.

• Do NOT stare at the fiber core.

5. Typical Application

Coax Cable

User Manual

6. Dimensions

User Manual

115.5

155

3.8

111

118

User Manual

7. Warranty

 5 years warranty for product only.  Repair

 Please contact your local distributors when product is defective. Please apply

RA in advance and prepay shipping cost when returning the defective product to us. We will pay the cost for sending it back to you.

 Please attach a statement clearly describing the problem.

 We will repair defective product under warranty free of charge to our customer.  Any unauthorized modification of hardware and software voids the warranty.  Warranty does not cover mishandling and/or abuse of the product.

Products comply with the following Safety Label for International Fiber Communication Equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful Interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense.

Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

User Manual

8. Instruction of Disassembly

Instruction of Disassembly of KBC Product

(For EU Directive 2002/95/EEC━WEEE)

Tools Required:

1) 5 mm flat tip screwdriver

2) Φ3 cross tip screwdriver

3) Φ5 cross tip screwdriver

4) Size small snip nose pliers

5) 15 mm spanner

Steps for Disassembly:

1) Remove tightening screws of box cover (1 or 4-8 screws in general);

2) Remove lock nut for BNC with spanner;

3) Remove cover plate;

4) Remove tightening screws for printed circuit board (PCB);

5) In case the assembly has more than one PCB then continue removing the remain tightening screws until none left;

6) Use snip nose pliers to loose the nut of flange and then remove optic cable connector (jump wire);

7) Snip off power conducting cable and remove power switch /jack/etc.;

8) Take out all PCBs;

9) Disassembly of product completed.

Notice：When a product reaches the end of it’s life—return to KBC

Headquarters:

KBC Networks, Ltd.

25691 Atlantic Ocean Drive,

Suite B3

Lake Forest, CA 92630

U.S.A.

Main: 1-949-297-4930

Fax: 1-949-297-4933

KBC Networks Ltd., EMEA

Carlton Suite, Barham Court

Teston, Maidstone

Kent ME18 5BZ

United Kingdom

Office: +44(0)1622618787

Fax: +44(0)2071008147

Email: info@kbcnetworks.com

Web: www.kbcnetworks.com

KBC FCHA1-M1T-R-WSB User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual