KBC ESUG4P-PG2 User Manual

Ethernet Switch

User Manual

ESUG4P-PG2

Ethernet Switch User Manual

TABLE OF CONTENTS

1 OVERVIEW ................................................................................. 3

1.1 INTRODUCTION ............................................................................................ 3

1.1.1 ESUG4P-PG2 ...................................................................................... 3

1.2 TECHNICAL SPECIFICATION .............................................................................. 4

2 INSTALLATION ............................................................................. 5

2.1 PACKAGE CONTENTS ...................................................................................... 5

2.2 CONFIGURATIONS ......................................................................................... 5

2.2.1 Physical Connections ........................................................................... 6

2.3 INSTALLATION METHOD ................................................................................... 7

2.3.1 DIN Rail Mount ................................................................................... 7

2.3.2 Wall-mount ........................................................................................ 7

2.4 ETHERNET RJ45 CONNECTIONS ......................................................................... 7

2.5 SFP PORTS ................................................................................................. 8

2.6 POWER CONNECTIONS .................................................................................... 8

2.7 FAULT ALARM CONTACT ................................................................................... 9

2.8 LED STATUS ............................................................................................. 10

3 TROUBLESHOOTING .................................................................... 11

3.1 SELF-TESTING ........................................................................................... 11

4 SYSTEM EXAMPLE ....................................................................... 12

5 DIMENSIONS ............................................................................. 12

6 WARRANTY .............................................................................. 13

6.1 WARRANTY INFORMATION .............................................................................. 13

6.2 CLASS A ITE ............................................................................................ 14

6.3 FCC ....................................................................................................... 14

7 INSTRUCTION OF DISASSEMBLY ...................................................... 14

Ethernet Switch User Manual

1 Overview

1.1 Introduction

This manual covers the ESUG4P-PG2 series. KBC Networks’ ESUG4P-PG2 products are high performance, unmanaged, six port industrial PoE Ethernet switches designed for use in a wide range of operating temperatures in nonenvironmentally conditioned, industrial applications. The units have redundant power supply terminals and an alarm output. All copper ports are automatically configured and the plug-and-play design provides ease and speed of installation.

1.1.1 ESUG4P-PG2

The ESUG4P-PG2 provides connectivity for up to four, 10/100/1000 RJ45 twisted pair copper ports which are capable of simultaneously supplying IEEE802.3at PoE and two gigabit SFP ports. Each of the four, 10/100/1000 RJ45 ports supports a self-adaptive function allowing it to be configured to 10Base-T, 100Base-TX or 1000Base-T, full or half duplex operation mode. It is available as either DIN rail or wall-mount configurations.

Ethernet Switch User Manual

ESUG4P-PG2

Switching

Mode

Store-and-forward

Switching rate

14,881pps, 148,810pps or 1,488,100pps

Backplane switching bandwidth

12Gbps

Mac address table

Ports

SFP

Physical port

2 x 1000 SFP

Copper

Physical port

4 x shielded RJ45

RJ45 port

10BASE-T/100Base-TX/1000BASE-T

Auto-negotiation

Standard

IEEE 802.3

Transmission distance

<100m

PoE

Physical port

4 x shielded RJ45

Standard

IEEE 802.3at

Power supplied (per port)

30W @ +55Vdc

Electromagnetic compatibility

Interference

EN55022 Class A

Immunity

IEC61000-6-2

Power

Input voltage 50 - 57Vdc

Power consumption

5.5W (no PoE)

125.5W ( full load PoE)

Power supply

Supplied separately

Environmental

Operating temperature

-40°C - +74°C / -40°F - +165°F

Storage temperature

-40°C - +74°C / -40°F - +165°F

Relative humidity

5% - 95%, Non-condensing

Mean Time Between Failure

>300,000 hours

Mechanical

Dimensions (W x H x D)

60mm x 152mm x 105mm

2.35” x 5.98” x 4.13”

Protection class rating

IP30

Weight

850g 1lb 14oz

1.2 Technical Specification

Ethernet Switch User Manual

Product Type

DIN Rail

Wall-mount

ESUG4P-PG2



2 Installation

2.1 Package Contents

 Ethernet switch fitted with DIN rail mount.  2 x Wall-mount brackets with screws  Pluggable terminal block  Quick Start Guide

Note: A 50 – 57Vdc PSU is required but supplied separately.

Please contact you dealer or distributor if a part is missing or damaged.

2.2 Configurations

Products are available in either DIN rail or wall-mount packages, with the following configurations:

+ 10 hidden pages